Industrial Machinery - European Quality Standard

CE Certification for Industrial Machinery

European machinery legislation stipulates that all machinery and safety components may only be placed on the market and put into service if they do not compromise the safety and health of persons, domestic animals, and property.

To be compliant, machines must be correctly designed and constructed, properly installed, maintained in good working order, and used according to their intended purpose.

Reference Legislation: Machinery Directive and new EU Regulation

Machinery compliance is governed by Directive 2006/42/EC, which is being progressively replaced by the new Regulation (EU) 2023/1230.

The new regulation introduces important updates, including:

integration of software and artificial intelligence into safety requirements
increased focus on machinery cybersecurity
digitalization of technical documentation
strengthening of obligations for manufacturers, importers, and distributors

Essential machinery safety requirements

Machinery must comply with the essential health and safety requirements set out in European legislation. These requirements cover:

safe design
prevention of mechanical and electrical risks
ergonomics and correct use
operator protection

CE marking for machinery: manufacturer obligations

To place a machine on the European market, the manufacturer (or their authorized representative in the EU) must:

draw up the EU declaration of conformity
prepare the technical file
affix the CE marking to the machine
ensure compliance with regulatory requirements

The CE marking certifies that the machine complies with applicable European legislation.

Machinery conformity assessment

Before commercialization, it is mandatory to carry out a conformity assessment.

Standard machinery

For machinery not belonging to high-risk categories, internal production control and the preparation of the technical file are sufficient.

High-risk machinery

For more hazardous machinery, an EU type-examination or total quality assurance is required, with the mandatory intervention of a notified body.

SIL Certification – Safety Integrity Level (IEC 62061)

The Safety Integrity Level (SIL) is a parameter defined by the IEC 62061 standard that measures the level of safety integrity of an electrical, electronic, or programmable electronic (E/E/PE) system intended to perform safety functions on industrial machinery.

The SIL classification is divided into four integrity levels, from lowest to highest:

SIL 1 – low residual risk, suitable for most standard industrial machines
SIL 2 – medium risk, required for systems with the potential for serious injury
SIL 3 – high risk, necessary for systems with possible multiple fatal consequences
SIL 4 – extreme risk, applicable to sectors such as nuclear and process chemistry

Determining the SIL level requires a quantitative risk analysis based on the probability of dangerous failure on demand (PFD) or the frequency of dangerous failure (PFH). The IEC 62061 standard applies specifically to safety-related control systems (SRECS) of industrial machinery and is harmonized with Regulation (EU) 2023/1230.

PL Certification – Performance Level (EN ISO 13849-1)

The Performance Level (PL) is defined by the EN ISO 13849-1 standard and represents the reliability level of a part of a safety-related control system (SRP/CS). Unlike SIL, PL is applicable to all types of technology (mechanical, hydraulic, pneumatic, electrical, and electronic).

The PL scale includes five levels in increasing order of reliability:

PL a – minimum level, for minor risks
PL b – for risks with a moderate probability of occurrence
PL c – for medium-severity risks, typical of machine tools and processing plants
PL d – for high risks with the possibility of serious or irreversible injury
PL e – maximum level, for risks of death or permanent disability

The determination of the PLr (Required Performance Level) is based on risk assessment according to the parameters S (severity of injury), F (frequency of exposure), and P (possibility of avoiding the hazard) defined by the standard. Achieving the PLr also depends on the category of the system structure (Categories B, 1, 2, 3, 4) and the reliability parameters of the components (MTTFd, DCavg, CCF).

Relationship between SIL and PL in industrial machinery design

The IEC 62061 and EN ISO 13849-1 standards are both harmonized with the Machinery Directive and the new Regulation (EU) 2023/1230. Although they use different methodologies, there is a recognized correspondence between the two classification systems: PL c corresponds approximately to SIL 1, PL d to SIL 2, and PL e to SIL 3.

The choice between the two standards depends on the technology used in the safety system: EN ISO 13849-1 is preferred for traditional systems with mechanical, hydraulic, and pneumatic components, while IEC 62061 is more suitable for programmable systems (safety PLCs, safe fieldbus systems). In both cases, the demonstration of the level achieved must be documented in the machine’s technical file.

Partly completed machinery: definition and obligations

The Regulation introduces and confirms the concept of partly completed machinery, which refers to incomplete components intended to be integrated into other machinery. Partly completed machinery cannot be used independently.

In this case, the manufacturer must:

prepare the technical documentation
provide the assembly instructions
draw up the declaration of incorporation

Why compliance is important

Complying with machinery regulations, including SIL and PL certifications where applicable, means:

avoiding sanctions and marketing bans
ensuring operator safety
increasing product reliability
facilitating access to the European market
demonstrating the achievement of the SIL and PL levels required by the risk assessment

CE marking consultancy for industrial machinery

If you need support for:

CE marking for machinery
drafting the technical file
risk analysis and determination of PLr and SIL levels
verification of compliance according to EN ISO 13849-1 and IEC 62061
adaptation to EU Regulation 2023/1230

Dr. Nunzio Braia is the technical point of reference for our organization: over thirty years of field experience, both nationally and internationally, a qualification recognized by TUV SUD (SIL) and TUV Intercert (Machinery), and a consolidated collaboration with Accredia – Italian Accreditation Body as a Technical Expert in the toys, PPE, gas, and machinery sectors.

Below is the list of harmonized standards in Italian to date, to be verified during the preparation of the Risk Analysis.

Total references listed: 837 unique harmonized standards.

The sections are organized by technical macro-families to facilitate consultation.

General standards (15)

EN 1127-1 — Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology
EN 1127-2 — Explosive atmospheres – Explosion prevention and protection – Part 2: Basic concepts and methodology for underground mines
EN 1672-2 — Food processing machinery – Basic concepts – Part 2: Hygiene requirements
EN ISO 12100 — Safety of machinery – General principles for design – risk assessment and risk reduction (ISO 12100)
EN ISO 12100-1 — Safety of machinery – Basic concepts, general principles for design – Part 1: Basic terminology, methodology (ISO 12100-1)
EN ISO 12100-2 — Safety of machinery – Basic concepts, general principles for design – Part 2: Technical principles (ISO 12100-2)
EN ISO 13849-1 — Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design (ISO 13849-1)
EN ISO 13850 — Safety of machinery – Emergency stop function – Principles for design (ISO 13850)
EN ISO 13851 — Safety of machinery – Two-hand control devices – Principles for design and selection (ISO 13851)
EN ISO 13856-1 — Safety of machinery – Pressure-sensitive protective devices – Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1)
EN ISO 13856-2 — Safety of machinery – Pressure-sensitive protective devices – Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2)
EN ISO 13856-3 — Safety of machinery – Pressure-sensitive protective devices – Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3)
EN ISO 14119 — Safety of machinery – Interlocking devices associated with guards – Principles for design and selection (ISO 14119)
EN ISO 18497 — Agricultural machines and tractors – Safety of highly automated agricultural machines – Principles for design (ISO 18497)
EN ISO 25119-1 — Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 1: General principles for design and development (ISO 25119-1)

Ergonomics, human-machine interface (20)

EN 1005-1 — Safety of machinery – Human physical performance – Part 1: Terms and definitions
EN 1005-2 — Safety of machinery – Human physical performance – Part 2: Manual handling of machinery and component parts of machinery
EN 1005-3 — Safety of machinery – Human physical performance – Part 3: Recommended force limits for machinery operation
EN 1005-4 — Safety of machinery – Human physical performance – Part 4: Evaluation of working postures and movements in relation to machinery
EN 547-1 — Safety of machinery – Human body measurements – Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
EN 547-2 — Safety of machinery – Human body measurements – Part 2: Principles for determining the dimensions required for access openings
EN 547-3 — Safety of machinery – Human body measurements – Part 3: Anthropometric data
EN 614-1 — Safety of machinery – Ergonomic design principles – Part 1: Terminology and general principles
EN 614-2 — Safety of machinery – Ergonomic design principles – Part 2: Interactions between the design of machinery and work tasks
EN 842 — Safety of machinery – Visual danger signals – General requirements, design and testing
EN 894-1 — Safety of machinery – Ergonomic requirements for the design of displays and control actuators – Part 1: General principles
EN 894-2 — Safety of machinery – Ergonomic requirements for the design of displays and control actuators – Part 2: Displays
EN 894-3 — Safety of machinery – Ergonomic requirements for the design of displays and control actuators – Part 3: Control actuators
EN 894-4 — Safety of machinery – Ergonomic requirements for the design of displays and control actuators – Part 4: Location and arrangement
EN ISO 13732-1 — Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces – Part 1: Hot surfaces (ISO 13732-1)
EN ISO 13732-3 — Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces – Part 3: Cold surfaces (ISO 13732-3)
EN ISO 13854 — Safety of machinery – Minimum gaps to avoid crushing of parts of the human body (ISO 13854)
EN ISO 14738 — Safety of machinery – Anthropometric requirements for the design of workstations at machinery (ISO 14738, including Cor 1 and Cor 2)
EN ISO 15536-1 — Ergonomics – Computer manikins and body templates – Part 1: General requirements (ISO 15536-1)
EN ISO 7731 — Ergonomics – Danger signals for public and work areas – Auditory danger signals (ISO 7731)

Controls, guards and safety functions (9)

EN 12965 — Tractors and machinery for agriculture and forestry – Power take-off (PTO) drive shafts and their guards – Safety
EN 15811 — Agricultural machinery – Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923 modified)
EN 60947-5-5 — Low-voltage switchgear and controlgear – Part 5-5: Control circuit devices and switching elements – Electrical emergency stop device with mechanical latching function
EN ISO 13849-2 — Safety of machinery – Safety-related parts of control systems – Part 2: Validation (ISO 13849-2)
EN ISO 13855 — Safety of machinery – Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855)
EN ISO 13857 — Safety of machinery – Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857)
EN ISO 14120 — Safety of machinery – Guards – General requirements for the design and construction of fixed and movable guards (ISO 14120)
EN ISO 3457 — Earth-moving machinery – Guards – Definitions and requirements (ISO 3457)
EN ISO 5674 — Tractors and machinery for agriculture and forestry – Guards for power take-off (PTO) drive-shafts – Strength and wear tests and acceptance criteria (ISO 5674, corrected version 2005-07-01)

Physical agents, emissions and specific risks (97)

EN 1032 — Mechanical vibration – Testing of mobile machinery in order to determine the vibration emission value
EN 1093-1 — Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 1: Selection of test methods
EN 1093-11 — Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 11: Decontamination index
EN 1093-2 — Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
EN 1093-3 — Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 3: Test bench method for the measurement of the emission rate of a given pollutant
EN 1093-4 — Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 4: Capture efficiency of an exhaust system – Tracer method
EN 1093-6 — Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 6: Separation efficiency by mass, unducted outlet
EN 1093-7 — Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 7: Separation efficiency by mass, ducted outlet
EN 1093-8 — Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 8: Pollutant concentration parameter, test bench method
EN 1093-9 — Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 9: Pollutant concentration parameter, room method
EN 12053 — Safety of industrial trucks – Test methods for measuring noise emissions
EN 12198-1 — Safety of machinery – Assessment and reduction of risks arising from radiation emitted by machinery – Part 1: General principles
EN 12198-2 — Safety of machinery – Assessment and reduction of risks arising from radiation emitted by machinery – Part 2: Radiation emission measurement procedure
EN 12198-3 — Safety of machinery – Assessment and reduction of risks arising from radiation emitted by machinery – Part 3: Reduction of radiation by attenuation or screening
EN 12254 — Screens for laser working places – Safety requirements and testing
EN 12545 — Footwear, leather and imitation leather goods manufacturing machines – Noise test code – Common requirements
EN 12549 — Acoustics – Noise test code for fastener driving tools – Engineering method
EN 1265 — Safety of machinery – Noise test code for foundry machines and equipment
EN 12786 — Safety of machinery – Requirements for the drafting of the vibration clauses of safety standards
EN 1299 — Mechanical vibration and shock – Vibration isolation of machines – Information for the application of source isolation
EN 13023 — Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment – Accuracy grades 2 and 3
EN 13059 — Safety of industrial trucks – Test methods for measuring vibration
EN 13490 — Mechanical vibration – Industrial trucks – Laboratory evaluation and specification of operator seat vibration
EN 14462 — Surface treatment equipment – Noise test code for surface treatment equipment including its ancillary handling equipment – Accuracy grades 2 and 3
EN 1501-4 — Refuse collection vehicles – General requirements and safety requirements – Part 4: Noise test code for refuse collection vehicles
EN 1547 — Industrial thermoprocessing equipment – Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
EN 15695-1 — Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances – Part 1: Cab classification, requirements and test procedures
EN 15695-2 — Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances – Part 2: Filters, requirements and test procedures
EN 1710 — Equipment and components intended for use in potentially explosive atmospheres in underground mines
EN 17348 — Requirements for design and testing of vacuum cleaners for use in potentially explosive atmospheres
EN 1915-3 — Aircraft ground support equipment – General requirements – Part 3: Vibration measurement methods and reduction
EN 1915-4 — Aircraft ground support equipment – General requirements – Part 4: Noise measurement methods and reduction
EN 30326-1 — Mechanical vibration – Laboratory method for evaluating vehicle seat vibration – Part 1: Basic requirements (ISO 10326-1)
EN 415-9 — Safety of packaging machines – Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
EN 61310-1 — Safety of machinery – Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals
EN ISO 10326-1 — Mechanical vibration – Laboratory method for evaluating vehicle seat vibration – Part 1: Basic requirements (ISO 10326-1, Corrected version 2017-02)
EN ISO 11145 — Optics and photonics – Lasers and laser-related equipment – Vocabulary and symbols (ISO 11145)
EN ISO 11201 — Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201)
EN ISO 11202 — Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202)
EN ISO 11203 — Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203)
EN ISO 11204 — Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204)
EN ISO 11205 — Acoustics – Noise emitted by machinery and equipment – Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205)
EN ISO 11252 — Lasers and laser-related equipment – Laser device – Minimum requirements for documentation (ISO 11252)
EN ISO 11546-1 — Acoustics – Determination of sound insulation performances of enclosures – Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1)
EN ISO 11546-2 — Acoustics – Determination of sound insulation performances of enclosures – Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2)
EN ISO 11553-1 — Safety of machinery – Laser processing machines – Part 1: Laser safety requirements (ISO 11553-1)
EN ISO 11553-2 — Safety of machinery – Laser processing machines – Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2)
EN ISO 11553-3 — Safety of machinery – Laser processing machines – Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3)
EN ISO 11554 — Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power, energy and temporal characteristics (ISO 11554)
EN ISO 11688-1 — Acoustics – Recommended practice for the design of low-noise machinery and equipment – Part 1: Planning (ISO/TR 11688-1)
EN ISO 11691 — Acoustics – Measurement of insertion loss of ducted silencers without flow – Laboratory survey method (ISO 11691)
EN ISO 11957 — Acoustics – Determination of sound insulation performance of cabins – Laboratory and in situ measurements (ISO 11957)
EN ISO 13753 — Mechanical vibration and shock – Hand-arm vibration – Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753)
EN ISO 14123-1 — Safety of machinery – Reduction of risks to health resulting from hazardous substances emitted by machinery – Part 1: Principles and specifications for machinery manufacturers (ISO 14123-1)
EN ISO 14123-2 — Safety of machinery – Reduction of risks to health resulting from hazardous substances emitted by machinery – Part 2: Methodology leading to verification procedures (ISO 14123-2)
EN ISO 15744 — Hand-held non-electric power tools – Noise measurement code – Engineering method (grade 2) (ISO 15744)
EN ISO 19353 — Safety of machinery – Fire prevention and fire protection (ISO 19353)
EN ISO 20361 — Liquid pumps and pumps units – Noise test code – Grades 2 and 3 of accuracy (ISO 20361)
EN ISO 20643 — Mechanical vibration – Hand-held and hand-guided machinery – Principles for evaluation of vibration emission (ISO 20643)
EN ISO 2151 — Acoustics – Noise test code for compressors and vacuum pumps – Engineering method (Grade 2) (ISO 2151)
EN ISO 22867 — Forestry and gardening machinery – Vibration test code for portable hand-held machines with internal combustion engine – Vibration at the handles (ISO 22867)
EN ISO 22868 — Forestry and gardening machinery – Noise test code for portable hand-held machines with internal combustion engine – Engineering method (Grade 2 accuracy) (ISO 22868)
EN ISO 28927-1 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 1: Angle and vertical grinders (ISO 28927-1)
EN ISO 28927-10 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 10: Percussive drills, hammers and breakers (ISO 28927-10)
EN ISO 28927-11 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 11: Stone hammers (ISO 28927-11)
EN ISO 28927-12 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 12: Die grinders (ISO 28927-12)
EN ISO 28927-13 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 13: Fastener driving tools (ISO 28927-13)
EN ISO 28927-2 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2)
EN ISO 28927-3 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3)
EN ISO 28927-4 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4)
EN ISO 28927-5 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 5: Drills and impact drills (ISO 28927-5)
EN ISO 28927-6 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 6: Rammers (ISO 28927-6)
EN ISO 28927-7 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 7: Nibblers and shears (ISO 28927-7)
EN ISO 28927-8 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8)
EN ISO 28927-9 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 9: Scaling hammers and needle scalers (ISO 28927-9)
EN ISO 3741 — Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for reverberation test rooms (ISO 3741)
EN ISO 3743-1 — Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for small movable sources in reverberant fields – Part 1: Comparison method for a hard-walled test room (ISO 3743-1)
EN ISO 3743-2 — Acoustics – Determination of sound power levels of noise sources using sound pressure – Engineering methods for small, movable sources in reverberant fields – Part 2: Methods for special reverberation test rooms (ISO 3743-2)
EN ISO 3744 — Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for an essentially free field over a reflecting plane (ISO 3744)
EN ISO 3745 — Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745)
EN ISO 3746 — Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746)
EN ISO 3747 — Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering/survey methods for use in situ in a reverberant environment (ISO 3747)
EN ISO 4871 — Acoustics – Declaration and verification of noise emission values of machinery and equipment (ISO 4871)
EN ISO 5136 — Acoustics – Determination of sound power radiated into a duct by fans and other air-moving devices – In-duct method (ISO 5136)
EN ISO 7096 — Earth-moving machinery – Laboratory evaluation of operator seat vibration (ISO 7096)
EN ISO 7235 — Acoustics – Laboratory measurement procedures for ducted silencers and air-terminal units – Insertion loss, flow noise and total pressure loss (ISO 7235)
EN ISO 8528-10 — Reciprocating internal combustion engine driven alternating current generating sets – Part 10: Measurement of airborne noise (ISO 8528-10)
EN ISO 9614-1 — Acoustics – Determination of sound power levels of noise sources using sound intensity – Part 1: Measurement at discrete points (ISO 9614-1)
EN ISO 9614-3 — Acoustics – Determination of sound power levels of noise sources using sound intensity – Part 3: Precision method for measurement by scanning (ISO 9614-3)
EN ISO 9902-1 — Textile machinery – Noise test code – Part 1: Common requirements (ISO 9902-1)
EN ISO 9902-2 — Textile machinery – Noise test code – Part 2: Spinning preparatory and spinning machinery (ISO 9902-2)
EN ISO 9902-3 — Textile machinery – Noise test code – Part 3: Nonwoven machinery (ISO 9902-3)
EN ISO 9902-4 — Textile machinery – Noise test code – Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4)
EN ISO 9902-5 — Textile machinery – Noise test code – Part 5: Weaving and knitting preparatory machinery (ISO 9902-5)
EN ISO 9902-6 — Textile machinery – Noise test code – Part 6: Fabric manufacturing machinery (ISO 9902-6)
EN ISO 9902-7 — Textile machinery – Noise test code – Part 7: Dyeing and finishing machinery (ISO 9902-7)
EN ISO/IEC 80079-38 — Explosive atmospheres – Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38)

Energy, fluid power and technical systems (18)

EN 12312-19 — Aircraft ground support equipment – Specific requirements – Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions
EN 12622 — Safety of machine tools – Hydraulic press brakes
EN 13001-3-6 — Cranes – General design – Part 3-6: Limit states and proof of competence – Hydraulic cylinders
EN 14673 — Safety of machinery – Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
EN 1804-1 — Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 1: Support units and general requirements
EN 1804-2 — Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 2: Power set legs and rams
EN 1804-3 — Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 3: Hydraulic and electro-hydraulic control systems
EN 474-5 — Earth-moving machinery – Safety – Part 5: Requirements for hydraulic excavators
EN 50059 — Hand-held electrostatic application equipment for non-ignitable liquid coating materials – Safety requirements
EN 50176 — Automatic electrostatic application systems for ignitable liquid coating materials – Safety requirements
EN 50223 — Stationary electrostatic application equipment for ignitable flock material – Safety requirements
EN 50348 — Stationary electrostatic application equipment for non-ignitable liquid coating material – Safety requirements
EN 741 — Continuous handling equipment and systems – Safety requirements for systems and their components for pneumatic handling of bulk materials
EN 81-3 — Safety rules for the construction and installation of lifts – Part 3: Electric and hydraulic service lifts
EN ISO 16092-3 — Machine tools safety – Presses – Part 3: Safety requirements for hydraulic presses (ISO 16092-3)
EN ISO 16092-4 — Machine tools safety – Presses – Part 4: Safety requirements for pneumatic presses (ISO 16092-4)
EN ISO 4413 — Hydraulic fluid power – General rules and safety requirements for systems and their components (ISO 4413)
EN ISO 4414 — Pneumatic fluid power – General rules and safety requirements for systems and their components (ISO 4414)

Lifts, platforms and hoists (26)

EN 115-1 — Safety of escalators and moving walks – Part 1: Construction and installation
EN 12016 — Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Immunity
EN 12158-1 — Builders’ hoists for goods – Part 1: Hoists with accessible platforms
EN 12312-8 — Aircraft ground support equipment – Specific requirements – Part 8: Maintenance or service stairs and platforms
EN 12385-5 — Steel wire ropes – Safety – Part 5: Stranded ropes for lifts
EN 13015 — Maintenance for lifts and escalators – Rules for maintenance instructions
EN 13367 — Ceramic machines – Safety – Transfer platforms and cars
EN 1493 — Vehicle lifts
EN 1494 — Mobile or movable jacks and associated lifting equipment
EN 1495 — Lifting platforms – Mast climbing work platforms
EN 15095 — Power-operated mobile racking and shelving, carousels and storage lifts – Safety requirements
EN 1570-1 — Safety requirements for lifting tables – Part 1: Lifting tables serving up to two fixed landing
EN 1570-2 — Safety requirements for lifting tables – Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0.15 m/s
EN 16719 — Transport platforms
EN 16952 — Agricultural machinery – Rough-terrain Work Platforms for Orchard’s operations (WPO) – Safety
EN 1756-1 — Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 1: Tail lifts for goods
EN 1756-2 — Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 2: Tail lifts for passengers
EN 1808 — Safety requirements for suspended access equipment – Design calculations, stability criteria, construction – Examinations and tests
EN 280-1 — Mobile elevating work platforms – Part 1: Design calculations – Stability criteria – Construction – Safety – Examinations and tests
EN 280-2 — Mobile elevating work platforms – Part 2: Additional safety requirements for load lifting appliances on the extending lifting structure and work platform
EN 81-31 — Safety rules for the construction and installation of lifts – Part 31: Accessible goods only lifts
EN 81-40 — Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility
EN 81-41 — Safety rules for the construction and installation of lifts – Part 41: Vertical lifting platforms for persons with impaired mobility
EN 81-43 — Safety rules for the construction and installation of lifts – Part 43: Lifts for cranes
EN 81-44 — Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 44: Lifting appliances in wind turbines
EN ISO 14122-2 — Safety of machinery – Permanent means of access – Part 2: Working platforms and walkways (ISO 14122-2)

Lifting equipment, cranes, and accessories (28)

EN 12077-2 — Crane safety – Requirements for health and safety – Part 2: Limiting and indicating devices
EN 12644-1 — Cranes – Information for use and testing – Part 1: Instructions
EN 12644-2 — Cranes – Information for use and testing – Part 2: Marking
EN 12999 — Cranes – Loader cranes
EN 13000 — Cranes – Mobile cranes
EN 13001-1 — Cranes – General design – Part 1: General principles and requirements
EN 13001-2 — Cranes – General design – Part 2: Load actions
EN 13001-3-1 — Cranes – General design – Part 3-1: Limit states and proof of competence of steel structure
EN 13001-3-2 — Cranes – General design – Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
EN 13001-3-3 — Cranes – General design – Part 3-3: Limit states and proof of competence of wheel/rail contacts
EN 13001-3-5 — Cranes – General design – Part 3-5: Limit states and proof of competence of forged and cast hooks
EN 13135 — Cranes – Safety – Design – Requirements for equipment
EN 13155 — Cranes – Safety – Non-fixed load lifting attachments
EN 13157 — Cranes – Safety – Hand powered cranes
EN 13557 — Cranes – Control devices and control stations
EN 13586 — Cranes – Access
EN 13852-1 — Cranes – Offshore cranes – Part 1: General-purpose offshore cranes
EN 13852-3 — Cranes – Offshore cranes – Part 3: Light offshore cranes
EN 14238 — Cranes – Manually controlled load manipulating devices
EN 14439 — Cranes – Safety – Tower cranes
EN 14492-1 — Cranes – Power driven winches and hoists – Part 1: Power driven winches
EN 14492-2 — Cranes – Power driven winches and hoists – Part 2: Power driven hoists
EN 14502-2 — Cranes – Equipment for the lifting of persons – Part 2: Elevating control stations
EN 14985 — Cranes – Slewing jib cranes
EN 15011 — Cranes – Bridge and gantry cranes
EN 15056 — Cranes – Requirements for container handling spreaders
EN 16851 — Cranes – Light crane systems
EN 17076 — Tower cranes – Anti-collision systems – Safety requirements

Industrial and rough-terrain trucks (16)

EN 1175 — Safety of industrial trucks – Electrical/electronic requirements
EN 1459-1 — Rough-terrain trucks – Safety requirements and verification – Part 1: Variable-reach trucks
EN 1459-2 — Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks
EN 1459-4 — Rough-terrain trucks – Safety requirements and verification – Part 4: Additional requirements for variable-reach trucks handling freely suspended loads
EN 1459-5 — Rough-terrain trucks – Safety requirements and verification – Part 5: Attachment interface
EN 15000 — Safety of industrial trucks – Self propelled variable reach trucks – Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters
EN 1526 — Safety of industrial trucks – Additional requirements for automated functions on trucks
EN 16203 — Safety of Industrial Trucks – Dynamic tests for verification of lateral stability – Counterbalanced Trucks
EN 16307-1 — Industrial trucks – Safety requirements and verification – Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
EN 16307-5 — Industrial trucks – Safety requirements and verification – Part 5: Supplementary requirements for pedestrian-propelled trucks
EN 16307-6 — Industrial trucks – Safety requirements and verification – Part 6: Supplementary requirements for burden and personnel carriers
EN ISO 18063-2 — Rough-terrain trucks – Visibility test methods and their verification – Part 2: Slewing rough-terrain variable-reach trucks (ISO 18063-2)
EN ISO 3691-1 — Industrial trucks – Safety requirements and verification – Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1, including Cor 1)
EN ISO 3691-4 — Industrial trucks – Safety requirements and verification – Part 4: Driverless industrial trucks and their systems (ISO 3691-4)
EN ISO 3691-5 — Industrial trucks – Safety requirements and verification – Part 5: Pedestrian-propelled trucks (ISO 3691-5)
EN ISO 3691-6 — Industrial trucks – Safety requirements and verification – Part 6: Burden and personnel carriers (ISO 3691-6)

Packaging machinery (9)

EN 1034-26 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 26: Roll packaging machines
EN 415-1 — Safety of packaging machines – Part 1: Terminology and classification of packaging machines and associated equipment
EN 415-10 — Safety of packaging machines – Part 10: General Requirements
EN 415-2 — Safety of packaging machines – Part 2: Packaging machines for pre-formed rigid containers
EN 415-3 — Safety of packaging machines – Part 3: Form, fill and seal machines; fill and seal machines
EN 415-5 — Safety of packaging machines – Part 5: Wrapping machines
EN 415-6 — Safety of packaging machines – Part 6: Pallet wrapping machines
EN 415-7 — Safety of packaging machines – Part 7: Group and secondary packaging machines
EN 415-8 — Safety of packaging machines – Part 8: Strapping machines

Food industry machinery (45)

EN 12041 — Food processing machinery – Moulders – Safety and hygiene requirements
EN 12042 — Food processing machinery – Automatic dough dividers – Safety and hygiene requirements
EN 12043 — Food processing machinery – Intermediate provers – Safety and hygiene requirements
EN 12267 — Food processing machinery – Circular saw machines – Safety and hygiene requirements
EN 12268 — Food processing machinery – Band saw machines – Safety and hygiene requirements
EN 12331 — Food processing machinery – Mincing machines – Safety and hygiene requirements
EN 12355 — Food processing machinery – Derinding-, skinning- and membrane removal machines – Safety and hygiene requirements
EN 12463 — Food processing machinery – Filling machines and auxiliary machines – Safety and hygiene requirements
EN 12505 — Food processing machinery – Centrifugal machines for processing edible oils and fats – Safety and hygiene requirements
EN 12852 — Food processing machinery – Food processors and blenders – Safety and hygiene requirements
EN 12853 — Food processing machinery – Hand-held blenders and whisks – Safety and hygiene requirements
EN 12854 — Food processing machinery – Beam mixers – Safety and hygiene requirements
EN 12855 — Food processing machinery – Rotating bowl cutters – Safety and hygiene requirements
EN 12984 — Food processing machinery – Portable and/or hand-guided machines and appliances with mechanically driven cutting tools – Safety and hygiene requirements
EN 13208 — Food processing machinery – Vegetable peelers – Safety and hygiene requirements
EN 13288 — Food processing machinery – Bowl lifting and tilting machines – Safety and hygiene requirements
EN 13389 — Food processing machinery – Mixers with horizontal shafts – Safety and hygiene requirements
EN 13390 — Food processing machinery – Pie and tart machines – Safety and hygiene requirements
EN 13534 — Food processing machinery – Curing injection machines – Safety and hygiene requirements
EN 13570 — Food processing machinery – Mixing machines – Safety and hygiene requirements
EN 13591 — Food processing machinery – Fixed deck oven loaders – Safety and hygiene requirements
EN 13621 — Food processing machinery – Salad dryers – Safety and hygiene requirements
EN 13732 — Food processing machinery – Bulk milk coolers on farms – Requirements for performance, safety and hygiene
EN 13870 — Food processing machinery – Portion cutting machines – Safety and hygiene requirements
EN 13871 — Food processing machinery – Cubes cutting machinery – Safety and hygiene requirements
EN 13885 — Food processing machinery – Clipping machines – Safety and hygiene requirements
EN 13886 — Food processing machinery – Cooking kettles equipped with powered stirrer and/or mixer – Safety and hygiene requirements
EN 13954 — Food processing machinery – Bread slicers – Safety and hygiene requirements
EN 14655 — Food processing machinery – Baguette slicers – Safety and hygiene requirements
EN 14957 — Food processing machinery – Dishwashing machines with conveyor – Safety and hygiene requirements
EN 14958 — Food processing machinery – Machinery for grinding and processing flour and semolina – Safety and hygiene requirements
EN 15166 — Food processing machinery – Automatic back splitting machines of butchery carcasses – Safety and hygiene requirements
EN 15180 — Food processing machinery – Food depositors – Safety and hygiene requirements
EN 15774 — Food processing machinery – Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) – Safety and hygiene requirements
EN 15861 — Food processing machinery – Smokehouses – Safety and hygiene requirements
EN 1673 — Food processing machinery – Rotary rack ovens – Safety and hygiene requirements
EN 1674 — Food processing machinery – Dough sheeters – Safety and hygiene requirements
EN 16743 — Food processing machinery – Automatic industrial slicing machines – Safety and hygiene requirements
EN 1678 — Food processing machinery – Vegetable cutting machines – Safety and hygiene requirements
EN 17677 — Food processing machinery – Craft bakery and pastry depositors – Safety and hygiene requirements
EN 1974 — Food processing machinery – Slicing machines – Safety and hygiene requirements
EN 453 — Food processing machinery – Dough mixers – Safety and hygiene requirements
EN 454 — Food processing machinery – Planetary mixers – Safety and hygiene requirements
EN 60335-2-89 — Household and similar electrical appliances – Safety – Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
EN IEC 60335-2-89 — Household and similar electrical appliances – Safety – Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor EN IEC 60335-2-89

Agricultural, forestry, and viticultural machinery (58)

EN 12525 — Agricultural machinery – Front loaders – Safety
EN 12733 — Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety
EN 13448 — Agricultural and forestry machinery – Inter-row mowing units – Safety
EN 13525 — Forestry machinery – Wood chippers – Safety
EN 1374 — Agricultural machinery – Silos stationary unloaders for round silos – Safety
EN 14930 — Agricultural and forestry machinery and gardening equipment – Pedestrian controlled and hand-held machines – Determination of accessibility of hot surfaces
EN 16246 — Agricultural machinery – Backhoes – Safety
EN 16517 — Agricultural and forestry machinery – Mobile yarders for timber logging – Safety
EN 17067 — Forestry machinery – Safety requirements on radio remote controls
EN 17744 — Agricultural and forestry machinery – Environmental requirements for dusters
EN 17923 — Equipment for vine cultivation and wine making – Safety – Must and grape harvest pumps
EN 1853 — Agricultural machinery – Trailers – Safety
EN 609-1 — Agricultural and forestry machinery – Safety of log splitters – Part 1: Wedge splitters
EN 609-2 — Agricultural and forestry machinery – Safety of log splitters – Part 2: Screw splitters
EN 690 — Agricultural machinery – Manure spreaders – Safety
EN 703 — Agricultural machinery – Safety – Silage loading, mixing and/or chopping and distributing machines
EN 706 — Agricultural machinery – Vine shoot tipping machines – Safety
EN 707 — Agricultural machinery – Slurry tankers – Safety
EN 709 — Agricultural and forestry machinery – Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) – Safety
EN 908 — Agricultural and forestry machinery – Reel machines for irrigation – Safety
EN 909 — Agricultural and forestry machinery – Centre pivot and moving lateral types irrigation machines – Safety
EN IEC 62841-4-3 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers EN IEC 62841-4-3
EN ISO 11680-1 — Machinery for forestry – Safety requirements and testing for pole-mounted powered pruners – Part 1: Machines fitted with an integral combustion engine (ISO 11680-1)
EN ISO 11680-2 — Machinery for forestry – Safety requirements and testing for pole-mounted powered pruners – Part 2: Machines for use with backpack power source (ISO 11680-2)
EN ISO 11681-1 — Machinery for forestry – Portable chain-saw safety requirements and testing – Part 1: Chain-saws for forest service (ISO 11681-1)
EN ISO 11681-2 — Machinery for forestry – Portable chain-saw safety requirements and testing – Part 2: Chain-saws for tree service (ISO 11681-2)
EN ISO 11806-1 — Agricultural and forestry machinery – Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers – Part 1: Machines fitted with an integral combustion engine (ISO 11806-1)
EN ISO 11806-2 — Agricultural and forestry machinery – Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers – Part 2: Machines for use with backpack power unit (ISO 11806-2)
EN ISO 11850 — Machinery for forestry – General safety requirements (ISO 11850)
EN ISO 14982 — Agricultural and forestry machinery – Electromagnetic compatibility – Test methods and acceptance criteria (ISO 14982)
EN ISO 16119-1 — Agricultural and forestry machinery – Environmental requirements for sprayers – Part 1: General (ISO 16119-1)
EN ISO 16119-2 — Agricultural and forestry machinery – Environmental requirements for sprayers – Part 2: Horizontal boom sprayers (ISO 16119-2, Corrected version 2017-03)
EN ISO 16119-3 — Agricultural and forestry machinery – Environmental requirements for sprayers – Part 3: Sprayers for bush and tree crops (ISO 16119-3)
EN ISO 16119-4 — Agricultural and forestry machinery – Environmental requirements for sprayers – Part 4: Fixed and semi-mobile sprayers (ISO 16119-4)
EN ISO 16230-1 — Agricultural machines and tractors – Safety of higher voltage electrical and electronic components and systems – Part 1: General requirements (ISO 16230-1)
EN ISO 16231-1 — Self-propelled agricultural machinery – Assessment of stability – Part 1: Principles (ISO 16231-1)
EN ISO 16231-2 — Self-propelled agricultural machinery – Assessment of stability – Part 2: Determination of static stability and test procedures (ISO 16231-2)
EN ISO 19472-2 — Machinery for forestry – Winches – Part 2: Traction aid winches (ISO 19472-2)
EN ISO 19932-1 — Equipment for crop protection – Knapsack sprayers – Part 1: Safety and environmental requirements (ISO 19932-1)
EN ISO 19932-2 — Equipment for crop protection – Knapsack sprayers – Part 2: Test methods (ISO 19932-2)
EN ISO 25119-2 — Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 2: Concept phase (ISO 25119-2)
EN ISO 25119-3 — Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 3: Series development, hardware and software (ISO 25119-3)
EN ISO 25119-4 — Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 4: Production, operation, modification and supporting processes (ISO 25119-4)
EN ISO 28139 — Agricultural and forestry machinery – Knapsack combustion-engine-driven mistblowers – Safety requirements (ISO 28139)
EN ISO 4254-1 — Agricultural machinery – Safety – Part 1: General requirements (ISO 4254-1)
EN ISO 4254-10 — Agricultural machinery – Safety – Part 10: Rotary tedders and rakes (ISO 4254-10)
EN ISO 4254-11 — Agricultural machinery – Safety – Part 11: Pick-up balers (ISO 4254-11)
EN ISO 4254-12 — Agricultural machinery – Safety – Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12)
EN ISO 4254-14 — Agricultural machinery – Safety – Part 14: Bale wrappers (ISO 4254-14)
EN ISO 4254-17 — Agricultural machinery – Safety – Part 17: Root crop harvesters (ISO 4254-17)
EN ISO 4254-5 — Agricultural machinery – Safety – Part 5: Power-driven soil-working machines (ISO 4254-5)
EN ISO 4254-6 — Agricultural machinery – Safety – Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6)
EN ISO 4254-7 — Agricultural machinery – Safety – Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters (ISO 4254-7)
EN ISO 4254-8 — Agricultural machinery – Safety – Part 8: Solid fertilizer distributors (ISO 4254-8)
EN ISO 4254-9 — Agricultural machinery – Safety – Part 9: Seed drills (ISO 4254-9)
EN ISO 5395-1 — Garden equipment – Safety requirements for combustion-engine-powered lawnmowers – Part 1: Terminology and common tests (ISO 5395-1)
EN ISO 5395-2 — Garden equipment – Safety requirements for combustion-engine-powered lawnmowers – Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2)
EN ISO 5395-3 — Garden equipment – Safety requirements for combustion-engine-powered lawnmowers – Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3)

Earth-moving and road construction machinery (28)

EN 13531 — Earth-moving machinery – Tip-over protection structure (TOPS) for compact excavators – Laboratory tests and performance requirements (ISO 12117 modified)
EN 474-1 — Earth-moving machinery – Safety – Part 1: General requirements
EN 474-10 — Earth-moving machinery – Safety – Part 10: Requirements for trenchers
EN 474-11 — Earth-moving machinery – Safety – Part 11: Requirements for earth- and landfill compactors
EN 474-12 — Earth-moving machinery – Safety – Part 12: Requirements for cable excavators
EN 474-13 — Earth-moving machinery – Safety – Part 13: Requirements for rollers
EN 474-2 — Earth-moving machinery – Safety – Part 2: Requirements for tractor-dozers
EN 474-3 — Earth-moving machinery – Safety – Part 3: Requirements for loaders
EN 474-4 — Earth-moving machinery – Safety – Part 4: Requirements for backhoe loaders
EN 474-6 — Earth-moving machinery – Safety – Part 6: Requirements for dumpers
EN 474-7 — Earth-moving machinery – Safety – Part 7: Requirements for scrapers
EN 474-8 — Earth-moving machinery – Safety – Part 8: Requirements for graders
EN 474-9 — Earth-moving machinery – Safety – Part 9: Requirements for pipelayers
EN 500-1 — Mobile road construction machinery – Safety – Part 1: Common requirements
EN 500-2 — Mobile road construction machinery – Safety – Part 2: Specific requirements for road-milling machines
EN 500-3 — Mobile road construction machinery – Safety – Part 3: Specific requirements for soil-stabilising machines and recycling machines
EN 500-6 — Mobile road construction machinery – Safety – Part 6: Specific requirements for paver-finishers
EN 536 — Road construction machines – Mixing plants for road construction materials – Safety requirements
EN ISO 2860 — Earth-moving machinery – Minimum access dimensions (ISO 2860)
EN ISO 2867 — Earth-moving machinery – Access systems (ISO 2867)
EN ISO 3164 — Earth-moving machinery – Laboratory evaluations of protective structures – Specifications for deflection-limiting volume (ISO 3164)
EN ISO 3411 — Earth-moving machinery – Physical dimensions of operators and minimum operator space envelope (ISO 3411)
EN ISO 3449 — Earth-moving machinery – Falling-object protective structures – Laboratory tests and performance requirements (ISO 3449)
EN ISO 3450 — Earth-moving machinery – Wheeled or high-speed rubber-tracked machines – Performance requirements and test procedures for brake systems (ISO 3450)
EN ISO 3471 — Earth-moving machinery – Roll-over protective structures – Laboratory tests and performance requirements (ISO 3471)
EN ISO 5010 — Earth-moving machinery – Wheeled machines – Steering requirements (ISO 5010)
EN ISO 6682 — Earth-moving machinery – Zones of comfort and reach for controls (ISO 6682, including Amd 1)
EN ISO 6683 — Earth-moving machinery – Seat belts and seat belt anchorages – Performance requirements and tests (ISO 6683)

Woodworking machinery (41)

EN 1034-22 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 22: Wood Grinders
EN 1218-3 — Safety of woodworking machines – Tenoning machines – Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers
EN 12779 — Safety of woodworking machines – Chip and dust extraction systems with fixed installation – Safety requirements
EN 13128 — Safety of machine tools – Milling machines (including boring machines)
EN 16564 — Machines and plants for mining and tooling of natural stone – Safety – Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
EN 16770 — Safety of woodworking machines – Chip and dust extraction systems for indoor installation – Safety requirements
EN 1807-2 — Safety of woodworking machines – Band sawing machines – Part 2: Log sawing machines
EN 1870-10 — Safety of woodworking machines – Circular sawing machines – Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines
EN 1870-11 — Safety of woodworking machines – Circular sawing machines – Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
EN 1870-12 — Safety of woodworking machines – Circular sawing machines – Part 12: Pendulum cross-cut sawing machines
EN 1870-15 — Safety of woodworking machines – Circular sawing machines – Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
EN 1870-16 — Safety of woodworking machines – Circular sawing machines – Part 16: Double mitre sawing machines for V cutting
EN 1870-17 — Safety of woodworking machines – Circular sawing machines – Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
EN 1870-3 — Safety of woodworking machines – Circular sawing machines – Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
EN 1870-5 — Safety of woodworking machines – Circular sawing machines – Part 5: Circular sawbenches/up-cutting cross-cut sawing machines
EN 1870-6 — Safety of woodworking machines – Circular sawing machines – Part 6: Circular sawing machines for fire wood
EN 1870-7 — Safety of woodworking machines – Circular sawing machines – Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
EN 1870-8 — Safety of woodworking machines – Circular sawing machines – Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
EN 1870-9 — Safety of woodworking machines – Circular sawing machines – Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
EN 60745-2-20 — Hand-held motor-operated electric tools – Safety – Part 2-20: Particular requirements for band saws
EN 61029-2-5 — Safety of transportable motor-operated electric tools – Part 2-5: Particular requirements for band saws
EN 62841-2-5 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5, modified)
EN 848-2 — Safety of woodworking machines – One side moulding machines with rotating tool – Part 2: Single spindle hand fed/integrated fed routing machines
EN IEC 62841-3-5 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-5: Particular requirements for transportable band saws EN IEC 62841-3-5
EN ISO 19085-1 — Woodworking machines – Safety – Part 1: Common requirements (ISO 19085-1)
EN ISO 19085-10 — Woodworking machines – Safety – Part 10: Building site saws (contractor saws) (ISO 19085-10)
EN ISO 19085-11 — Woodworking machines – Safety – Part 11: Combined machines (ISO 19085-11)
EN ISO 19085-12 — Woodworking machines – Safety – Part 12: Tenoning/profiling machines (ISO 19085-12)
EN ISO 19085-13 — Woodworking machines – Safety – Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13)
EN ISO 19085-14 — Woodworking machines – Safety – Part 14: Four-sided moulding machines (ISO 19085-14)
EN ISO 19085-15 — Woodworking machines – Safety – Part 15: Presses (ISO 19085-15)
EN ISO 19085-16 — Woodworking machines – Safety – Part 16: Table band saws and band re-saws (ISO 19085-16)
EN ISO 19085-17 — Woodworking machines – Safety – Part 17: Edge banding machines fed by chains (ISO 19085-17)
EN ISO 19085-2 — Woodworking machines – Safety – Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2)
EN ISO 19085-3 — Woodworking machines – Safety – Part 3: Numerically controlled (NC/CNC) boring and routing machines (ISO 19085-3)
EN ISO 19085-4 — Woodworking machines – Safety – Part 4: Vertical panel circular sawing machines (ISO 19085-4)
EN ISO 19085-5 — Woodworking machines – Safety – Part 5: Dimension saws (ISO 19085-5)
EN ISO 19085-6 — Woodworking machines – Safety – Part 6: Single spindle vertical moulding machines (“toupies”) (ISO 19085-6)
EN ISO 19085-7 — Woodworking machines – Safety – Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7)
EN ISO 19085-8 — Woodworking machines – Safety – Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8)
EN ISO 19085-9 — Woodworking machines – Safety – Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9)

Paper, printing, textile, leather, and footwear (34)

EN 1010-1 — Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 1: Common requirements
EN 1010-2 — Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 2: Printing and varnishing machines including pre-press machinery
EN 1010-3 — Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 3: Cutting machines
EN 1010-4 — Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 4: Bookbinding, paper converting and finishing machines
EN 1034-1 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 1: Common requirements
EN 1034-13 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 13: Machines for de-wiring bales and units
EN 1034-14 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 14: Reel splitter
EN 1034-16 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 16: Paper and board making machines
EN 1034-17 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 17: Tissue making machines
EN 1034-2 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 2: Barking drums
EN 1034-21 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 21: Coating machines
EN 1034-27 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 27: Roll handling systems
EN 1034-3 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 3: Rereelers and winders
EN 1034-4 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 4: Pulpers and their loading facilities
EN 1034-5 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 5: Sheeters
EN 1034-6 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 6: Calender
EN 1034-7 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 7: Chests
EN 1034-8 — Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 8: Refining plants
EN 12203 — Footwear, leather and imitation leather goods manufacturing machines – Shoe and leather presses – Safety requirements
EN 12387 — Footwear, leather and imitation leather goods manufacturing machines – Modular shoe repair equipment – Safety requirements
EN 13112 — Tannery machines – Splitting and bandknife shearing machines – Safety requirements
EN 13113 — Tannery machines – Roller coating machines – Safety requirements
EN 13114 — Tannery machines – Rotating process vessels – Safety requirements
EN 1492-1 — Textile slings – Safety – Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
EN 1492-2 — Textile slings – Safety – Part 2: Roundslings made of man-made fibres for general purpose use
EN 1492-4 — Textile slings – Safety – Part 4: Lifting slings for general service made from natural and man-made fibre ropes
EN 972 — Tannery machines – Reciprocating roller machines – Safety requirements
EN ISO 11111-1 — Textile machinery – Safety requirements – Part 1: Common requirements (ISO 11111-1)
EN ISO 11111-2 — Textile machinery – Safety requirements – Part 2: Spinning preparatory and spinning machines (ISO 11111-2)
EN ISO 11111-3 — Textile machinery – Safety requirements – Part 3: Nonwoven machinery (ISO 11111-3)
EN ISO 11111-4 — Textile machinery – Safety requirements – Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4)
EN ISO 11111-5 — Textile machinery – Safety requirements – Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5)
EN ISO 11111-6 — Textile machinery – Safety requirements – Part 6: Fabric manufacturing machinery (ISO 11111-6)
EN ISO 11111-7 — Textile machinery – Safety requirements – Part 7: Dyeing and finishing machinery (ISO 11111-7)

Plastics, rubber, foundry and metallurgy (21)

EN 1114-1 — Plastics and rubber machines – Extruders and extrusion lines – Part 1: Safety requirements for extruders
EN 1114-3 — Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs
EN 12012-1 — Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators and shredders
EN 12012-4 — Plastics and rubber machines – Size reduction machines – Part 4: Safety requirements for agglomerators
EN 12013 — Plastics and rubber machines – Internal mixers – Safety requirements
EN 12301 — Plastics and rubber machines – Calenders – Safety requirements
EN 12409 — Plastics and rubber machines – Thermoforming machines – Safety requirements
EN 1247 — Foundry machinery – Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi-continuous casting machines
EN 1248 — Foundry machinery – Safety requirements for abrasive blasting equipment
EN 13418 — Plastics and rubber machines – Winding machines for film or sheet – Safety requirements
EN 1417 — Plastics and rubber machines – Two-roll mills – Safety requirements
EN 14677 — Safety of machinery – Secondary steelmaking – Machinery and equipment for treatment of liquid steel
EN 14886 — Plastics and rubber machines – Bandknife cutting machines for block foams – Safety requirements
EN 15067 — Plastics and rubber machines – Film converting machines for bags and sacks – Safety requirements
EN 1612 — Plastics and rubber machines – Reaction moulding machines and plants – Safety requirements
EN 16474 — Plastics and rubber machines – Tyre curing machines – Safety requirements
EN 289 — Plastics and rubber machines – Compression moulding machines and transfer moulding machines – Safety requirements
EN 422 — Plastics and rubber machines – Blow moulding machines – Safety requirements
EN 710 — Safety requirements for foundry moulding and coremaking machinery and plant associated equipment
EN ISO 20430 — Plastics and rubber machines – Injection moulding machines – Safety requirements (ISO 20430)
EN ISO 23062 — Foundry machinery – Safety requirements for molding and coremaking machinery and associated equipment (ISO 23062)

Airports, railways and cableway installations (26)

EN 12312-1 — Aircraft ground support equipment – Specific requirements – Part 1: Passenger stairs
EN 12312-10 — Aircraft ground support equipment – Specific requirements – Part 10: Container/Pallet transfer transporters
EN 12312-12 — Aircraft ground support equipment – Specific requirements – Part 12: Potable water service equipment
EN 12312-13 — Aircraft ground support equipment – Specific requirements – Part 13: Lavatory service equipment
EN 12312-14 — Aircraft ground support equipment – Specific requirements – Part 14: Disabled/incapacitated passenger boarding vehicles
EN 12312-15 — Aircraft ground support equipment – Specific requirements – Part 15: Baggage and equipment tractors
EN 12312-16 — Aircraft ground support equipment – Specific requirements – Part 16: Air start equipment
EN 12312-17 — Aircraft ground support equipment – Specific requirements – Part 17: Air conditioning equipment
EN 12312-18 — Aircraft ground support equipment – Specific requirements – Part 18: Nitrogen or Oxygen units
EN 12312-2 — Aircraft ground support equipment – Specific requirements – Part 2: Catering vehicles
EN 12312-20 — Aircraft ground support equipment – Specific requirements – Part 20: Electrical ground power units
EN 12312-3 — Aircraft ground support equipment – Specific requirements – Part 3: Conveyor belt vehicles
EN 12312-4 — Aircraft ground support equipment – Specific requirements – Part 4: Passenger boarding bridges
EN 12312-5 — Aircraft ground support equipment – Specific requirements – Part 5: Aircraft fuelling equipment
EN 12312-6 — Aircraft ground support equipment – Specific requirements – Part 6: Deicers and de-icing/anti-icing equipment
EN 12312-7 — Aircraft ground support equipment – Specific requirements – Part 7: Aircraft movement equipment
EN 12312-9 — Aircraft ground support equipment – Specific requirements – Part 9: Container/Pallet loaders
EN 13977 — Railway applications – Track – Safety requirements for portable machines and trolleys for construction and maintenance
EN 14033-3 — Railway applications – Track – Railbound construction and maintenance machines – Part 3: General safety requirements
EN 14033-4 — Railway applications – Track – Railbound construction and maintenance machines – Part 4: Technical requirements for running, travelling and working on urban rail
EN 15746-2 — Railway applications – Track – Road-rail machines and associated equipment – Part 2: General safety requirements
EN 15954-2 — Railway applications – Track – Trailers and associated equipment – Part 2: General safety requirements
EN 15955-2 — Railway applications – Infrastructure – Demountable machines, trailers and associated equipment – Part 2: General safety requirements
EN 17639 — Safety of machinery – Cableway installations designed for the transport of material and specially designated persons – General safety requirements
EN 1915-1 — Aircraft ground support equipment – General requirements – Part 1: Basic safety requirements
EN 1915-2 — Aircraft ground support equipment – General requirements – Part 2: Stability and strength requirements, calculations and test methods

Pumps, compressors, burners and thermal plants (17)

EN 1012-1 — Compressors and vacuum pumps – Safety requirements – Part 1: Air compressors
EN 1012-2 — Compressors and vacuum pumps – Safety requirements – Part 2: Vacuum pumps
EN 1012-3 — Compressors and vacuum pumps – Safety requirements – Part 3: Process compressors
EN 1028-1 — Fire-fighting pumps – Fire-fighting centrifugal pumps with primer – Part 1: Classification – General and safety requirements
EN 1028-2 — Fire-fighting pumps – Fire-fighting centrifugal pumps with primer – Part 2: Verification of general and safety requirements
EN 12693 — Refrigerating systems and heat pumps – Safety and environmental requirements – Positive displacement refrigerant compressors
EN 14466 — Fire-fighting pumps – Portable pumps – Safety and performance requirements, tests
EN 14710-1 — Fire-fighting pumps – Fire-fighting centrifugal pumps without primer – Part 1: Classification, general and safety requirements
EN 14710-2 — Fire-fighting pumps – Fire-fighting centrifugal pumps without primer – Part 2: Verification of general and safety requirements
EN 267 — Automatic forced draught burners for liquid fuels
EN 303-5 — Heating boilers – Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW – Terminology, requirements, testing and marking
EN 378-2 — Refrigerating systems and heat pumps – Safety and environmental requirements – Part 2: Design, construction, testing, marking and documentation
EN 60335-2-40 — Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
EN 676 — Automatic forced draught burners for gaseous fuels
EN 746-1 — Industrial thermoprocessing equipment – Part 1: Common safety requirements for industrial thermoprocessing equipment
EN 746-2 — Industrial thermoprocessing equipment – Part 2: Safety requirements for combustion and fuel handling systems
EN 746-3 — Industrial thermoprocessing equipment – Part 3: Safety requirements for the generation and use of atmosphere gases

Portable tools, gardening and light equipment (75)

EN 13683 — Garden equipment – Integrally powered shredders/chippers – Safety
EN 13684 — Garden equipment – Pedestrian controlled lawn aerators and scarifiers – Safety
EN 14910 — Garden equipment – Walk-behind combustion engine powered trimmers – Safety
EN 15027 — Transportable wall saw and wire saw equipment for job site – Safety
EN 15163-2 — Machines and installations for the exploitation and processing of natural stone – Safety – Part 2: Requirements for transportable diamond wire saws
EN 15503 — Garden equipment – Garden blowers, vacuums and blower/vacuums – Safety
EN 15895 — Powder actuated hand-held fixing and hard marking tools – Safety requirements
EN 16712-4 — Portable equipment for projecting extinguishing agents supplied by firefighting pumps – Portable foam equipment – Part 4: High expansion foam generators PN16
EN 50434 — Safety of household and similar appliances – Particular requirements for mains operated shredders and chippers
EN 50580 — Safety of hand-held electric motor operated tools – Particular requirements for spray guns
EN 50636-2-100 — Household and similar electrical appliances – Safety – Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums
EN 50636-2-107 — Safety of household and similar appliances – Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers
EN 50636-2-94 — Household and similar electrical appliances – Safety – Part 2-94: Particular requirements for scissors type grass shears
EN 60745-1 — Hand-held motor-operated electric tools – Safety – Part 1: General requirements
EN 60745-2-12 — Hand-held motor-operated electric tools – Safety – Part 2-12: Particular requirements for concrete vibrators
EN 60745-2-13 — Hand-held motor-operated electric tools – Safety – Part 2-13: Particular requirements for chain saws
EN 60745-2-14 — Hand-held motor-operated electric tools – Safety – Part 2-14: Particular requirements for planers
EN 60745-2-15 — Hand-held motor-operated electric tools – Safety – Part 2-15: Particular requirements for hedge trimmers
EN 60745-2-16 — Hand-held motor-operated electric tools – Safety – Part 2-16: Particular requirements for tackers
EN 60745-2-18 — Hand-held motor-operated electric tools – Safety – Part 2-18: Particular requirements for strapping tools
EN 60745-2-19 — Hand-held motor-operated electric tools – Safety – Part 2-19: Particular requirements for jointers
EN 60745-2-21 — Hand-held motor-operated electric tools – Safety – Part 2-21: Particular requirements for drain cleaners
EN 60745-2-22 — Hand-held motor-operated electric tools – Safety – Part 2-22: Particular requirements for cut-off machines
EN 60745-2-23 — Hand-held motor-operated electric tools – Safety – Part 2-23: Particular requirements for die grinders and small rotary tools
EN 60745-2-3 — Hand-held motor-operated electric tools – Safety – Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
EN 60745-2-4 — Hand-held motor-operated electric tools – Safety – Part 2-4: Particular requirements for sanders and polishers other than disk type
EN 61029-1 — Safety of transportable motor-operated electric tools – Part 1: General requirements
EN 61029-2-10 — Safety of transportable motor-operated electric tools – Part 2-10: Particular requirements for cutting-off grinders
EN 61029-2-11 — Safety of transportable motor-operated electric tools – Part 2-11: Particular requirements for combined mitre and bench saws
EN 61029-2-12 — Safety of transportable motor-operated electric tools – Part 2-12: Particular requirements for threading machines
EN 61029-2-3 — Safety of transportable motor-operated electric tools – Part 2-3: Particular requirements for planers and thicknessers
EN 61029-2-8 — Safety of transportable motor-operated electric tools – Part 2-8: Particular requirements for single spindle vertical moulders
EN 61029-2-9 — Safety of transportable motor-operated electric tools – Part 2-9: Particular requirements for mitre saws
EN 62841-1 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 1: General requirements
EN 62841-2-1 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-10 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-10: Particular requirements for hand-held mixers
EN 62841-2-11 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-11: Particular requirements for hand-held reciprocating saws
EN 62841-2-14 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-14: Particular requirements for hand-held planers
EN 62841-2-17 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-17: Particular requirements for hand-held routers
EN 62841-2-2 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2, modified)
EN 62841-2-21 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-21: Particular requirements for hand-held drain cleaners
EN 62841-2-4 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4, modified)
EN 62841-2-8 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-8: Particular requirements for hand-held shears and nibblers
EN 62841-2-9 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-9: Particular requirements for hand-held tappers and threaders
EN 62841-3-1 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1, modified)
EN 62841-3-10 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-10: Particular requirements for transportable cut-off machines
EN 62841-3-12 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-12: Particular requirements for transportable threading machines
EN 62841-3-13 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-13: Particular requirements for transportable drills
EN 62841-3-14 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-14: Particular requirements for transportable drain cleaners
EN 62841-3-4 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-4: Particular requirements for transportable bench grinders
EN 62841-3-6 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6, modified)
EN 62841-3-9 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-9: Particular requirements for transportable mitre saws
EN 62841-4-1 — Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery – Safety – Part 4-1: Particular requirements for chain saws
EN 62841-4-2 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-2: Particular requirements for hedge trimmers
EN IEC 62841-2-3 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders
EN IEC 62841-2-6 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-6: Particular requirements for hand-held hammers EN IEC 62841-2-6
EN IEC 62841-3-7 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-7: Particular requirements for transportable wall saws EN IEC 62841-3-7
EN IEC 62841-3-9 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-9: Particular requirements for transportable mitre saws EN IEC 62841-3-9
EN IEC 62841-4-5 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-5: Particular requirements for grass shears EN IEC 62841-4-5
EN IEC 62841-4-7 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators EN IEC 62841-4-7
EN ISO 10517 — Powered hand-held hedge trimmers – Safety (ISO 10517)
EN ISO 11148-1 — Hand-held non-electric power tools – Safety requirements – Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1)
EN ISO 11148-10 — Hand-held non-electric power tools – Safety requirements – Part 10: Compression power tools (ISO 11148-10)
EN ISO 11148-11 — Hand-held non-electric power tools – Safety requirements – Part 11: Nibblers and shears (ISO 11148-11)
EN ISO 11148-12 — Hand-held non-electric power tools – Safety requirements – Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12)
EN ISO 11148-13 — Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools (ISO 11148-13)
EN ISO 11148-2 — Hand-held non-electric power tools – Safety requirements – Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2)
EN ISO 11148-3 — Hand-held non-electric power tools – Safety requirements – Part 3: Drills and tappers (ISO 11148-3)
EN ISO 11148-4 — Hand-held non-electric power tools – Safety requirements – Part 4: Non-rotary percussive power tools (ISO 11148-4)
EN ISO 11148-5 — Hand-held non-electric power tools – Safety requirements – Part 5: Rotary percussive drills (ISO 11148-5)
EN ISO 11148-6 — Hand-held non-electric power tools – Safety requirements – Part 6: Assembly power tools for threaded fasteners (ISO 11148-6)
EN ISO 11148-7 — Hand-held non-electric power tools – Safety requirements – Part 7: Grinders (ISO 11148-7)
EN ISO 11148-8 — Hand-held non-electric power tools – Safety requirements – Part 8: Sanders and polishers (ISO 11148-8)
EN ISO 11148-9 — Hand-held non-electric power tools – Safety requirements – Part 9: Die grinders (ISO 11148-9)
EN ISO 19432-1 — Building construction machinery and equipment – Portable, hand-held, internal combustion engine-driven abrasive cutting machines – Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1)

Other product / sectoral standards (254)

EN 12001 — Conveying, spraying and placing machines for concrete and mortar – Safety requirements
EN 12044 — Footwear, leather and imitation leather goods manufacturing machines – Cutting and punching machines – Safety requirements
EN 12110 — Tunnelling machines – Air locks – Safety requirements
EN 12111 — Tunnelling machines – Road headers and continuous miners – Safety requirements
EN 12158-2 — Builders’ hoists for goods – Part 2: Inclined hoists with non-accessible load carrying devices
EN 12159 — Builders hoists for persons and materials with vertically guided cages
EN 12162 — Liquid pumps – Safety requirements – Procedure for hydrostatic testing
EN 12321 — Underground mining machinery – Specification for the safety requirements of armoured face conveyors
EN 12348 — Core drilling machines on stand – Safety
EN 12385-1 — Steel wire ropes – Safety – Part 1: General requirements
EN 12385-10 — Steel wire ropes – Safety – Part 10: Spiral ropes for general structural applications
EN 12385-2 — Steel wire ropes – Safety – Part 2: Definitions, designation and classification
EN 12385-3 — Steel wire ropes – Safety – Part 3: Information for use and maintenance
EN 12385-4 — Steel wire ropes – Safety – Part 4: Stranded ropes for general lifting applications
EN 12417 — Machine tools – Safety – Machining centres
EN 12418 — Masonry and stone cutting-off machines for job site – Safety
EN 12453 — Industrial, commercial and garage doors and gates – Safety in use of power operated doors – Requirements and test methods
EN 12547 — Centrifuges – Common safety requirements
EN 12581 — Coating plants – Machinery for dip coating and electrodeposition of organic liquid coating material – Safety requirements
EN 12609 — Truck mixers – Safety requirements
EN 12621 — Machinery for the supply and circulation of liquid coating materials – Safety requirements
EN 12629-1 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 1: Common requirements
EN 12629-2 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 2: Block making machines
EN 12629-3 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 3: Slide and turntable machines
EN 12629-4 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 4: Concrete roof tile making machines
EN 12629-5-1 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-1: Pipe making machines manufacturing in the vertical axis
EN 12629-5-2 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-2: Pipe making machines manufacturing in the horizontal axis
EN 12629-5-3 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-3: Pipe prestressing machines
EN 12629-5-4 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-4: Concrete pipe coating machines
EN 12629-6 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products
EN 12629-7 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 7: Stationary and mobile equipment for long line manufacture of prestressed products
EN 12629-8 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
EN 12635 — Industrial, commercial and garage doors and gates – Installation and use Warning: With regard to paragraph 5.1 and Annex D, this publication does not concern the reference to
EN 12649 — Concrete compactors and smoothing machines – Safety
EN 12653 — Footwear, leather and imitation leather manufacturing machines – Nailing machines – Safety requirements
EN 12717 — Safety of machine tools – Drilling machines
EN 12753 — Thermal cleaning systems for exhaust gas from surface treatment equipment – Safety requirements
EN 12757-1 — Mixing machinery for coating materials – Safety requirements – Part 1: Mixing machinery for use in vehicle refinishing
EN 12881-1 — Conveyor belts – Fire simulation flammability testing – Part 1: Propane burner tests
EN 12881-2 — Conveyor belts – Fire simulation flammability testing – Part 2: Large scale fire test
EN 12882 — Conveyor belts for general purpose use – Electrical and flammability safety requirements
EN 12921-1 — Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Part 1: Common safety requirements
EN 12921-2 — Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Part 2: Safety of machines using water based cleaning liquids
EN 12921-3 — Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Part 3: Safety of machines using flammable cleaning liquids
EN 12921-4 — Machines for surface cleaning and pretreatment of industrial items using liquids and vapours – Part 4: Safety of machines using halogenated solvents
EN 12978 — Industrial, commercial and garage doors and gates – Protective devices for power operated doors and gates – Requirements and test methods
EN 13020 — Road surface treatment machines – Safety requirements
EN 13035-1 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 1: Storage, handling and transportation equipment inside the factory
EN 13035-11 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 11: Drilling machines
EN 13035-2 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 2: Storage, handling and transportation equipment outside the factory
EN 13035-3 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 3: Cutting machines
EN 13035-4 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 4: Tilting tables
EN 13035-5 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 5: Machines and installations for stacking and de-stacking
EN 13035-6 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 6: Machines for break-out
EN 13035-7 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 7: Cutting machines for laminated glass
EN 13035-9 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 9: Washing installations
EN 13042-1 — Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 1: Gob feeder
EN 13042-2 — Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 2: Handling machines for feeding
EN 13042-3 — Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 3: IS machines
EN 13042-5 — Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 5: Presses
EN 13102 — Ceramic machines – Safety – Loading and unloading of fine clay tiles
EN 13120 — Internal blinds – Performance requirements including safety
EN 13204 — Powered rescue tools for fire and rescue service use – Safety and performance requirements
EN 13241 — Industrial, commercial, garage doors and gates – Product standard, performance characteristics
EN 13289 — Pasta processing plants – Dryers and coolers – Safety and hygiene requirements
EN 13378 — Pasta processing plants – Pasta presses – Safety and hygiene requirements
EN 13379 — Pasta processing plants – Spreader, stripping and cutting machine, stick return conveyor, stick magazine – Safety and hygiene requirements
EN 13414-1 — Steel wire rope slings – Safety – Part 1: Slings for general lifting service
EN 13414-2 — Steel wire rope slings – Safety – Part 2: Specification for information for use and maintenance to be provided by the manufacturer
EN 13414-3 — Steel wire rope slings – Safety – Part 3: Grommets and cable-laid slings
EN 13457 — Footwear, leather and imitation leather goods manufacturing machines – Splitting, skiving, cutting, cementing and cement drying machines – Safety requirements
EN 13561 — External blinds and awnings – Performance requirements including safety
EN 13617-1 — Petrol filling stations – Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
EN 13659 — Shutters and external venetian blinds – Performance requirements including safety
EN 13675 — Safety of machinery – Safety requirements for tube forming and rolling mills and their finishing line equipment
EN 13731 — Lifting bag systems for fire and rescue service use – Safety and performance requirements
EN 13862 — Floor cutting-off machines – Safety
EN 13889 — Forged steel shackles for general lifting purposes – Dee shackles and bow shackles – Grade 6 – Safety
EN 13898 — Machine tools – Safety – Sawing machines for cold metal
EN 13951 — Liquid pumps – Safety requirements – Agrifoodstuffs equipment; Design rules to ensure hygiene in use
EN 1398 — Dock levellers – Safety requirements
EN 13985 — Machine tools – Safety – Guillotine shears
EN 14010 — Safety of machinery – Equipment for power driven parking of motor vehicles – Safety and EMC requirements for design, manufacturing, erection and commissioning stages
EN 14043 — High rise aerial appliances for fire and rescue service use – Turntable ladders with combined movements – Safety and performance requirements and test methods
EN 14044 — High rise aerial appliances for fire and rescue service use – Turntable ladders with sequential movements – Safety and performance requirements and test methods
EN 14070 — Safety of machine tools – Transfer and special-purpose machines
EN 14656 — Safety of machinery – Safety requirements for extrusion presses for steel and non-ferrous metals
EN 14658 — Continuous handling equipment and systems – General safety requirements for continuous handling equipment for opencast lignite mining
EN 14681 — Safety of machinery – Safety requirements for machinery and equipment for production of steel by electric arc furnaces
EN 14753 — Safety of machinery – Safety requirements for machinery and equipment for continuous casting of steel
EN 14973 — Conveyor belts for use in underground installations – Electrical and flammability safety requirements
EN 1501-1 — Refuse collection vehicles – General requirements and safety requirements – Part 1: Rear loaded refuse collection vehicles
EN 1501-2 — Refuse collection vehicles – General requirements and safety requirements – Part 2: Side loaded refuse collection vehicles
EN 1501-3 — Refuse collection vehicles – General requirements and safety requirements – Part 3: Front loaded refuse collection vehicles
EN 1501-5 — Refuse collection vehicles – General requirements and safety requirements – Part 5: Lifting devices for refuse collection vehicles
EN 15059 — Snow grooming equipment – Safety requirements
EN 15061 — Safety of machinery – Safety requirements for strip processing line machinery and equipment
EN 15093 — Safety of Machinery – Safety requirements for hot flat rolling mills
EN 15094 — Safety of Machinery – Safety requirements for cold flat rolling mills
EN 15162 — Machines and plants for mining and tooling of natural stone – Safety requirements for gang saws
EN 15163-1 — Machines and installations for the exploitation and processing of natural stone – Safety – Part 1: Requirements for stationary diamond wire saws
EN 15164 — Machines and plants for mining and tooling of natural stone – Safety – Requirements for chain- and belt-slotting machines
EN 15194 — Cycles – Electrically power assisted cycles – EPAC Bicycles
EN 15268 — Petrol filling stations – Safety requirements for the construction of submersible pump assemblies
EN 1539 — Dryers and ovens, in which flammable substances are released – Safety requirements
EN 1550 — Machine-tools safety – Safety requirements for the design and construction of work holding chucks
EN 1554 — Conveyor belts – Drum friction testing
EN 15571 — Machines and plants for mining and tooling of natural stone – Safety – Requirements for surface-finishing machines
EN 15572 — Machines and plants for mining and tooling of natural stone – Safety – Requirements for edge finishing machines
EN 15700 — Safety for conveyor belts for winter sport or tourist use
EN 15830 — Rough-terrain variable reach trucks – Visibility – Test methods and verification
EN 15949 — Safety of machinery – Safety requirements for bar mills, structural steel mills and wire rod mills
EN 15967 — Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
EN 15997 — All terrain vehicles (ATVs – Quads) – Safety requirements and test methods
EN 16005 — Power operated pedestrian doorsets – Safety in use – Requirements and test methods
EN 16029 — Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads – Single- track two-wheel motor vehicles – Safety requirements and test methods
EN 16191 — Tunnelling machinery – Safety requirements
EN 16228-1 — Drilling and foundation equipment – Safety – Part 1: Common requirements
EN 16228-2 — Drilling and foundation equipment – Safety – Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
EN 16228-3 — Drilling and foundation equipment – Safety – Part 3: Horizontal directional drilling equipment (HDD)
EN 16228-4 — Drilling and foundation equipment – Safety – Part 4: Foundation equipment
EN 16228-5 — Drilling and foundation equipment – Safety – Part 5: Diaphragm walling equipment
EN 16228-6 — Drilling and foundation equipment – Safety – Part 6: Jetting, grouting and injection equipment
EN 16228-7 — Drilling and foundation equipment – Safety – Part 7: Interchangeable auxiliary equipment
EN 16230-1 — Leisure karts – Part 1: Safety requirements and test methods for karts
EN 16252 — Machines for compacting waste materials or recyclable fractions – Horizontal baling presses – Safety requirements
EN 16327 — Fire-fighting – Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
EN 16486 — Machines for compacting waste materials or recyclable fractions – Compactors – Safety requirements
EN 16500 — Machines for compacting waste materials or recyclable fractions – Vertical baling presses – Safety requirements
EN 1677-1 — Components for slings – Safety – Part 1: Forged steel components, Grade 8
EN 1677-2 — Components for slings – Safety – Part 2: Forged steel lifting hooks with latch, Grade 8
EN 1677-3 — Components for slings – Safety – Part 3: Forged steel self- locking hooks – Grade 8
EN 1677-4 — Components for slings – Safety – Part 4: Links, Grade 8
EN 1677-5 — Components for slings – Safety – Part 5: Forged steel lifting hooks with latch – Grade 4
EN 1677-6 — Components for slings – Safety – Part 6: Links – Grade 4
EN 16774 — Safety of machinery – Safety requirements for steel converter and associated equipment
EN 1679-1 — Reciprocating internal combustion engines – Safety – Part 1: Compression ignition engines
EN 16808 — Petroleum, petrochemical and natural gas industries – Safety of machineries – Manual elevators
EN 16985 — Spray booths for organic coating material – Safety requirements
EN 17003 — Road vehicles – Roller brake testers for vehicles of more than 3.5 tons GVW – Safety requirements
EN 17059 — Plating and anodizing lines – Safety requirements
EN 17088 — Side curtain ventilation systems – Safety
EN 17106-1 — Road operation machinery – Safety – Part 1: General requirements
EN 17106-2 — Road operation machinery – Safety – Part 2: Specific requirements for road surface cleaning machines
EN 17106-3-1 — Road operation machinery – Safety – Part 3-1: Winter service machines – Requirements for snow clearing machines with rotating tools and snow ploughs
EN 17106-3-2 — Road operation machinery – Safety – Part 3-2: Winter service machines – Specific requirements for spreading machines
EN 17106-4 — Road operation machinery – Safety – Part 4: Road service area maintenance machines – Requirements for grass and brush cutting machines
EN 17281 — Safety requirements – Vehicle cleaning equipment
EN 17352 — Power operated pedestrian entrance control equipment – Safety in use – Requirements and test methods
EN 17624 — Determination of explosion limits of gases and vapours at elevated pressures, elevated temperatures or with oxidizers other than air
EN 17942 — Welding and allied processes – Gas welding equipment – Safety requirements for thermoprocess equipment with open firing oxy-fuel gas welding equipment
EN 1829-1 — High-pressure water jet machines – Safety requirements – Part 1: Machines
EN 1829-2 — High-pressure water jet machines – Safety requirements – Part 2: Hoses, hose lines and connectors
EN 1837 — Safety of machinery – Integral lighting of machines
EN 1845 — Footwear manufacturing machines – Footwear moulding machines – Safety requirements
EN 1846-2 — Firefighting and rescue service vehicles – Part 2: Common requirements – Safety and performance
EN 1846-3 — Firefighting and rescue service vehicles – Part 3: Permanently installed equipment – Safety and performance
EN 1889-2 — Machines for underground mines – Mobile machines working underground – Safety – Part 2: Rail locomotives
EN 1953 — Application equipment for coating materials – Safety requirements
EN 50569 — Household and similar electrical appliances – Safety – Particular requirements for commercial electric spin extractors
EN 50570 — Household and similar electrical appliances – Safety – Particular requirements for commercial electric tumble dryers
EN 50571 — Household and similar electrical appliances – Safety – Particular requirements for commercial electric washing machines
EN 50636-2-91 — Household and similar electrical appliances – Safety – Part 2-91: Particular requirements for walk-behind and hand- held lawn trimmers and lawn edge trimmers
EN 50636-2-92 — Household and similar electrical appliances – Safety – Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
EN 528 — Rail dependent storage and retrieval equipment – Safety requirements for S/R machines
EN 60204-1 — Safety of machinery – Electrical equipment of machines – Part 1: General requirements
EN 60204-31 — Safety of machinery – Electrical equipment of machines – Part 31: Particular safety and EMC requirements for sewing machines, units and systems
EN 60204-32 — Safety of machinery – Electrical equipment of machines – Part 32: Requirements for hoisting machines
EN 60204-33 — Safety of machinery – Electrical equipment of machines – Part 33: Requirements for semiconductor fabrication equipment
EN 60335-1 — Household and similar electrical appliances – Safety – Part 1: General requirements
EN 60335-2-102 — Household and similar electrical appliances – Safety – Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
EN 60335-2-103 — Household and similar electrical appliances – Safety – Part 2-103: Particular requirements for drives for gates, doors and windows
EN 60335-2-23 — Household and similar electrical appliances – Safety – Part 2-23: Particular requirements for appliances for skin or hair care
EN 60335-2-36 — Household and similar electrical appliances – Safety – Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
EN 60335-2-37 — Household and similar electrical appliances – Safety – Part 2-37: Particular requirements for commercial electric deep fat fryers
EN 60335-2-42 — Household and similar electrical appliances – Safety – Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam- convection ovens
EN 60335-2-47 — Household and similar electrical appliances – Safety – Part 2-47: Particular requirements for commercial electric boiling pans
EN 60335-2-48 — Household and similar electrical appliances – Safety – Part 2-48: Particular requirements for commercial electric grillers and toasters
EN 60335-2-49 — Household and similar electrical appliances – Safety – Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm
EN 60335-2-58 — Household and similar electrical appliances – Safety – Part 2-58: Particular requirements for commercial electric dishwashing machines
EN 60335-2-65 — Household and similar electrical appliances – Safety – Part 2-65: Particular requirements for air-cleaning appliances
EN 60335-2-67 — Household and similar electrical appliances – Safety – Part 2-67: Particular requirements for floor treatment machines for commercial use
EN 60335-2-68 — Household and similar electrical appliances – Safety – Part 2-68: Particular requirements for spray extraction machines, for commercial use
EN 60335-2-69 — Household and similar electrical appliances – Safety – Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
EN 60335-2-72 — Household and similar electrical appliances – Safety – Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use
EN 60335-2-79 — Household and similar electrical appliances – Safety – Part 2-79: Particular requirements for high pressure cleaners and steam cleaners
EN 60335-2-8 — Household and similar electrical appliances – Safety – Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
EN 60335-2-95 — Household and similar electrical appliances – Safety – Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use
EN 60335-2-97 — Household and similar electrical appliances – Safety – Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
EN 60519-1 — Safety in installations for electroheating and electromagnetic processing – Part 1: General requirements
EN 60947-5-3 — Low-voltage switchgear and controlgear – Part 5-3: Control circuit devices and switching elements – Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
EN 61310-2 — Safety of machinery – Indication, marking and actuation — Part 2: Requirements for marking
EN 61310-3 — Safety of machinery – Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators
EN 61496-1 — Safety of machinery – Electro-sensitive protective equipment – Part 1: General requirements and tests
EN 617 — Continuous handling equipment and systems – Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
EN 618 — Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
EN 61800-5-2 — Adjustable speed electrical power drive systems — Part 5-2: Safety requirements – Functional
EN 619 — Continuous handling equipment and systems – Safety requirements for equipment for mechanical handling of unit loads
EN 620 — Continuous handling equipment and systems – Safety requirements for fixed belt conveyors for bulk materials
EN 62745 — Safety of machinery – Requirements for cableless control systems of machinery
EN 809 — Pumps and pump units for liquids – Common safety requirements
EN 818-1 — Short link chain for lifting purposes – Safety – Part 1: General conditions of acceptance
EN 818-2 — Short link chain for lifting purposes – Safety – Part 2: Medium tolerance chain for chain slings – Grade 8
EN 818-3 — Short link chain for lifting purposes – Safety – Part 3: Medium tolerance chain for chain slings – Grade 4
EN 818-4 — Short link chain for lifting purposes – Safety – Part 4: Chain slings – Grade 8
EN 818-5 — Short link chain for lifting purposes – Safety – Part 5: Chain slings – Grade 4
EN 818-6 — Short link chain for lifting purposes – Safety – Part 6: Chain slings – Specification for information for use and maintenance to be provided by the manufacturer
EN 818-7 — Short link chain for lifting purposes – Safety – Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)
EN 869 — Safety of machinery – Safety requirements for pressure metal diecasting units
EN 930 — Footwear, leather and imitation leather goods manufacturing machines – Roughing, scouring, polishing and trimming machines – Safety requirements
EN 931 — Footwear manufacturing machines – Lasting machines – Safety requirements
EN 957-6 — Stationary training equipment – Part 6: Treadmills, additional specific safety requirements and test methods
EN 981 — Safety of machinery – System of auditory and visual danger and information signals
EN IEC 60204-11 — Safety of machinery – Electrical equipment of machines – Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV
EN IEC 60335-2-119 — Household and similar electrical appliances – Safety – Part 2-119: Particular requirements for commercial vacuum packaging appliances EN IEC 60335-2-119
EN IEC 60335-2-41 — Household and similar electrical appliances – Safety – Particular requirements for pumps EN IEC 60335-2-41
EN IEC 62061 — Safety of machinery – Functional safety of safety-related control systems
EN ISO 10218-1 — Robots and robotic devices – Safety requirements for industrial robots – Part 1: Robots (ISO 10218-1)
EN ISO 10218-2 — Robots and robotic devices – Safety requirements for industrial robots – Part 2: Robot systems and integration (ISO 10218-2)
EN ISO 10472-1 — Safety requirements for industrial laundry machinery – Part 1: Common requirements (ISO 10472-1)
EN ISO 10472-2 — Safety requirements for industrial laundry machinery – Part 2: Washing machines and washer-extractors (ISO 10472- 2)
EN ISO 10472-3 — Safety requirements for industrial laundry machinery – Part 3: Washing tunnel lines including component machines (ISO 10472-3)
EN ISO 10472-4 — Safety requirements for industrial laundry machinery – Part 4: Air dryers (ISO 10472-4)
EN ISO 10472-5 — Safety requirements for industrial laundry machinery – Part 5: Flatwork ironers, feeders and folders (ISO 10472-5)
EN ISO 10472-6 — Safety requirements for industrial laundry machinery – Part 6: Ironing and fusing presses (ISO 10472-6)
EN ISO 10821 — Industrial sewing machines – Safety requirements for sewing machines, units and systems (ISO 10821)
EN ISO 11102-1 — Reciprocating internal combustion engines – Handle starting equipment – Part 1: Safety requirements and tests (ISO 11102-1)
EN ISO 11102-2 — Reciprocating internal combustion engines – Handle starting equipment – Part 2: Method of testing the angle of disengagement (ISO 11102-2)
EN ISO 11161 — Safety of machinery – Integrated manufacturing systems – Basic requirements (ISO 11161)
EN ISO 13482 — Robots and robotic devices – Safety requirements for personal care robots (ISO 13482)
EN ISO 13766-2 — Earth-moving and building construction machinery – Electromagnetic compatibility (EMC) of machines with internal electrical power supply – Part 2: Additional EMC requirements for functional safety (ISO 13766-2)
EN ISO 14118 — Safety of machinery – Prevention of unexpected start-up (ISO 14118)
EN ISO 14122-1 — Safety of machinery – Permanent means of access – Part 1: Choice of fixed means and general requirements (ISO 14122-1)
EN ISO 14122-3 — Safety of machinery – Permanent means of access – Part 3: Stairs, stepladders and guard-rails (ISO 14122-3)
EN ISO 14122-4 — Safety of machinery – Permanent means of access – Part 4: Fixed ladders (ISO 14122-4)
EN ISO 14159 — Safety of machinery – Hygiene requirements for the design of machinery (ISO 14159)
EN ISO 14314 — Reciprocal internal combustion engines – Recoil starting equipment – General safety requirements (ISO 14314)
EN ISO 16089 — Machine tools – Safety – Stationary grinding machines (ISO 16089)
EN ISO 16092-1 — Machine tools safety – Presses – Part 1: General safety requirements (ISO 16092-1)
EN ISO 16092-2 — Machine tools safety – Presses – Part 2: Safety requirement for mechanical presses (ISO 16092-2)
EN ISO 16093 — Machine tools – Safety – Sawing machines for cold metal (ISO 16093)
EN ISO 17916 — Safety of thermal cutting machines (ISO 17916)
EN ISO 19225 — Underground mining machines – Mobile extracting machines at the face – Safety requirements for shearer loaders and plough systems (ISO 19225)
EN ISO 19296 — Mining – Mobile machines working underground – Machine safety (ISO 19296)
EN ISO 20607 — Safety of machinery – Instruction handbook – General drafting principles (ISO 20607)
EN ISO 21904-1 — Health and safety in welding and allied processes – Equipment for capture and separation of welding fume – Part 1: General requirements (ISO 21904-1)
EN ISO 22291 — Safety requirements for wetlaid-nonwoven machinery (ISO 22291)
EN ISO 23125 — Machine tools – Safety – Turning machines (ISO 23125)
EN ISO 28881 — Machine tools – Safety – Electrical discharge machines (ISO 28881)
EN ISO 3266 — Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266)
EN ISO 8230-1 — Safety requirements for dry-cleaning machines – Part 1: Common safety requirements (ISO 8230-1)
EN ISO 8230-2 — Safety requirements for dry-cleaning machines – Part 2: Machines using perchloroethylene (ISO 8230-2)
EN ISO 8230-3 — Safety requirements for dry-cleaning machines – Part 3: Machines using combustible solvents (ISO 8230-3)
EN ISO 8528-13 — Reciprocating internal combustion engine driven alternating current generating sets – Part 13: Safety (ISO 8528-13, Corrected version 2016-10-15)