Di seguito l’elenco delle Norme armonizzate in italiano ad oggi, da verificare durante la preparazione dell’Analisi del Rischio.

Totale riferimenti elencati: 837 norme armonizzate uniche.

Le sezioni sono organizzate per macro-famiglie tecniche per agevolare la consultazione.

Norme generali (15)

• EN 1127-1 — Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology
• EN 1127-2 — Explosive atmospheres – Explosion prevention and protection – Part 2: Basic concepts and methodology for underground mines
• EN 1672-2 — Food processing machinery – Basic concepts – Part 2: Hygiene requirements
• EN ISO 12100 — Sicurezza del macchinario – General principles for design – valutazione e riduzione del rischio (ISO 12100)
• EN ISO 12100-1 — Sicurezza del macchinario – Concetti fondamentali, principi generali di progettazione – Part 1: Basic terminology, methodology (ISO 12100- 1)
• EN ISO 12100-2 — Sicurezza del macchinario – Concetti fondamentali, principi generali di progettazione – Part 2: Technical principles (ISO 12100-2)
• EN ISO 13849-1 — Sicurezza del macchinario – Safety-related parts of control systems – Part 1: General principles for design (ISO 13849- 1)
• EN ISO 13850 — Safety of machinery – Emergency stop function – Principles for design (ISO 13850)
• EN ISO 13851 — Safety of machinery – Two-hand control devices – Principles for design and selection (ISO 13851)
• EN ISO 13856-1 — Sicurezza del macchinario – Pressure-sensitive protective devices – Part 1: General principles for design and testing of pressure- sensitive mats and pressure-sensitive floors (ISO 13856- 1)
• EN ISO 13856-2 — Sicurezza del macchinario – Pressure-sensitive protective devices – Part 2: General principles for design and testing of pressure- sensitive edges and pressure-sensitive bars (ISO 13856- 2)
• EN ISO 13856-3 — Sicurezza del macchinario – Pressure-sensitive protective devices – Part 3: General principles for design and testing of pressure- sensitive bumpers, plates, wires and similar devices (ISO 13856-3)
• EN ISO 14119 — Safety of machinery – Interlocking devices associated with guards – Principles for design and selection (ISO 14119)
• EN ISO 18497 — Agricultural machines and tractors – Safety of highly automated agricultural machines – Principles for design (ISO 18497)
• EN ISO 25119-1 — Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 1: General principles for design and development (ISO 25119-1)

Ergonomia, interfaccia uomo-macchina (20)

• EN 1005-1 — Sicurezza del macchinario – Human physical performance – Part 1: Terms and definitions
• EN 1005-2 — Sicurezza del macchinario – Human physical performance – Part 2: Manual handling of machinery and component parts of machinery
• EN 1005-3 — Sicurezza del macchinario – Human physical performance – Part 3: Recommended force limits for machinery operation
• EN 1005-4 — Sicurezza del macchinario – Human physical performance – Part 4: Evaluation of working postures and movements in relation to machinery
• EN 547-1 — Sicurezza del macchinario – Human body measurements – Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
• EN 547-2 — Sicurezza del macchinario – Human body measurements – Part 2: Principles for determining the dimensions required for access openings
• EN 547-3 — Sicurezza del macchinario – Human body measurements – Part 3: Anthropometric data
• EN 614-1 — Sicurezza del macchinario – Ergonomic design principles – Part 1: Terminology and general principles
• EN 614-2 — Sicurezza del macchinario – Ergonomic design principles – Part 2: Interactions between the design of machinery and work tasks
• EN 842 — Sicurezza del macchinario – Visual danger signals – General requirements, design and testing
• EN 894-1 — Safety of machinery – Ergonomic requirements for the design of displays and control actuators – Part 1: General principles
• EN 894-2 — Safety of machinery – Ergonomic requirements for the design of displays and control actuators – Part 2: Displays
• EN 894-3 — Safety of machinery – Ergonomic requirements for the design of displays and control actuators – Part 3: Control actuators
• EN 894-4 — Safety of machinery – Ergonomic requirements for the design of displays and control actuators – Part 4: Location and arrangement
• EN ISO 13732-1 — Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces – Part 1: Hot surfaces (ISO 13732-1)
• EN ISO 13732-3 — Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces – Part 3: Cold surfaces (ISO 13732-3)
• EN ISO 13854 — Sicurezza del macchinario – Minimum gaps to avoid crushing of parts of the human body (ISO 13854)
• EN ISO 14738 — Sicurezza del macchinario – Anthropometric requirements for the design of workstations at machinery (ISO 14738, including Cor 1 and Cor 2)
• EN ISO 15536-1 — Ergonomics – Computer manikins and body templates – Part 1: General requirements (ISO 15536-1)
• EN ISO 7731 — Ergonomics – Danger signals for public and work areas – Auditory danger signals (ISO 7731)

Comandi, ripari e funzioni di sicurezza (9)

• EN 12965 — Tractors and machinery for agriculture and forestry – Power take-off (PTO) drive shafts and their guards – Safety
• EN 15811 — Macchine agricole – Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923 modified)
• EN 60947-5-5 — Low-voltage switchgear and controlgear – Part 5-5: Control circuit devices and switching elements – Electrical emergency stop device with mechanical latching function
• EN ISO 13849-2 — Sicurezza del macchinario – Safety-related parts of control systems – Part 2: Validation (ISO 13849-2)
• EN ISO 13855 — Sicurezza del macchinario – Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855)
• EN ISO 13857 — Sicurezza del macchinario – Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857)
• EN ISO 14120 — Sicurezza del macchinario – Ripari – General requirements for the design and construction of fixed and movable guards (ISO 14120)
• EN ISO 3457 — Earth-moving machinery – Guards – Definitions and requirements (ISO 3457)
• EN ISO 5674 — Tractors and machinery for agriculture and forestry – Ripari for power take-off (PTO) drive-shafts – Strength and wear tests and acceptance criteria (ISO 5674, corrected version 2005-07-01)

Agenti fisici, emissioni e rischi specifici (97)

• EN 1032 — Mechanical vibration – Testing of mobile machinery in order to determine the vibration emission value
• EN 1093-1 — Sicurezza del macchinario – Evaluation of the emission of airborne hazardous substances – Part 1: Selection of test methods
• EN 1093-11 — Sicurezza del macchinario – Evaluation of the emission of airborne hazardous substances – Part 11: Decontamination index
• EN 1093-2 — Sicurezza del macchinario – Evaluation of the emission of airborne hazardous substances – Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
• EN 1093-3 — Sicurezza del macchinario – Evaluation of the emission of airborne hazardous substances – Part 3: Test bench method for the measurement of the emission rate of a given pollutant
• EN 1093-4 — Sicurezza del macchinario – Evaluation of the emission of airborne hazardous substances – Part 4: Capture efficiency of an exhaust system – Tracer method
• EN 1093-6 — Sicurezza del macchinario – Evaluation of the emission of airborne hazardous substances – Part 6: Separation efficiency by mass, unducted outlet
• EN 1093-7 — Sicurezza del macchinario – Evaluation of the emission of airborne hazardous substances – Part 7: Separation efficiency by mass, ducted outlet
• EN 1093-8 — Sicurezza del macchinario – Evaluation of the emission of airborne hazardous substances – Part 8: Pollutant concentration parameter, test bench method
• EN 1093-9 — Sicurezza del macchinario – Evaluation of the emission of airborne hazardous substances – Part 9: Pollutant concentration parameter, room method
• EN 12053 — Safety of industrial trucks – Test methods for measuring noise emissions
• EN 12198-1 — Sicurezza del macchinario – Assessment and reduction of risks arising from radiation emitted by machinery – Part 1: General principles
• EN 12198-2 — Sicurezza del macchinario – Assessment and reduction of risks arising from radiation emitted by machinery – Part 2: Radiation emission measurement procedure
• EN 12198-3 — Sicurezza del macchinario – Assessment and reduction of risks arising from radiation emitted by machinery – Part 3: Reduction of radiation by attenuation or screening
• EN 12254 — Screens for laser working places – Safety requirements and testing
• EN 12545 — Footwear, leather and imitation leather goods manufacturing machines – Rumore test code – Common requirements
• EN 12549 — Acoustics – Rumore test code for fastener driving tools – Engineering method
• EN 1265 — Sicurezza del macchinario – Rumore test code for foundry machines and equipment
• EN 12786 — Sicurezza del macchinario – Requirements for the drafting of the vibration clauses of safety standards
• EN 1299 — Mechanical vibration and shock – Vibrazioni isolation of machines – Information for the application of source isolation
• EN 13023 — Rumore measurement methods for printing, paper converting, paper making machines and auxiliary equipment – Accuracy grades 2 and 3
• EN 13059 — Safety of industrial trucks – Test methods for measuring vibration
• EN 13490 — Mechanical vibration – Industrial trucks – Laboratory evaluation and specification of operator seat vibration
• EN 14462 — Surface treatment equipment – Rumore test code for surface treatment equipment including its ancillary handling equipment – Accuracy grades 2 and 3
• EN 1501-4 — Refuse collection vehicles – General requirements and safety requirements – Part 4: Rumore test code for refuse collection vehicles
• EN 1547 — Industrial thermoprocessing equipment – Rumore test code for industrial thermoprocessing equipment including its ancillary handling equipment
• EN 15695-1 — Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances – Part 1: Cab classification, requirements and test procedures
• EN 15695-2 — Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances – Part 2: Filters, requirements and test procedures
• EN 1710 — Equipment and components intended for use in potentially explosive atmospheres in underground mines
• EN 17348 — Requirements for design and testing of vacuum cleaners for use in potentially explosive atmospheres
• EN 1915-3 — Aircraft ground support equipment – General requirements – Part 3: Vibrazioni measurement methods and reduction
• EN 1915-4 — Aircraft ground support equipment – General requirements – Part 4: Rumore measurement methods and reduction
• EN 30326-1 — Mechanical vibration – Laboratory method for evaluating vehicle seat vibration – Part 1: Basic requirements (ISO 10326-1)
• EN 415-9 — Safety of packaging machines – Part 9: Rumore measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
• EN 61310-1 — Sicurezza del macchinario – Indication, marking and actuation — Part 1: Requirements for visual, acoustic and tactile signals
• EN ISO 10326-1 — Mechanical vibration – Laboratory method for evaluating vehicle seat vibration – Part 1: Basic requirements (ISO 10326-1, Corrected version 2017-02)
• EN ISO 11145 — Optics and photonics – Lasers and laser-related equipment – Vocabulary and symbols (ISO 11145)
• EN ISO 11201 — Acoustics – Rumore emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201)
• EN ISO 11202 — Acoustics – Rumore emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202)
• EN ISO 11203 — Acoustics – Rumore emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203)
• EN ISO 11204 — Acoustics – Rumore emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204)
• EN ISO 11205 — Acoustics – Rumore emitted by machinery and equipment – Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205)
• EN ISO 11252 — Lasers and laser-related equipment – Laser device – Minimum requirements for documentation (ISO 11252)
• EN ISO 11546-1 — Acoustics – Determination of sound insulation performances of enclosures – Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1)
• EN ISO 11546-2 — Acoustics – Determination of sound insulation performances of enclosures – Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546- 2)
• EN ISO 11553-1 — Sicurezza del macchinario – Laser processing machines – Part 1: Laser safety requirements (ISO 11553-1)
• EN ISO 11553-2 — Sicurezza del macchinario – Laser processing machines – Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2)
• EN ISO 11553-3 — Sicurezza del macchinario – Laser processing machines – Part 3: Rumore reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3)
• EN ISO 11554 — Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power, energy and temporal characteristics (ISO 11554)
• EN ISO 11688-1 — Acoustics – Recommended practice for the design of low- noise machinery and equipment – Part 1: Planning (ISO/TR 11688-1)
• EN ISO 11691 — Acoustics – Measurement of insertion loss of ducted silencers without flow – Laboratory survey method (ISO 11691)
• EN ISO 11957 — Acoustics – Determination of sound insulation performance of cabins – Laboratory and in situ measurements (ISO 11957)
• EN ISO 13753 — Mechanical vibration and shock – Hand-arm vibration – Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753)
• EN ISO 14123-1 — Sicurezza del macchinario – Reduction of risks to health resulting from hazardous substances emitted by machinery – Part 1: Principles and specifications for machinery manufacturers (ISO 14123-1)
• EN ISO 14123-2 — Sicurezza del macchinario – Reduction of risks to health resulting from hazardous substances emitted by machinery – Part 2: Methodology leading to verification procedures (ISO 14123- 2)
• EN ISO 15744 — Hand-held non-electric power tools – Rumore measurement code – Engineering method (grade 2) (ISO 15744)
• EN ISO 19353 — Sicurezza del macchinario – Fire prevention and fire protection (ISO 19353)
• EN ISO 20361 — Liquid pumps and pumps units – Rumore test code – Grades 2 and 3 of accuracy (ISO 20361)
• EN ISO 20643 — Mechanical vibration – Hand-held and hand-guided machinery – Principles for evaluation of vibration emission (ISO 20643)
• EN ISO 2151 — Acoustics – Rumore test code for compressors and vacuum pumps – Engineering method (Grade 2) (ISO 2151)
• EN ISO 22867 — Forestry and gardening machinery – Vibrazioni test code for portable hand-held machines with internal combustion engine – Vibrazioni at the handles (ISO 22867)
• EN ISO 22868 — Forestry and gardening machinery – Rumore test code for portable hand-held machines with internal combustion engine – Engineering method (Grade 2 accuracy) (ISO 22868)
• EN ISO 28927-1 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 1: Angle and vertical grinders (ISO 28927-1)
• EN ISO 28927-10 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 10: Percussive drills, hammers and breakers (ISO 28927-10)
• EN ISO 28927-11 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 11: Stone hammers (ISO 28927-11)
• EN ISO 28927-12 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 12: Die grinders (ISO 28927-12)
• EN ISO 28927-13 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 13: Fastener driving tools (ISO 28927-13)
• EN ISO 28927-2 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2)
• EN ISO 28927-3 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927- 3)
• EN ISO 28927-4 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4)
• EN ISO 28927-5 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 5: Drills and impact drills (ISO 28927-5)
• EN ISO 28927-6 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 6: Rammers (ISO 28927-6)
• EN ISO 28927-7 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 7: Nibblers and shears (ISO 28927-7)
• EN ISO 28927-8 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8)
• EN ISO 28927-9 — Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 9: Scaling hammers and needle scalers (ISO 28927-9)
• EN ISO 3741 — Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for reverberation test rooms (ISO 3741)
• EN ISO 3743-1 — Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for small movable sources in reverberant fields – Part 1: Comparison method for a hard- walled test room (ISO 3743-1)
• EN ISO 3743-2 — Acoustics – Determination of sound power levels of noise sources using sound pressure – Engineering methods for small, movable sources in reverberant fields – Part 2: Methods for special reverberation test rooms (ISO 3743- 2)
• EN ISO 3744 — Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for an essentially free field over a reflecting plane (ISO 3744)
• EN ISO 3745 — Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745)
• EN ISO 3746 — Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746)
• EN ISO 3747 — Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering/survey methods for use in situ in a reverberant environment (ISO 3747)
• EN ISO 4871 — Acoustics – Declaration and verification of noise emission values of machinery and equipment (ISO 4871)
• EN ISO 5136 — Acoustics – Determination of sound power radiated into a duct by fans and other air-moving devices – In-duct method (ISO 5136)
• EN ISO 7096 — Earth-moving machinery – Laboratory evaluation of operator seat vibration (ISO 7096)
• EN ISO 7235 — Acoustics – Laboratory measurement procedures for ducted silencers and air-terminal units – Insertion loss, flow noise and total pressure loss (ISO 7235)
• EN ISO 8528-10 — Reciprocating internal combustion engine driven alternating current generating sets – Part 10: Measurement of airborne noise (ISO 8528-10)
• EN ISO 9614-1 — Acoustics – Determination of sound power levels of noise sources using sound intensity – Part 1: Measurement at discrete points (ISO 9614-1)
• EN ISO 9614-3 — Acoustics – Determination of sound power levels of noise sources using sound intensity – Part 3: Precision method for measurement by scanning (ISO 9614-3)
• EN ISO 9902-1 — Textile machinery – Rumore test code – Part 1: Common requirements (ISO 9902-1)
• EN ISO 9902-2 — Textile machinery – Rumore test code – Part 2: Spinning preparatory and spinning machinery (ISO 9902-2)
• EN ISO 9902-3 — Textile machinery – Rumore test code – Part 3: Nonwoven machinery (ISO 9902-3)
• EN ISO 9902-4 — Textile machinery – Rumore test code – Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4)
• EN ISO 9902-5 — Textile machinery – Rumore test code – Part 5: Weaving and knitting preparatory machinery (ISO 9902-5)
• EN ISO 9902-6 — Textile machinery – Rumore test code – Part 6: Fabric manufacturing machinery (ISO 9902-6)
• EN ISO 9902-7 — Textile machinery – Rumore test code – Part 7: Dyeing and finishing machinery (ISO 9902-7)
• EN ISO/IEC 80079-38 — Explosive atmospheres – Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38)

Energie, fluid power e sistemi tecnici (18)

• EN 12312-19 — Aircraft ground support equipment – Specific requirements – Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions
• EN 12622 — Safety of machine tools – Oleoidraulico press brakes
• EN 13001-3-6 — Cranes – General design – Part 3-6: Limit states and proof of competence – Hydraulic cylinders
• EN 14673 — Sicurezza del macchinario – Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals
• EN 1804-1 — Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 1: Support units and general requirements
• EN 1804-2 — Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 2: Power set legs and rams
• EN 1804-3 — Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 3: Hydraulic and electro-hydraulic control systems
• EN 474-5 — Macchine movimento terra – Safety – Part 5: Requirements for hydraulic excavators
• EN 50059 — Hand-held electrostatic application equipment for non- ignitable liquid coating materials – Safety requirements
• EN 50176 — Automatic electrostatic application systems for ignitable liquid coating materials – Safety requirements
• EN 50223 — Stationary electrostatic application equipment for ignitable flock material – Safety requirements
• EN 50348 — Stationary electrostatic application equipment for non- ignitable liquid coating material – Safety requirements
• EN 741 — Continuous handling equipment and systems – Safety requirements for systems and their components for pneumatic handling of bulk materials
• EN 81-3 — Safety rules for the construction and installation of lifts – Part 3: Electric and hydraulic service lifts
• EN ISO 16092-3 — Machine tools safety – Presses – Part 3: Safety requirements for hydraulic presses (ISO 16092-3)
• EN ISO 16092-4 — Machine tools safety – Presses – Part 4: Safety requirements for pneumatic presses (ISO 16092-4)
• EN ISO 4413 — Hydraulic fluid power – General rules and safety requirements for systems and their components (ISO 4413)
• EN ISO 4414 — Pneumatic fluid power – General rules and safety requirements for systems and their components (ISO 4414)

Ascensori, piattaforme ed elevatori (26)

• EN 115-1 — Safety of escalators and moving walks – Part 1: Construction and installation
• EN 12016 — Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Immunity
• EN 12158-1 — Builders’ hoists for goods – Part 1: Hoists with accessible platforms
• EN 12312-8 — Aircraft ground support equipment – Specific requirements – Part 8: Maintenance or service stairs and platforms
• EN 12385-5 — Steel wire ropes – Safety – Part 5: Stranded ropes for lifts
• EN 13015 — Maintenance for lifts and escalators – Rules for maintenance instructions
• EN 13367 — Ceramic machines – Safety – Transfer platforms and cars
• EN 1493 — Vehicle lifts
• EN 1494 — Mobile or movable jacks and associated lifting equipment
• EN 1495 — Lifting platforms – Mast climbing work platforms
• EN 15095 — Power-operated mobile racking and shelving, carousels and storage lifts – Safety requirements
• EN 1570-1 — Safety requirements for lifting tables – Part 1: Lifting tables serving up to two fixed landing
• EN 1570-2 — Safety requirements for lifting tables – Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s
• EN 16719 — Transport platforms
• EN 16952 — Macchine agricole – Rough-terrain Work Platforms for Orchard’s operations (WPO) – Safety
• EN 1756-1 — Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 1: Tail lifts for goods
• EN 1756-2 — Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 2: Tail lifts for passengers
• EN 1808 — Safety requirements for suspended access equipment – Design calculations, stability criteria, construction – Examinations and tests
• EN 280-1 — Mobile elevating work platforms – Part 1: Design calculations – Stability criteria – Construction – Safety – Examinations and tests
• EN 280-2 — Mobile elevating work platforms – Part 2: Additional safety requirements for load lifting appliances on the extending lifting structure and work platform
• EN 81-31 — Safety rules for the construction and installation of lifts – Part 31: Accessible goods only lifts
• EN 81-40 — Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility
• EN 81-41 — Safety rules for the construction and installation of lifts – Part 41: Vertical lifting platforms for persons with impaired mobility
• EN 81-43 — Safety rules for the construction and installation of lifts – Part 43: Lifts for cranes
• EN 81-44 — Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 44: Lifting appliances in wind turbines
• EN ISO 14122-2 — Safety of machinery – Permanent means of access – Part 2: Working platforms and walkways (ISO 14122-2)

Apparecchi di sollevamento, gru e accessori (28)

• EN 12077-2 — Crane safety – Requirements for health and safety – Part 2: Limiting and indicating devices
• EN 12644-1 — Cranes – Information for use and testing – Part 1: Instructions
• EN 12644-2 — Cranes – Information for use and testing – Part 2: Marking
• EN 12999 — Cranes – Loader cranes
• EN 13000 — Cranes – Mobile cranes
• EN 13001-1 — Cranes – General design – Part 1: General principles and requirements
• EN 13001-2 — Cranes – General design – Part 2: Load actions
• EN 13001-3-1 — Cranes – General design – Part 3-1: Limit states and proof of competence of steel structure
• EN 13001-3-2 — Cranes – General design – Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
• EN 13001-3-3 — Cranes – General design – Part 3-3: Limit states and proof of competence of wheel/rail contacts
• EN 13001-3-5 — Cranes – General design – Part 3-5: Limit states and proof of competence of forged and cast hooks
• EN 13135 — Cranes – Safety – Design – Requirements for equipment
• EN 13155 — Cranes – Safety – Non-fixed load lifting attachments
• EN 13157 — Cranes – Safety – Hand powered cranes
• EN 13557 — Cranes – Control devices and control stations
• EN 13586 — Cranes – Access
• EN 13852-1 — Cranes – Offshore cranes – Part 1: General-purpose offshore cranes
• EN 13852-3 — Cranes – Offshore cranes – Part 3: Light offshore cranes
• EN 14238 — Cranes – Manually controlled load manipulating devices
• EN 14439 — Cranes – Safety – Tower cranes
• EN 14492-1 — Cranes – Power driven winches and hoists – Part 1: Power driven winches
• EN 14492-2 — Cranes – Power driven winches and hoists – Part 2: Power driven hoists
• EN 14502-2 — Cranes – Equipment for the lifting of persons – Part 2: Elevating control stations
• EN 14985 — Cranes – Slewing jib cranes
• EN 15011 — Cranes – Bridge and gantry cranes
• EN 15056 — Cranes – Requirements for container handling spreaders
• EN 16851 — Cranes – Light crane systems
• EN 17076 — Tower cranes – Anti-collision systems – Safety requirements

Carrelli industriali e fuoristrada (16)

• EN 1175 — Safety of industrial trucks – Electrical/electronic requirements
• EN 1459-1 — Rough-terrain trucks – Safety requirements and verification – Part 1: Variable-reach trucks
• EN 1459-2 — Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks
• EN 1459-4 — Rough-terrain trucks – Safety requirements and verification – Part 4: Additional requirements for variable-reach trucks handling freely suspended loads
• EN 1459-5 — Rough-terrain trucks – Safety requirements and verification – Part 5: Attachment interface
• EN 15000 — Safety of industrial trucks – Self propelled variable reach trucks – Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters
• EN 1526 — Safety of industrial trucks – Additional requirements for automated functions on trucks
• EN 16203 — Safety of Industrial Trucks – Dynamic tests for verification of lateral stability – Counterbalanced Trucks
• EN 16307-1 — Carrelli industriali – Safety requirements and verification – Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable- reach trucks and burden-carrier trucks
• EN 16307-5 — Carrelli industriali – Safety requirements and verification – Part 5: Supplementary requirements for pedestrian- propelled trucks
• EN 16307-6 — Carrelli industriali – Safety requirements and verification – Part 6: Supplementary requirements for burden and personnel carriers
• EN ISO 18063-2 — Rough-terrain trucks – Visibility test methods and their verification – Part 2: Slewing rough-terrain variable-reach trucks (ISO 18063-2)
• EN ISO 3691-1 — Carrelli industriali – Safety requirements and verification – Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1, including Cor 1)
• EN ISO 3691-4 — Carrelli industriali – Safety requirements and verification – Part 4: Driverless industrial trucks and their systems (ISO 3691-4)
• EN ISO 3691-5 — Carrelli industriali – Safety requirements and verification – Part 5: Pedestrian-propelled trucks (ISO 3691-5)
• EN ISO 3691-6 — Carrelli industriali – Safety requirements and verification – Part 6: Burden and personnel carriers (ISO 3691-6)

Macchine per imballaggio (9)

• EN 1034-26 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 26: Roll packaging machines
• EN 415-1 — Safety of packaging machines – Part 1: Terminology and classification of packaging machines and associated equipment
• EN 415-10 — Safety of packaging machines – Part 10: General Requirements
• EN 415-2 — Safety of packaging machines – Part 2: Packaging machines for pre-formed rigid containers
• EN 415-3 — Safety of packaging machines – Part 3: Form, fill and seal machines; fill and seal machines
• EN 415-5 — Safety of packaging machines – Part 5: Wrapping machines
• EN 415-6 — Safety of packaging machines – Part 6: Pallet wrapping machines
• EN 415-7 — Safety of packaging machines – Part 7: Group and secondary packaging machines
• EN 415-8 — Safety of packaging machines – Part 8: Strapping machines

Macchine per industria alimentare (45)

• EN 12041 — Macchine per l’industria alimentare – Moulders – Safety and hygiene requirements
• EN 12042 — Macchine per l’industria alimentare – Automatic dough dividers – Safety and hygiene requirements
• EN 12043 — Macchine per l’industria alimentare – Intermediate provers – Safety and hygiene requirements
• EN 12267 — Macchine per l’industria alimentare – Circular saw machines – Safety and hygiene requirements
• EN 12268 — Macchine per l’industria alimentare – Band saw machines – Safety and hygiene requirements
• EN 12331 — Macchine per l’industria alimentare – Mincing machines – Safety and hygiene requirements
• EN 12355 — Macchine per l’industria alimentare – Derinding-, skinning- and membrane removal machines – Safety and hygiene requirements
• EN 12463 — Macchine per l’industria alimentare – Filling machines and auxiliary machines – Safety and hygiene requirements
• EN 12505 — Macchine per l’industria alimentare – Centrifugal machines for processing edible oils and fats – Safety and hygiene requirements
• EN 12852 — Macchine per l’industria alimentare – Food processors and blenders – Safety and hygiene requirements
• EN 12853 — Macchine per l’industria alimentare – Hand-held blenders and whisks – Safety and hygiene requirements
• EN 12854 — Macchine per l’industria alimentare – Beam mixers – Safety and hygiene requirements
• EN 12855 — Macchine per l’industria alimentare – Rotating bowl cutters – Safety and hygiene requirements
• EN 12984 — Macchine per l’industria alimentare – Portable and/or hand-guided machines and appliances with mechanically driven cutting tools – Safety and hygiene requirements
• EN 13208 — Macchine per l’industria alimentare – Vegetable peelers – Safety and hygiene requirements
• EN 13288 — Macchine per l’industria alimentare – Bowl lifting and tilting machines – Safety and hygiene requirements
• EN 13389 — Macchine per l’industria alimentare – Mixers with horizontal shafts – Safety and hygiene requirements
• EN 13390 — Macchine per l’industria alimentare – Pie and tart machines – Safety and hygiene requirements
• EN 13534 — Macchine per l’industria alimentare – Curing injection machines – Safety and hygiene requirements
• EN 13570 — Macchine per l’industria alimentare – Mixing machines – Safety and hygiene requirements
• EN 13591 — Macchine per l’industria alimentare – Fixed deck oven loaders – Safety and hygiene requirements
• EN 13621 — Macchine per l’industria alimentare – Salad dryers – Safety and hygiene requirements
• EN 13732 — Macchine per l’industria alimentare – Bulk milk coolers on farms – Requirements for performance, safety and hygiene
• EN 13870 — Macchine per l’industria alimentare – Portion cutting machines – Safety and hygiene requirements
• EN 13871 — Macchine per l’industria alimentare – Cubes cutting machinery – Safety and hygiene requirements
• EN 13885 — Macchine per l’industria alimentare – Clipping machines – Safety and hygiene requirements
• EN 13886 — Macchine per l’industria alimentare – Cooking kettles equipped with powered stirrer and/or mixer – Safety and hygiene requirements
• EN 13954 — Macchine per l’industria alimentare – Bread slicers – Safety and hygiene requirements
• EN 14655 — Macchine per l’industria alimentare – Baguette slicers – Safety and hygiene requirements
• EN 14957 — Macchine per l’industria alimentare – Dishwashing machines with conveyor – Safety and hygiene requirements
• EN 14958 — Macchine per l’industria alimentare – Machinery for grinding and processing flour and semolina – Safety and hygiene requirements
• EN 15166 — Macchine per l’industria alimentare – Automatic back splitting machines of butchery carcasses – Safety and hygiene requirements
• EN 15180 — Macchine per l’industria alimentare – Food depositors – Safety and hygiene requirements
• EN 15774 — Macchine per l’industria alimentare – Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) – Safety and hygiene requirements
• EN 15861 — Macchine per l’industria alimentare – Smokehouses – Safety and hygiene requirements
• EN 1673 — Macchine per l’industria alimentare – Rotary rack ovens – Safety and hygiene requirements
• EN 1674 — Macchine per l’industria alimentare – Dough sheeters – Safety and hygiene requirements
• EN 16743 — Macchine per l’industria alimentare – Automatic industrial slicing machines – Safety and hygiene requirements
• EN 1678 — Macchine per l’industria alimentare – Vegetable cutting machines – Safety and hygiene requirements
• EN 17677 — Macchine per l’industria alimentare – Craft bakery and pastry depositors – Safety and hygiene requirements
• EN 1974 — Macchine per l’industria alimentare – Slicing machines – Safety and hygiene requirements
• EN 453 — Macchine per l’industria alimentare – Dough mixers – Safety and hygiene requirements
• EN 454 — Macchine per l’industria alimentare – Planetary mixers – Safety and hygiene requirements
• EN 60335-2-89 — Household and similar electrical appliances – Safety – Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
• EN IEC 60335-2-89 — Household and similar electrical appliances – Safety – Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor EN IEC 60335-2-89

Macchine agricole, forestali e vitivinicole (58)

• EN 12525 — Macchine agricole – Front loaders – Safety
• EN 12733 — Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety
• EN 13448 — Agricultural and forestry machinery – Inter-row mowing units – Safety
• EN 13525 — Forestry machinery – Wood chippers – Safety
• EN 1374 — Macchine agricole – Silos stationary unloaders for round silos – Safety
• EN 14930 — Agricultural and forestry machinery and gardening equipment – Pedestrian controlled and hand-held machines – Determination of accessibility of hot surfaces
• EN 16246 — Macchine agricole – Backhoes – Safety
• EN 16517 — Agricultural and forestry machinery – Mobile yarders for timber logging – Safety
• EN 17067 — Forestry machinery – Safety requirements on radio remote controls
• EN 17744 — Agricultural and forestry machinery – Environmental requirements for dusters
• EN 17923 — Equipment for vine cultivation and wine making – Safety – Must and grape harvest pumps
• EN 1853 — Macchine agricole – Trailers – Safety
• EN 609-1 — Agricultural and forestry machinery – Safety of log splitters – Part 1: Wedge splitters
• EN 609-2 — Agricultural and forestry machinery – Safety of log splitters – Part 2: Screw splitters
• EN 690 — Macchine agricole – Manure spreaders – Safety
• EN 703 — Macchine agricole – Safety – Silage loading, mixing and/or chopping and distributing machines
• EN 706 — Macchine agricole – Vine shoot tipping machines – Safety
• EN 707 — Macchine agricole – Slurry tankers – Safety
• EN 709 — Agricultural and forestry machinery – Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) – Safety
• EN 908 — Agricultural and forestry machinery – Reel machines for irrigation – Safety
• EN 909 — Agricultural and forestry machinery – Centre pivot and moving lateral types irrigation machines – Safety
• EN IEC 62841-4-3 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-3: Particular requirements for pedestrian controlled walk- behind lawnmowers EN IEC 62841-4-3
• EN ISO 11680-1 — Machinery for forestry – Safety requirements and testing for pole-mounted powered pruners – Part 1: Machines fitted with an integral combustion engine (ISO 11680-1)
• EN ISO 11680-2 — Machinery for forestry – Safety requirements and testing for pole-mounted powered pruners – Part 2: Machines for use with backpack power source (ISO 11680-2)
• EN ISO 11681-1 — Machinery for forestry – Portable chain-saw safety requirements and testing – Part 1: Chain-saws for forest service (ISO 11681-1)
• EN ISO 11681-2 — Machinery for forestry – Portable chain-saw safety requirements and testing – Part 2: Chain-saws for tree service (ISO 11681-2)
• EN ISO 11806-1 — Agricultural and forestry machinery – Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers – Part 1: Machines fitted with an integral combustion engine (ISO 11806-1)
• EN ISO 11806-2 — Agricultural and forestry machinery – Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers – Part 2: Machines for use with backpack power unit (ISO 11806-2)
• EN ISO 11850 — Machinery for forestry – General safety requirements (ISO 11850)
• EN ISO 14982 — Agricultural and forestry machinery – Electromagnetic compatibility – Test methods and acceptance criteria (ISO 14982)
• EN ISO 16119-1 — Agricultural and forestry machinery – Environmental requirements for sprayers – Part 1: General (ISO 16119- 1)
• EN ISO 16119-2 — Agricultural and forestry machinery – Environmental requirements for sprayers – Part 2: Horizontal boom sprayers (ISO 16119-2, Corrected version 2017-03)
• EN ISO 16119-3 — Agricultural and forestry machinery – Environmental requirements for sprayers – Part 3: Sprayers for bush and tree crops (ISO 16119-3)
• EN ISO 16119-4 — Agricultural and forestry machinery – Environmental requirements for sprayers – Part 4: Fixed and semi-mobile sprayers (ISO 16119-4)
• EN ISO 16230-1 — Agricultural machines and tractors – Safety of higher voltage electrical and electronic components and systems – Part 1: General requirements (ISO 16230-1)
• EN ISO 16231-1 — Self-propelled agricultural machinery – Assessment of stability – Part 1: Principles (ISO 16231-1)
• EN ISO 16231-2 — Self-propelled agricultural machinery – Assessment of stability – Part 2: Determination of static stability and test procedures (ISO 16231-2)
• EN ISO 19472-2 — Machinery for forestry – Winches – Part 2: Traction aid winches (ISO 19472-2)
• EN ISO 19932-1 — Equipment for crop protection – Knapsack sprayers – Part 1: Safety and environmental requirements (ISO 19932- 1)
• EN ISO 19932-2 — Equipment for crop protection – Knapsack sprayers – Part 2: Test methods (ISO 19932-2)
• EN ISO 25119-2 — Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 2: Concept phase (ISO 25119-2)
• EN ISO 25119-3 — Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 3: Series development, hardware and software (ISO 25119-3)
• EN ISO 25119-4 — Tractors and machinery for agriculture and forestry – Safety-related parts of control systems – Part 4: Production, operation, modification and supporting processes (ISO 25119-4)
• EN ISO 28139 — Agricultural and forestry machinery – Knapsack combustion- engine-driven mistblowers – Safety requirements (ISO 28139)
• EN ISO 4254-1 — Agricultural machinery – Safety – Part 1: General requirements (ISO 4254-1)
• EN ISO 4254-10 — Macchine agricole – Safety – Part 10: Rotary tedders and rakes (ISO 4254-10)
• EN ISO 4254-11 — Macchine agricole – Safety – Part 11: Pick-up balers (ISO 4254-11)
• EN ISO 4254-12 — Macchine agricole – Safety – Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12)
• EN ISO 4254-14 — Macchine agricole – Safety – Part 14: Bale wrappers (ISO 4254-14)
• EN ISO 4254-17 — Macchine agricole – Safety – Part 17: Root crop harvesters (ISO 4254-17)
• EN ISO 4254-5 — Agricultural machinery – Safety – Part 5: Power-driven soil-working machines (ISO 4254-5)
• EN ISO 4254-6 — Agricultural machinery – Safety – Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6)
• EN ISO 4254-7 — Agricultural machinery – Safety – Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters (ISO 4254-7)
• EN ISO 4254-8 — Macchine agricole – Safety – Part 8: Solid fertilizer distributors (ISO 4254-8)
• EN ISO 4254-9 — Macchine agricole – Safety – Part 9: Seed drills (ISO 4254-9)
• EN ISO 5395-1 — Garden equipment – Safety requirements for combustion- engine-powered lawnmowers – Part 1: Terminology and common tests (ISO 5395-1)
• EN ISO 5395-2 — Garden equipment – Safety requirements for combustion- engine-powered lawnmowers – Part 2: Pedestrian- controlled lawnmowers (ISO 5395-2)
• EN ISO 5395-3 — Garden equipment – Safety requirements for combustion- engine-powered lawnmowers – Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3)

Macchine movimento terra e costruzioni stradali (28)

• EN 13531 — Macchine movimento terra – Tip-over protection structure (TOPS) for compact excavators – Laboratory tests and performance requirements (ISO 12117 modified)
• EN 474-1 — Earth-moving machinery – Safety – Part 1: General requirements
• EN 474-10 — Macchine movimento terra – Safety – Part 10: Requirements for trenchers
• EN 474-11 — Macchine movimento terra – Safety – Part 11: Requirements for earth- and landfill compactors
• EN 474-12 — Macchine movimento terra – Safety – Part 12: Requirements for cable excavators
• EN 474-13 — Macchine movimento terra – Safety – Part 13: Requirements for rollers
• EN 474-2 — Macchine movimento terra – Safety – Part 2: Requirements for tractor-dozers
• EN 474-3 — Macchine movimento terra – Safety – Part 3: Requirements for loaders
• EN 474-4 — Macchine movimento terra – Safety – Part 4: Requirements for backhoe loaders
• EN 474-6 — Macchine movimento terra – Safety – Part 6: Requirements for dumpers
• EN 474-7 — Macchine movimento terra – Safety – Part 7: Requirements for scrapers
• EN 474-8 — Macchine movimento terra – Safety – Part 8: Requirements for graders
• EN 474-9 — Macchine movimento terra – Safety – Part 9: Requirements for pipelayers
• EN 500-1 — Mobile road construction machinery – Safety – Part 1: Common requirements
• EN 500-2 — Mobile road construction machinery – Safety – Part 2: Specific requirements for road-milling machines
• EN 500-3 — Mobile road construction machinery – Safety – Part 3: Specific requirements for soil-stabilising machines and recycling machines
• EN 500-6 — Mobile road construction machinery – Safety – Part 6: Specific requirements for paver-finishers
• EN 536 — Road construction machines – Mixing plants for road construction materials – Safety requirements
• EN ISO 2860 — Macchine movimento terra – Minimum access dimensions (ISO 2860)
• EN ISO 2867 — Macchine movimento terra – Access systems (ISO 2867)
• EN ISO 3164 — Macchine movimento terra – Laboratory evaluations of protective structures – Specifications for deflection-limiting volume (ISO 3164)
• EN ISO 3411 — Macchine movimento terra – Physical dimensions of operators and minimum operator space envelope (ISO 3411)
• EN ISO 3449 — Macchine movimento terra – Falling-object protective structures – Laboratory tests and performance requirements (ISO 3449)
• EN ISO 3450 — Macchine movimento terra – Wheeled or high-speed rubber- tracked machines – Performance requirements and test procedures for brake systems (ISO 3450)
• EN ISO 3471 — Macchine movimento terra – Roll-over protective structures – Laboratory tests and performance requirements (ISO 3471)
• EN ISO 5010 — Macchine movimento terra – Wheeled machines – Steering requirements (ISO 5010)
• EN ISO 6682 — Macchine movimento terra – Zones of comfort and reach for controls (ISO 6682, including Amd 1)
• EN ISO 6683 — Macchine movimento terra – Seat belts and seat belt anchorages – Performance requirements and tests (ISO 6683)

Macchine per lavorazione del legno (41)

• EN 1034-22 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 22: Wood Grinders
• EN 1218-3 — Safety of woodworking machines – Tenoning machines – Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers
• EN 12779 — Safety of woodworking machines – Chip and dust extraction systems with fixed installation – Safety requirements
• EN 13128 — Safety of machine tools – Milling machines (including boring machines)
• EN 16564 — Machines and plants for mining and tooling of natural stone – Safety – Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
• EN 16770 — Safety of woodworking machines – Chip and dust extraction systems for indoor installation – Safety requirements
• EN 1807-2 — Safety of woodworking machines – Band sawing machines – Part 2: Log sawing machines
• EN 1870-10 — Safety of woodworking machines – Circular sawing machines – Part 10: Single blade automatic and semi- automatic up-cutting cross-cut sawing machines
• EN 1870-11 — Safety of woodworking machines – Circular sawing machines – Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
• EN 1870-12 — Safety of woodworking machines – Circular sawing machines – Part 12: Pendulum cross-cut sawing machines
• EN 1870-15 — Safety of woodworking machines – Circular sawing machines – Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading
• EN 1870-16 — Safety of woodworking machines – Circular sawing machines – Part 16: Double mitre sawing machines for V cutting
• EN 1870-17 — Safety of woodworking machines – Circular sawing machines – Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)
• EN 1870-3 — Safety of woodworking machines – Circular sawing machines – Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
• EN 1870-5 — Safety of woodworking machines – Circular sawing machines – Part 5: Circular sawbenches/up-cutting cross- cut sawing machines
• EN 1870-6 — Safety of woodworking machines – Circular sawing machines – Part 6: Circular sawing machines for fire wood
• EN 1870-7 — Safety of woodworking machines – Circular sawing machines – Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading
• EN 1870-8 — Safety of woodworking machines – Circular sawing machines – Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading
• EN 1870-9 — Safety of woodworking machines – Circular sawing machines – Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading
• EN 60745-2-20 — Hand-held motor-operated electric tools – Safety – Part 2- 20: Particular requirements for band saws
• EN 61029-2-5 — Safety of transportable motor-operated electric tools – Part 2-5: Particular requirements for band saws
• EN 62841-2-5 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5, modified)
• EN 848-2 — Safety of woodworking machines – One side moulding machines with rotating tool – Part 2: Single spindle hand fed/integrated fed routing machines
• EN IEC 62841-3-5 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-5: Particular requirements for transportable band saws EN IEC 62841-3-5
• EN ISO 19085-1 — Woodworking machines – Safety – Part 1: Common requirements (ISO 19085-1)
• EN ISO 19085-10 — Woodworking machines – Safety – Part 10: Building site saws (contractor saws) (ISO 19085-10)
• EN ISO 19085-11 — Woodworking machines – Safety – Part 11: Combined machines (ISO 19085-11)
• EN ISO 19085-12 — Woodworking machines – Safety – Part 12: Tenoning/profiling machines (ISO 19085-12)
• EN ISO 19085-13 — Woodworking machines – Safety – Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13)
• EN ISO 19085-14 — Woodworking machines – Safety – Part 14: Four-sided moulding machines (ISO 19085-14)
• EN ISO 19085-15 — Woodworking machines – Safety – Part 15: Presses (ISO 19085-15)
• EN ISO 19085-16 — Woodworking machines – Safety – Part 16: Table band saws and band re-saws (ISO 19085-16)
• EN ISO 19085-17 — Woodworking machines – Safety – Part 17: Edge banding machines fed by chains (ISO 19085-17)
• EN ISO 19085-2 — Woodworking machines – Safety – Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2)
• EN ISO 19085-3 — Woodworking machines – Safety – Part 3: Numerically controlled (NC/CNC) boring and routing machines (ISO 19085-3)
• EN ISO 19085-4 — Woodworking machines – Safety – Part 4: Vertical panel circular sawing machines (ISO 19085-4)
• EN ISO 19085-5 — Woodworking machines – Safety – Part 5: Dimension saws (ISO 19085-5)
• EN ISO 19085-6 — Woodworking machines – Safety – Part 6: Single spindle vertical moulding machines ("toupies") (ISO 19085-6)
• EN ISO 19085-7 — Woodworking machines – Safety – Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7)
• EN ISO 19085-8 — Woodworking machines – Safety – Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085- 8)
• EN ISO 19085-9 — Woodworking machines – Safety – Part 9: Circular saw benches (with and without sliding table) (ISO 19085- 9)

Carta, stampa, tessile, cuoio e calzature (34)

• EN 1010-1 — Sicurezza del macchinario – Safety requirements for the design and construction of printing and paper converting machines – Part 1: Common requirements
• EN 1010-2 — Sicurezza del macchinario – Safety requirements for the design and construction of printing and paper converting machines – Part 2: Printing and varnishing machines including pre-press machinery
• EN 1010-3 — Sicurezza del macchinario – Safety requirements for the design and construction of printing and paper converting machines – Part 3: Cutting machines
• EN 1010-4 — Sicurezza del macchinario – Safety requirements for the design and construction of printing and paper converting machines – Part 4: Bookbinding, paper converting and finishing machines
• EN 1034-1 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 1: Common requirements
• EN 1034-13 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 13: Machines for de-wiring bales and units
• EN 1034-14 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 14: Reel splitter
• EN 1034-16 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 16: Paper and board making machines
• EN 1034-17 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 17: Tissue making machines
• EN 1034-2 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 2: Barking drums
• EN 1034-21 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 21: Coating machines
• EN 1034-27 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 27: Roll handling systems
• EN 1034-3 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 3: Rereelers and winders
• EN 1034-4 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 4: Pulpers and their loading facilities
• EN 1034-5 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 5: Sheeters
• EN 1034-6 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 6: Calender
• EN 1034-7 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 7: Chests
• EN 1034-8 — Sicurezza del macchinario – Safety requirements for the design and construction of paper making and finishing machines – Part 8: Refining plants
• EN 12203 — Footwear, leather and imitation leather goods manufacturing machines – Shoe and leather presses – Safety requirements
• EN 12387 — Footwear, leather and imitation leather goods manufacturing machines – Modular shoe repair equipment – Safety requirements
• EN 13112 — Tannery machines – Splitting and bandknife shearing machines – Safety requirements
• EN 13113 — Tannery machines – Roller coating machines – Safety requirements
• EN 13114 — Tannery machines – Rotating process vessels – Safety requirements
• EN 1492-1 — Textile slings – Safety – Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
• EN 1492-2 — Textile slings – Safety – Part 2: Roundslings made of man- made fibres for general purpose use
• EN 1492-4 — Textile slings – Safety – Part 4: Lifting slings for general service made from natural and man-made fibre ropes
• EN 972 — Tannery machines – Reciprocating roller machines – Safety requirements
• EN ISO 11111-1 — Textile machinery – Safety requirements – Part 1: Common requirements (ISO 11111-1)
• EN ISO 11111-2 — Textile machinery – Safety requirements – Part 2: Spinning preparatory and spinning machines (ISO 11111-2)
• EN ISO 11111-3 — Textile machinery – Safety requirements – Part 3: Nonwoven machinery (ISO 11111-3)
• EN ISO 11111-4 — Textile machinery – Safety requirements – Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4)
• EN ISO 11111-5 — Textile machinery – Safety requirements – Part 5: Preparatory machinery to weaving and knitting (ISO 11111- 5)
• EN ISO 11111-6 — Textile machinery – Safety requirements – Part 6: Fabric manufacturing machinery (ISO 11111-6)
• EN ISO 11111-7 — Textile machinery – Safety requirements – Part 7: Dyeing and finishing machinery (ISO 11111-7)

Plastica, gomma, fonderia e metallurgia (21)

• EN 1114-1 — Plastics and rubber machines – Extruders and extrusion lines – Part 1: Safety requirements for extruders
• EN 1114-3 — Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs
• EN 12012-1 — Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators and shredders
• EN 12012-4 — Plastics and rubber machines – Size reduction machines – Part 4: Safety requirements for agglomerators
• EN 12013 — Plastics and rubber machines – Internal mixers – Safety requirements
• EN 12301 — Plastics and rubber machines – Calenders – Safety requirements
• EN 12409 — Plastics and rubber machines – Thermoforming machines – Safety requirements
• EN 1247 — Foundry machinery – Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
• EN 1248 — Foundry machinery – Safety requirements for abrasive blasting equipment
• EN 13418 — Plastics and rubber machines – Winding machines for film or sheet – Safety requirements
• EN 1417 — Plastics and rubber machines – Two-roll mills – Safety requirements
• EN 14677 — Sicurezza del macchinario – Secondary steelmaking – Machinery and equipment for treatment of liquid steel
• EN 14886 — Plastics and rubber machines – Bandknife cutting machines for block foams – Safety requirements
• EN 15067 — Plastics and rubber machines – Film converting machines for bags and sacks – Safety requirements
• EN 1612 — Plastics and rubber machines – Reaction moulding machines and plants – Safety requirements
• EN 16474 — Plastics and rubber machines – Tyre curing machines – Safety requirements
• EN 289 — Plastics and rubber machines – Compression moulding machines and transfer moulding machines – Safety requirements
• EN 422 — Plastics and rubber machines – Blow moulding machines – Safety requirements
• EN 710 — Safety requirements for foundry moulding and coremaking machinery and plant associated equipment
• EN ISO 20430 — Plastics and rubber machines – Injection moulding machines – Safety requirements (ISO 20430)
• EN ISO 23062 — Foundry machinery – Safety requirements for molding and coremaking machinery and associated equipment (ISO 23062)

Aeroporti, ferrovie e impianti a fune (26)

• EN 12312-1 — Aircraft ground support equipment – Specific requirements – Part 1: Passenger stairs
• EN 12312-10 — Aircraft ground support equipment – Specific requirements – Part 10: Container/Pallet transfer transporters
• EN 12312-12 — Aircraft ground support equipment – Specific requirements – Part 12: Potable water service equipment
• EN 12312-13 — Aircraft ground support equipment – Specific requirements – Part 13: Lavatory service equipment
• EN 12312-14 — Aircraft ground support equipment – Specific requirements – Part 14: Disabled/incapacitated passenger boarding vehicles
• EN 12312-15 — Aircraft ground support equipment – Specific requirements – Part 15: Baggage and equipment tractors
• EN 12312-16 — Aircraft ground support equipment – Specific requirements – Part 16: Air start equipment
• EN 12312-17 — Aircraft ground support equipment – Specific requirements – Part 17: Air conditioning equipment
• EN 12312-18 — Aircraft ground support equipment – Specific requirements – Part 18: Nitrogen or Oxygen units
• EN 12312-2 — Aircraft ground support equipment – Specific requirements – Part 2: Catering vehicles
• EN 12312-20 — Aircraft ground support equipment – Specific requirements – Part 20: Electrical ground power units
• EN 12312-3 — Aircraft ground support equipment – Specific requirements – Part 3: Conveyor belt vehicles
• EN 12312-4 — Aircraft ground support equipment – Specific requirements – Part 4: Passenger boarding bridges
• EN 12312-5 — Aircraft ground support equipment – Specific requirements – Part 5: Aircraft fuelling equipment
• EN 12312-6 — Aircraft ground support equipment – Specific requirements – Part 6: Deicers and de-icing/anti-icing equipment
• EN 12312-7 — Aircraft ground support equipment – Specific requirements – Part 7: Aircraft movement equipment
• EN 12312-9 — Aircraft ground support equipment – Specific requirements – Part 9: Container/Pallet loaders
• EN 13977 — Railway applications – Track – Safety requirements for portable machines and trolleys for construction and maintenance
• EN 14033-3 — Railway applications – Track – Railbound construction and maintenance machines – Part 3: General safety requirements
• EN 14033-4 — Railway applications – Track – Railbound construction and maintenance machines – Part 4: Technical requirements for running, travelling and working on urban rail
• EN 15746-2 — Railway applications – Track – Road-rail machines and associated equipment – Part 2: General safety requirements
• EN 15954-2 — Railway applications – Track – Trailers and associated equipment – Part 2: General safety requirements
• EN 15955-2 — Railway applications – Infrastructure – Demountable machines, trailers and associated equipment – Part 2: General safety requirements
• EN 17639 — Sicurezza del macchinario – Cableway installations designed for the transport of material and specially designated persons – General safety requirements
• EN 1915-1 — Aircraft ground support equipment – General requirements – Part 1: Basic safety requirements
• EN 1915-2 — Aircraft ground support equipment – General requirements – Part 2: Stability and strength requirements, calculations and test methods

Pompe, compressori, bruciatori e impianti termici (17)

• EN 1012-1 — Compressors and vacuum pumps – Safety requirements – Part 1: Air compressors
• EN 1012-2 — Compressors and vacuum pumps – Safety requirements – Part 2: Vacuum pumps
• EN 1012-3 — Compressors and vacuum pumps – Safety requirements – Part 3: Process compressors
• EN 1028-1 — Fire-fighting pumps – Fire-fighting centrifugal pumps with primer – Part 1: Classification – General and safety requirements
• EN 1028-2 — Fire-fighting pumps – Fire-fighting centrifugal pumps with primer – Part 2: Verification of general and safety requirements
• EN 12693 — Refrigerating systems and heat pumps – Safety and environmental requirements – Positive displacement refrigerant compressors
• EN 14466 — Fire-fighting pumps – Portable pumps – Safety and performance requirements, tests
• EN 14710-1 — Fire-fighting pumps – Fire-fighting centrifugal pumps without primer – Part 1: Classification, general and safety requirements
• EN 14710-2 — Fire-fighting pumps – Fire-fighting centrifugal pumps without primer – Part 2: Verification of general and safety requirements
• EN 267 — Automatic forced draught burners for liquid fuels
• EN 303-5 — Heating boilers – Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW – Terminology, requirements, testing and marking
• EN 378-2 — Refrigerating systems and heat pumps – Safety and environmental requirements – Part 2: Design, construction, testing, marking and documentation
• EN 60335-2-40 — Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air- conditioners and dehumidifiers
• EN 676 — Automatic forced draught burners for gaseous fuels
• EN 746-1 — Industrial thermoprocessing equipment – Part 1: Common safety requirements for industrial thermoprocessing equipment
• EN 746-2 — Industrial thermoprocessing equipment – Part 2: Safety requirements for combustion and fuel handling systems
• EN 746-3 — Industrial thermoprocessing equipment – Part 3: Safety requirements for the generation and use of atmosphere gases

Utensili portatili, giardinaggio e attrezzature leggere (75)

• EN 13683 — Garden equipment – Integrally powered shredders/chippers – Safety
• EN 13684 — Garden equipment – Pedestrian controlled lawn aerators and scarifiers – Safety
• EN 14910 — Garden equipment – Walk-behind combustion engine powered trimmers – Safety
• EN 15027 — Transportable wall saw and wire saw equipment for job site – Safety
• EN 15163-2 — Machines and installations for the exploitation and processing of natural stone – Safety – Part 2: Requirements for transportable diamond wire saws
• EN 15503 — Garden equipment – Garden blowers, vacuums and blower/vacuums – Safety
• EN 15895 — Powder actuated hand-held fixing and hard marking tools – Safety requirements
• EN 16712-4 — Portable equipment for projecting extinguishing agents supplied by firefighting pumps – Portable foam equipment – Part 4: High expansion foam generators PN16
• EN 50434 — Safety of household and similar appliances – Particular requirements for mains operated shredders and chippers
• EN 50580 — Safety of hand-held electric motor operated tools – Particular requirements for spray guns
• EN 50636-2-100 — Household and similar electrical appliances – Safety – Part 2-100: Particular requirements for hand-held mains- operated garden blowers, vacuums and blower vacuums
• EN 50636-2-107 — Safety of household and similar appliances – Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers
• EN 50636-2-94 — Household and similar electrical appliances – Safety – Part 2-94: Particular requirements for scissors type grass shears
• EN 60745-1 — Hand-held motor-operated electric tools – Safety – Part 1: General requirements
• EN 60745-2-12 — Hand-held motor-operated electric tools – Safety – Part 2- 12: Particular requirements for concrete vibrators
• EN 60745-2-13 — Hand-held motor-operated electric tools – Safety – Part 2- 13: Particular requirements for chain saws
• EN 60745-2-14 — Hand-held motor-operated electric tools – Safety – Part 2- 14: Particular requirements for planers
• EN 60745-2-15 — Hand-held motor-operated electric tools – Safety – Part 2- 15: Particular requirements for hedge trimmers
• EN 60745-2-16 — Hand-held motor-operated electric tools – Safety – Part 2- 16: Particular requirements for tackers
• EN 60745-2-18 — Hand-held motor-operated electric tools – Safety – Part 2- 18: Particular requirements for strapping tools
• EN 60745-2-19 — Hand-held motor-operated electric tools – Safety – Part 2- 19: Particular requirements for jointers
• EN 60745-2-21 — Hand-held motor-operated electric tools – Safety – Part 2- 21: Particular requirements for drain cleaners
• EN 60745-2-22 — Hand-held motor-operated electric tools – Safety – Part 2- 22: Particular requirements for cut-off machines
• EN 60745-2-23 — Hand-held motor-operated electric tools – Safety – Part 2- 23: Particular requirements for die grinders and small rotary tools
• EN 60745-2-3 — Hand-held motor-operated electric tools – Safety – Part 2-3: Particular requirements for grinders, polishers and disk- type sanders
• EN 60745-2-4 — Hand-held motor-operated electric tools – Safety – Part 2-4: Particular requirements for sanders and polishers other than disk type
• EN 61029-1 — Safety of transportable motor-operated electric tools – Part 1: General requirements
• EN 61029-2-10 — Safety of transportable motor-operated electric tools – Part 2-10: Particular requirements for cutting-off grinders
• EN 61029-2-11 — Safety of transportable motor-operated electric tools – Part 2-11: Particular requirements for combined mitre and bench saws
• EN 61029-2-12 — Safety of transportable motor-operated electric tools – Part 2-12: Particular requirements for threading machines
• EN 61029-2-3 — Safety of transportable motor-operated electric tools – Part 2-3: Particular requirements for planers and thicknessers
• EN 61029-2-8 — Safety of transportable motor-operated electric tools – Part 2-8: Particular requirements for single spindle vertical moulders
• EN 61029-2-9 — Safety of transportable motor-operated electric tools – Part 2-9: Particular requirements for mitre saws
• EN 62841-1 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 1: General requirements
• EN 62841-2-1 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-1: Particular requirements for hand-held drills and impact drills
• EN 62841-2-10 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-10: Particular requirements for hand-held mixers
• EN 62841-2-11 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-11: Particular requirements for hand-held reciprocating saws
• EN 62841-2-14 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-14: Particular requirements for hand-held planers
• EN 62841-2-17 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-17: Particular requirements for hand-held routers
• EN 62841-2-2 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2, modified)
• EN 62841-2-21 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-21: Particular requirements for hand-held drain cleaners
• EN 62841-2-4 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4, modified)
• EN 62841-2-8 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-8: Particular requirements for hand-held shears and nibblers
• EN 62841-2-9 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-9: Particular requirements for hand-held tappers and threaders
• EN 62841-3-1 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1, modified)
• EN 62841-3-10 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-10: Particular requirements for transportable cut-off machines
• EN 62841-3-12 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-12: Particular requirements for transportable threading machines
• EN 62841-3-13 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-13: Particular requirements for transportable drills
• EN 62841-3-14 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-14: Particular requirements for transportable drain cleaners
• EN 62841-3-4 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-4: Particular requirements for transportable bench grinders
• EN 62841-3-6 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6, modified)
• EN 62841-3-9 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-9: Particular requirements for transportable mitre saws
• EN 62841-4-1 — Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery – Safety – Part 4-1: Particular requirements for chain saws
• EN 62841-4-2 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-2: Particular requirements for hedge trimmers
• EN IEC 62841-2-3 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders
• EN IEC 62841-2-6 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-6: Particular requirements for hand-held hammers EN IEC 62841-2-6
• EN IEC 62841-3-7 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-7: Particular requirements for transportable wall saws EN IEC 62841-3-7
• EN IEC 62841-3-9 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-9: Particular requirements for transportable mitre saws EN IEC 62841-3-9
• EN IEC 62841-4-5 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-5: Particular requirements for grass shears EN IEC 62841-4-5
• EN IEC 62841-4-7 — Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-7: Particular requirements for pedestrian controlled walk- behind lawn scarifiers and aerators EN IEC 62841-4-7
• EN ISO 10517 — Powered hand-held hedge trimmers – Safety (ISO 10517)
• EN ISO 11148-1 — Hand-held non-electric power tools – Safety requirements – Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1)
• EN ISO 11148-10 — Hand-held non-electric power tools – Safety requirements – Part 10: Compression power tools (ISO 11148-10)
• EN ISO 11148-11 — Hand-held non-electric power tools – Safety requirements – Part 11: Nibblers and shears (ISO 11148-11)
• EN ISO 11148-12 — Hand-held non-electric power tools – Safety requirements – Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12)
• EN ISO 11148-13 — Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools (ISO 11148-13)
• EN ISO 11148-2 — Hand-held non-electric power tools – Safety requirements – Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2)
• EN ISO 11148-3 — Hand-held non-electric power tools – Safety requirements – Part 3: Drills and tappers (ISO 11148-3)
• EN ISO 11148-4 — Hand-held non-electric power tools – Safety requirements – Part 4: Non-rotary percussive power tools (ISO 11148- 4)
• EN ISO 11148-5 — Hand-held non-electric power tools – Safety requirements – Part 5: Rotary percussive drills (ISO 11148-5)
• EN ISO 11148-6 — Hand-held non-electric power tools – Safety requirements – Part 6: Assembly power tools for threaded fasteners (ISO 11148-6)
• EN ISO 11148-7 — Hand-held non-electric power tools – Safety requirements – Part 7: Grinders (ISO 11148-7)
• EN ISO 11148-8 — Hand-held non-electric power tools – Safety requirements – Part 8: Sanders and polishers (ISO 11148-8)
• EN ISO 11148-9 — Hand-held non-electric power tools – Safety requirements – Part 9: Die grinders (ISO 11148-9)
• EN ISO 19432-1 — Building construction machinery and equipment – Portable, hand-held, internal combustion engine-driven abrasive cutting machines – Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1)

Altre norme di prodotto / settoriali (254)

• EN 12001 — Conveying, spraying and placing machines for concrete and mortar – Safety requirements
• EN 12044 — Footwear, leather and imitation leather goods manufacturing machines – Cutting and punching machines – Safety requirements
• EN 12110 — Tunnelling machines – Air locks – Safety requirements
• EN 12111 — Tunnelling machines – Road headers and continuous miners – Safety requirements
• EN 12158-2 — Builders’ hoists for goods – Part 2: Inclined hoists with non- accessible load carrying devices
• EN 12159 — Builders hoists for persons and materials with vertically guided cages
• EN 12162 — Liquid pumps – Safety requirements – Procedure for hydrostatic testing
• EN 12321 — Underground mining machinery – Specification for the safety requirements of armoured face conveyors
• EN 12348 — Core drilling machines on stand – Safety
• EN 12385-1 — Steel wire ropes – Safety – Part 1: General requirements
• EN 12385-10 — Steel wire ropes – Safety – Part 10: Spiral ropes for general structural applications
• EN 12385-2 — Steel wire ropes – Safety – Part 2: Definitions, designation and classification
• EN 12385-3 — Steel wire ropes – Safety – Part 3: Information for use and maintenance
• EN 12385-4 — Steel wire ropes – Safety – Part 4: Stranded ropes for general lifting applications
• EN 12417 — Machine tools – Safety – Machining centres
• EN 12418 — Masonry and stone cutting-off machines for job site – Safety
• EN 12453 — Industrial, commercial and garage doors and gates – Safety in use of power operated doors – Requirements and test methods
• EN 12547 — Centrifuges – Common safety requirements
• EN 12581 — Coating plants – Machinery for dip coating and electrodeposition of organic liquid coating material – Safety requirements
• EN 12609 — Truck mixers – Safety requirements
• EN 12621 — Machinery for the supply and circulation of liquid coating materials – Safety requirements
• EN 12629-1 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 1: Common requirements
• EN 12629-2 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 2: Block making machines
• EN 12629-3 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 3: Slide and turntable machines
• EN 12629-4 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 4:Concrete roof tile making machines
• EN 12629-5-1 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-1: Pipe making machines manufacturing in the vertical axis
• EN 12629-5-2 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-2: Pipe making machines manufacturing in the horizontal axis
• EN 12629-5-3 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-3: Pipe prestressing machines
• EN 12629-5-4 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-4: Concrete pipe coating machines
• EN 12629-6 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products
• EN 12629-7 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 7: Stationary and mobile equipment for long line manufacture of prestressed products
• EN 12629-8 — Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
• EN 12635 — Industrial, commercial and garage doors and gates – Installation and use Warning: With regard to paragraph 5.1 and Annex D, this publication does not concern the reference to
• EN 12649 — Concrete compactors and smoothing machines – Safety
• EN 12653 — Footwear, leather and imitation leather manufacturing machines – Nailing machines – Safety requirements
• EN 12717 — Safety of machine tools – Drilling machines
• EN 12753 — Thermal cleaning systems for exhaust gas from surface treatment equipment – Safety requirements
• EN 12757-1 — Mixing machinery for coating materials – Safety requirements – Part 1: Mixing machinery for use in vehicle refinishing
• EN 12881-1 — Conveyor belts – Fire simulation flammability testing – Part 1: Propane burner tests
• EN 12881-2 — Conveyor belts – Fire simulation flammability testing – Part 2: Large scale fire test
• EN 12882 — Conveyor belts for general purpose use – Electrical and flammability safety requirements
• EN 12921-1 — Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Part 1: Common safety requirements
• EN 12921-2 — Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Part 2: Safety of machines using water based cleaning liquids
• EN 12921-3 — Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Part 3: Safety of machines using flammable cleaning liquids
• EN 12921-4 — Machines for surface cleaning and pretreatment of industrial items using liquids and vapours – Part 4: Safety of machines using halogenated solvents
• EN 12978 — Industrial, commercial and garage doors and gates – Protective devices for power operated doors and gates – Requirements and test methods
• EN 13020 — Road surface treatment machines – Safety requirements
• EN 13035-1 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 1: Storage, handling and transportation equipment inside the factory
• EN 13035-11 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 11: Drilling machines
• EN 13035-2 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 2: Storage, handling and transportation equipment outside the factory
• EN 13035-3 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 3: Cutting machines
• EN 13035-4 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 4: Tilting tables
• EN 13035-5 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 5: Machines and installations for stacking and de-stacking
• EN 13035-6 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 6: Machines for break-out
• EN 13035-7 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 7: Cutting machines for laminated glass
• EN 13035-9 — Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 9: Washing installations
• EN 13042-1 — Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 1: Gob feeder
• EN 13042-2 — Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 2: Handling machines for feeding
• EN 13042-3 — Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 3: IS machines
• EN 13042-5 — Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 5: Presses
• EN 13102 — Ceramic machines – Safety – Loading and unloading of fine clay tiles
• EN 13120 — Internal blinds – Performance requirements including safety
• EN 13204 — Powered rescue tools for fire and rescue service use – Safety and performance requirements
• EN 13241 — Industrial, commercial, garage doors and gates – Product standard, performance characteristics
• EN 13289 — Pasta processing plants – Dryers and coolers – Safety and hygiene requirements
• EN 13378 — Pasta processing plants – Pasta presses – Safety and hygiene requirements
• EN 13379 — Pasta processing plants – Spreader, stripping and cutting machine, stick return conveyor, stick magazine – Safety and hygiene requirements
• EN 13414-1 — Steel wire rope slings – Safety – Part 1: Slings for general lifting service
• EN 13414-2 — Steel wire rope slings – Safety – Part 2: Specification for information for use and maintenance to be provided by the manufacturer
• EN 13414-3 — Steel wire rope slings – Safety – Part 3: Grommets and cable- laid slings
• EN 13457 — Footwear, leather and imitation leather goods manufacturing machines – Splitting, skiving, cutting, cementing and cement drying machines – Safety requirements
• EN 13561 — External blinds and awnings – Performance requirements including safety
• EN 13617-1 — Petrol filling stations – Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
• EN 13659 — Shutters and external venetian blinds – Performance requirements including safety
• EN 13675 — Sicurezza del macchinario – Safety requirements for tube forming and rolling mills and their finishing line equipment
• EN 13731 — Lifting bag systems for fire and rescue service use – Safety and performance requirements
• EN 13862 — Floor cutting-off machines – Safety
• EN 13889 — Forged steel shackles for general lifting purposes – Dee shackles and bow shackles – Grade 6 – Safety
• EN 13898 — Machine tools – Safety – Sawing machines for cold metal
• EN 13951 — Liquid pumps – Safety requirements – Agrifoodstuffs equipment; Design rules to ensure hygiene in use
• EN 1398 — Dock levellers – Safety requirements
• EN 13985 — Machine tools – Safety – Guillotine shears
• EN 14010 — Sicurezza del macchinario – Equipment for power driven parking of motor vehicles – Safety and EMC requirements for design, manufacturing, erection and commissioning stages
• EN 14043 — High rise aerial appliances for fire and rescue service use – Turntable ladders with combined movements – Safety and performance requirements and test methods
• EN 14044 — High rise aerial appliances for fire and rescue service use – Turntable ladders with sequential movements – Safety and performance requirements and test methods
• EN 14070 — Safety of machine tools – Transfer and special-purpose machines
• EN 14656 — Sicurezza del macchinario – Safety requirements for extrusion presses for steel and non-ferrous metals
• EN 14658 — Continuous handling equipment and systems – General safety requirements for continuous handling equipment for opencast lignite mining
• EN 14681 — Sicurezza del macchinario – Safety requirements for machinery and equipment for production of steel by electric arc furnaces
• EN 14753 — Sicurezza del macchinario – Safety requirements for machinery and equipment for continuous casting of steel
• EN 14973 — Conveyor belts for use in underground installations – Electrical and flammability safety requirements
• EN 1501-1 — Refuse collection vehicles – General requirements and safety requirements – Part 1: Rear loaded refuse collection vehicles
• EN 1501-2 — Refuse collection vehicles – General requirements and safety requirements – Part 2: Side loaded refuse collection vehicles
• EN 1501-3 — Refuse collection vehicles – General requirements and safety requirements – Part 3: Front loaded refuse collection vehicles
• EN 1501-5 — Refuse collection vehicles – General requirements and safety requirements – Part 5: Lifting devices for refuse collection vehicles
• EN 15059 — Snow grooming equipment – Safety requirements
• EN 15061 — Sicurezza del macchinario – Safety requirements for strip processing line machinery and equipment
• EN 15093 — Safety of Machinery – Safety requirements for hot flat rolling mills
• EN 15094 — Safety of Machinery – Safety requirements for cold flat rolling mills
• EN 15162 — Machines and plants for mining and tooling of natural stone – Safety requirements for gang saws
• EN 15163-1 — Machines and installations for the exploitation and processing of natural stone – Safety – Part 1: Requirements for stationary diamond wire saws
• EN 15164 — Machines and plants for mining and tooling of natural stone – Safety – Requirements for chain- and belt-slotting machines
• EN 15194 — Cycles – Electrically power assisted cycles – EPAC Bicycles
• EN 15268 — Petrol filling stations – Safety requirements for the construction of submersible pump assemblies
• EN 1539 — Dryers and ovens, in which flammable substances are released – Safety requirements
• EN 1550 — Machine-tools safety – Safety requirements for the design and construction of work holding chucks
• EN 1554 — Conveyor belts – Drum friction testing
• EN 15571 — Machines and plants for mining and tooling of natural stone – Safety – Requirements for surface-finishing machines
• EN 15572 — Machines and plants for mining and tooling of natural stone – Safety – Requirements for edge finishing machines
• EN 15700 — Safety for conveyor belts for winter sport or tourist use
• EN 15830 — Rough-terrain variable reach trucks – Visibility – Test methods and verification
• EN 15949 — Sicurezza del macchinario – Safety requirements for bar mills, structural steel mills and wire rod mills
• EN 15967 — Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
• EN 15997 — All terrain vehicles (ATVs – Quads) – Safety requirements and test methods
• EN 16005 — Power operated pedestrian doorsets – Safety in use – Requirements and test methods
• EN 16029 — Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads – Single- track two-wheel motor vehicles – Safety requirements and test methods
• EN 16191 — Tunnelling machinery – Safety requirements
• EN 16228-1 — Drilling and foundation equipment – Safety – Part 1: Common requirements
• EN 16228-2 — Drilling and foundation equipment – Safety – Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
• EN 16228-3 — Drilling and foundation equipment – Safety – Part 3: Horizontal directional drilling equipment (HDD)
• EN 16228-4 — Drilling and foundation equipment – Safety – Part 4: Foundation equipment
• EN 16228-5 — Drilling and foundation equipment – Safety – Part 5: Diaphragm walling equipment
• EN 16228-6 — Drilling and foundation equipment – Safety – Part 6: Jetting, grouting and injection equipment
• EN 16228-7 — Drilling and foundation equipment – Safety – Part 7: Interchangeable auxiliary equipment
• EN 16230-1 — Leisure karts – Part 1: Safety requirements and test methods for karts
• EN 16252 — Machines for compacting waste materials or recyclable fractions – Horizontal baling presses – Safety requirements
• EN 16327 — Fire-fighting – Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
• EN 16486 — Machines for compacting waste materials or recyclable fractions – Compactors – Safety requirements
• EN 16500 — Machines for compacting waste materials or recyclable fractions – Vertical baling presses – Safety requirements
• EN 1677-1 — Components for slings – Safety – Part 1: Forged steel components, Grade 8
• EN 1677-2 — Components for slings – Safety – Part 2: Forged steel lifting hooks with latch, Grade 8
• EN 1677-3 — Components for slings – Safety – Part 3: Forged steel self- locking hooks – Grade 8
• EN 1677-4 — Components for slings – Safety – Part 4: Links, Grade 8
• EN 1677-5 — Components for slings – Safety – Part 5: Forged steel lifting hooks with latch – Grade 4
• EN 1677-6 — Components for slings – Safety – Part 6: Links – Grade 4
• EN 16774 — Sicurezza del macchinario – Safety requirements for steel converter and associated equipment
• EN 1679-1 — Reciprocating internal combustion engines – Safety – Part 1: Compression ignition engines
• EN 16808 — Petroleum, petrochemical and natural gas industries – Safety of machineries – Manual elevators
• EN 16985 — Spray booths for organic coating material – Safety requirements
• EN 17003 — Road vehicles – Roller brake testers for vehicles of more than 3,5 tons GVW – Safety requirements
• EN 17059 — Plating and anodizing lines – Safety requirements
• EN 17088 — Side curtain ventilation systems – Safety
• EN 17106-1 — Road operation machinery – Safety – Part 1: General requirements
• EN 17106-2 — Road operation machinery – Safety – Part 2: Specific requirements for road surface cleaning machines
• EN 17106-3-1 — Road operation machinery – Safety – Part 3-1: Winter service machines – Requirements for snow clearing machines with rotating tools and snow ploughs
• EN 17106-3-2 — Road operation machinery – Safety – Part 3-2: Winter service machines – Specific requirements for spreading machines
• EN 17106-4 — Road operation machinery – Safety – Part 4: Road service area maintenance machines – Requirements for grass and brush cutting machines
• EN 17281 — Safety requirements – Vehicle cleaning equipment
• EN 17352 — Power operated pedestrian entrance control equipment – Safety in use – Requirements and test methods
• EN 17624 — Determination of explosion limits of gases and vapours at elevated pressures, elevated temperatures or with oxidizers other than air
• EN 17942 — Welding and allied processes – Gas welding equipment – Safety requirements for thermoprocess equipment with open firing oxy-fuel gas welding equipment
• EN 1829-1 — High-pressure water jet machines – Safety requirements – Part 1: Machines
• EN 1829-2 — High-pressure water jet machines – Safety requirements – Part 2: Hoses, hose lines and connectors
• EN 1837 — Sicurezza del macchinario – Integral lighting of machines
• EN 1845 — Footwear manufacturing machines – Footwear moulding machines – Safety requirements
• EN 1846-2 — Firefighting and rescue service vehicles – Part 2: Common requirements – Safety and performance
• EN 1846-3 — Firefighting and rescue service vehicles – Part 3: Permanently installed equipment – Safety and performance
• EN 1889-2 — Machines for underground mines – Mobile machines working underground – Safety – Part 2: Rail locomotives
• EN 1953 — Application equipment for coating materials – Safety requirements
• EN 50569 — Household and similar electrical appliances – Safety – Particular requirements for commercial electric spin extractors
• EN 50570 — Household and similar electrical appliances – Safety – Particular requirements for commercial electric tumble dryers
• EN 50571 — Household and similar electrical appliances – Safety – Particular requirements for commercial electric washing machines
• EN 50636-2-91 — Household and similar electrical appliances – Safety – Part 2-91: Particular requirements for walk-behind and hand- held lawn trimmers and lawn edge trimmers
• EN 50636-2-92 — Household and similar electrical appliances – Safety – Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators
• EN 528 — Rail dependent storage and retrieval equipment – Safety requirements for S/R machines
• EN 60204-1 — Safety of machinery – Electrical equipment of machines – Part 1: General requirements
• EN 60204-31 — Sicurezza del macchinario – Electrical equipment of machines – Part 31: Particular safety and EMC requirements for sewing machines, units and systems
• EN 60204-32 — Sicurezza del macchinario – Electrical equipment of machines – Part 32: Requirements for hoisting machines
• EN 60204-33 — Sicurezza del macchinario – Electrical equipment of machines – Part 33: Requirements for semiconductor fabrication equipment
• EN 60335-1 — Household and similar electrical appliances – Safety – Part 1: General requirements
• EN 60335-2-102 — Household and similar electrical appliances – Safety – Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
• EN 60335-2-103 — Household and similar electrical appliances – Safety – Part 2-103: Particular requirements for drives for gates, doors and windows
• EN 60335-2-23 — Household and similar electrical appliances – Safety – Part 2-23: Particular requirements for appliances for skin or hair care
• EN 60335-2-36 — Household and similar electrical appliances – Safety – Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
• EN 60335-2-37 — Household and similar electrical appliances – Safety – Part 2-37: Particular requirements for commercial electric deep fat fryers
• EN 60335-2-42 — Household and similar electrical appliances – Safety – Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam- convection ovens
• EN 60335-2-47 — Household and similar electrical appliances – Safety – Part 2-47: Particular requirements for commercial electric boiling pans
• EN 60335-2-48 — Household and similar electrical appliances – Safety – Part 2-48: Particular requirements for commercial electric grillers and toasters
• EN 60335-2-49 — Household and similar electrical appliances – Safety – Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm
• EN 60335-2-58 — Household and similar electrical appliances – Safety – Part 2-58: Particular requirements for commercial electric dishwashing machines
• EN 60335-2-65 — Household and similar electrical appliances – Safety – Part 2-65: Particular requirements for air-cleaning appliances
• EN 60335-2-67 — Household and similar electrical appliances – Safety – Part 2-67: Particular requirements for floor treatment machines for commercial use
• EN 60335-2-68 — Household and similar electrical appliances – Safety – Part 2-68: Particular requirements for spray extraction machines, for commercial use
• EN 60335-2-69 — Household and similar electrical appliances – Safety – Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
• EN 60335-2-72 — Household and similar electrical appliances – Safety – Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use
• EN 60335-2-79 — Household and similar electrical appliances – Safety – Part 2-79: Particular requirements for high pressure cleaners and steam cleaners
• EN 60335-2-8 — Household and similar electrical appliances – Safety – Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
• EN 60335-2-95 — Household and similar electrical appliances – Safety – Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use
• EN 60335-2-97 — Household and similar electrical appliances – Safety – Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
• EN 60519-1 — Safety in installations for electroheating and electromagnetic processing – Part 1: General requirements
• EN 60947-5-3 — Low-voltage switchgear and controlgear – Part 5-3: Control circuit devices and switching elements – Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
• EN 61310-2 — Sicurezza del macchinario – Indication, marking and actuation — Part 2: Requirements for marking
• EN 61310-3 — Sicurezza del macchinario – Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators
• EN 61496-1 — Sicurezza del macchinario – Electro-sensitive protective equipment – Part 1: General requirements and tests
• EN 617 — Continuous handling equipment and systems – Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
• EN 618 — Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
• EN 61800-5-2 — Adjustable speed electrical power drive systems — Part 5-2: Safety requirements – Functional
• EN 619 — Continuous handling equipment and systems – Safety requirements for equipment for mechanical handling of unit loads
• EN 620 — Continuous handling equipment and systems – Safety requirements for fixed belt conveyors for bulk materials
• EN 62745 — Sicurezza del macchinario – Requirements for cableless control systems of machinery
• EN 809 — Pumps and pump units for liquids – Common safety requirements
• EN 818-1 — Short link chain for lifting purposes – Safety – Part 1: General conditions of acceptance
• EN 818-2 — Short link chain for lifting purposes – Safety – Part 2: Medium tolerance chain for chain slings – Grade 8
• EN 818-3 — Short link chain for lifting purposes – Safety – Part 3: Medium tolerance chain for chain slings – Grade 4
• EN 818-4 — Short link chain for lifting purposes – Safety – Part 4: Chain slings – Grade 8
• EN 818-5 — Short link chain for lifting purposes – Safety – Part 5: Chain slings – Grade 4
• EN 818-6 — Short link chain for lifting purposes – Safety – Part 6: Chain slings – Specification for information for use and maintenance to be provided by the manufacturer
• EN 818-7 — Short link chain for lifting purposes – Safety – Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)
• EN 869 — Sicurezza del macchinario – Safety requirements for pressure metal diecasting units
• EN 930 — Footwear, leather and imitation leather goods manufacturing machines – Roughing, scouring, polishing and trimming machines – Safety requirements
• EN 931 — Footwear manufacturing machines – Lasting machines – Safety requirements
• EN 957-6 — Stationary training equipment – Part 6: Treadmills, additional specific safety requirements and test methods
• EN 981 — Sicurezza del macchinario – System of auditory and visual danger and information signals
• EN IEC 60204-11 — Sicurezza del macchinario – Electrical equipment of machines – Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV
• EN IEC 60335-2-119 — Household and similar electrical appliances – Safety – Part 2-119: Particular requirements for commercial vacuum packaging appliances EN IEC 60335-2-119
• EN IEC 60335-2-41 — Household and similar electrical appliances – Safety – Particular requirements for pumps EN IEC 60335-2-41
• EN IEC 62061 — Sicurezza del macchinario – Functional safety of safety-related control systems
• EN ISO 10218-1 — Robots and robotic devices – Safety requirements for industrial robots – Part 1: Robots (ISO 10218-1)
• EN ISO 10218-2 — Robots and robotic devices – Safety requirements for industrial robots – Part 2: Robot systems and integration (ISO 10218-2)
• EN ISO 10472-1 — Safety requirements for industrial laundry machinery – Part 1: Common requirements (ISO 10472-1)
• EN ISO 10472-2 — Safety requirements for industrial laundry machinery – Part 2: Washing machines and washer-extractors (ISO 10472- 2)
• EN ISO 10472-3 — Safety requirements for industrial laundry machinery – Part 3: Washing tunnel lines including component machines (ISO 10472-3)
• EN ISO 10472-4 — Safety requirements for industrial laundry machinery – Part 4: Air dryers (ISO 10472-4)
• EN ISO 10472-5 — Safety requirements for industrial laundry machinery – Part 5: Flatwork ironers, feeders and folders (ISO 10472-5)
• EN ISO 10472-6 — Safety requirements for industrial laundry machinery – Part 6: Ironing and fusing presses (ISO 10472-6)
• EN ISO 10821 — Industrial sewing machines – Safety requirements for sewing machines, units and systems (ISO 10821)
• EN ISO 11102-1 — Reciprocating internal combustion engines – Handle starting equipment – Part 1: Safety requirements and tests (ISO 11102-1)
• EN ISO 11102-2 — Reciprocating internal combustion engines – Handle starting equipment – Part 2: Method of testing the angle of disengagement (ISO 11102-2)
• EN ISO 11161 — Sicurezza del macchinario – Integrated manufacturing systems – Basic requirements (ISO 11161)
• EN ISO 13482 — Robots and robotic devices – Safety requirements for personal care robots (ISO 13482)
• EN ISO 13766-2 — Earth-moving and building construction machinery – Electromagnetic compatibility (EMC) of machines with internal electrical power supply – Part 2: Additional EMC requirements for functional safety (ISO 13766-2)
• EN ISO 14118 — Sicurezza del macchinario – Prevention of unexpected start-up (ISO 14118)
• EN ISO 14122-1 — Safety of machinery – Permanent means of access – Part 1: Choice of fixed means and general requirements (ISO 14122-1)
• EN ISO 14122-3 — Safety of machinery – Permanent means of access – Part 3: Stairs, stepladders and guard-rails (ISO 14122-3)
• EN ISO 14122-4 — Safety of machinery – Permanent means of access – Part 4: Fixed ladders (ISO 14122-4)
• EN ISO 14159 — Sicurezza del macchinario – Hygiene requirements for the design of machinery (ISO 14159)
• EN ISO 14314 — Reciprocal internal combustion engines – Recoil starting equipment – General safety requirements (ISO 14314)
• EN ISO 16089 — Machine tools – Safety – Stationary grinding machines (ISO 16089)
• EN ISO 16092-1 — Machine tools safety – Presses – Part 1: General safety requirements (ISO 16092-1)
• EN ISO 16092-2 — Machine tools safety – Presses – Part 2: Safety requirement for mechanical presses (ISO 16092-2)
• EN ISO 16093 — Machine tools – Safety – Sawing machines for cold metal (ISO 16093)
• EN ISO 17916 — Safety of thermal cutting machines (ISO 17916)
• EN ISO 19225 — Underground mining machines – Mobile extracting machines at the face – Safety requirements for shearer loaders and plough systems (ISO 19225)
• EN ISO 19296 — Mining – Mobile machines working underground – Machine safety (ISO 19296)
• EN ISO 20607 — Sicurezza del macchinario – Instruction handbook – General drafting principles (ISO 20607)
• EN ISO 21904-1 — Health and safety in welding and allied processes – Equipment for capture and separation of welding fume – Part 1: General requirements (ISO 21904-1)
• EN ISO 22291 — Safety requirements for wetlaid-nonwoven machinery (ISO 22291)
• EN ISO 23125 — Machine tools – Safety – Turning machines (ISO 23125)
• EN ISO 28881 — Machine tools – Safety – Electrical discharge machines (ISO 28881)
• EN ISO 3266 — Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266)
• EN ISO 8230-1 — Safety requirements for dry-cleaning machines – Part 1: Common safety requirements (ISO 8230-1)
• EN ISO 8230-2 — Safety requirements for dry-cleaning machines – Part 2: Machines using perchloroethylene (ISO 8230-2)
• EN ISO 8230-3 — Safety requirements for dry-cleaning machines – Part 3: Machines using combustible solvents (ISO 8230-3)
• EN ISO 8528-13 — Reciprocating internal combustion engine driven alternating current generating sets – Part 13: Safety (ISO 8528-13, Corrected version 2016-10-15)