Below is the list of applicable standards to be verified during the preparation of the Risk Analysis.

• EN 1-2 Oil-burning stoves with vaporizing burners
• EN 40-4 Lighting columns — Part 4: Requirements for reinforced and prestressed concrete lighting columns
• EN 40-5 Lighting columns — Specification for steel lighting columns
• EN 40-6 Lighting columns — Requirements for aluminium lighting columns
• EN 40-7 Lighting columns — Specification for fibre reinforced polymer composite lighting columns
• EN 54-2 Fire detection and fire alarm systems — Control and indicating equipment
• EN 54-3 Fire detection and fire alarm systems — Fire alarm devices — Sounders
• EN 54-4 Fire detection and fire alarm systems — Power supply equipment
• EN 54-5 Fire detection and fire alarm systems — Heat detectors — Point detectors
• EN 54-7 Fire detection and fire alarm systems — Smoke detectors — Point detectors using scattered light, transmitted light or ionization
• EN 54-10 Fire detection and fire alarm systems — Flame detectors — Point detectors
• EN 54-11 Fire detection and fire alarm systems — Manual call points
• EN 54-12 Fire detection and fire alarm systems — Part 12: Smoke detectors — Line detectors using an optical light beam
• EN 54-16 Fire detection and fire alarm systems — Components for fire alarm voice alarm systems — Part 16: Voice alarm control and indicating equipment
• EN 54-17 Fire detection and fire alarm systems — Part 17: Short-circuit isolators
• EN 54-18 Fire detection and fire alarm systems — Part 18: Input/output devices
• EN 54-20 Fire detection and fire alarm systems — Part 20: Aspirating smoke detectors
• EN 54-21 Fire detection and fire alarm systems — Part 21: Alarm transmission and fault warning routing equipment
• EN 54-23 Fire detection and fire alarm systems — Part 23: Fire alarm devices — Visual alarm devices
• EN 54-24 Fire detection and fire alarm systems — Part 24: Components of voice alarm systems — Loudspeakers
• EN 54-25 Fire detection and fire alarm systems — Part 25: Components using radio links
• EN 179 Building hardware — Emergency exit devices operated by a lever handle or push pad
• EN 197-1 Cement — Part 1: Composition, specifications and conformity criteria for common cements
• EN 295-1 Vitrified clay pipe systems for drains and sewers — Part 1: Requirements for pipes, fittings and joints
• EN 295-4 Vitrified clay pipe systems — Part 4: Requirements for adaptors, connectors and flexible couplings
• EN 295-5 Vitrified clay pipe systems — Part 5: Requirements for perforated pipes and fittings
• EN 295-6 Vitrified clay pipe systems — Part 6: Requirements for components of manholes and inspection chambers
• EN 295-7 Vitrified clay pipe systems — Part 7: Requirements for vitrified clay pipes and joints for pipe jacking
• EN 331 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
• EN 413-1 Masonry cement — Part 1: Composition, specifications and conformity criteria
• EN 416-1 Single burner gas-fired overhead radiant tube heaters for non-domestic use — Part 1: Safety
• EN 438-7 High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins — Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
• EN 442-1 Radiators and convectors — Part 1: Technical specifications and requirements
• EN 450-1 Fly ash for concrete — Part 1: Definition, specifications and conformity criteria
• EN 459-1 Building lime — Part 1: Definitions, specifications and conformity criteria
• EN 490 Concrete roofing tiles and fittings for roof covering and wall cladding — Product specifications
• EN 492 Fibre-cement slates and fittings — Product specification and test methods
• EN 494 Fibre-cement profiled sheets and fittings — Product specification and test methods
• EN 516 Prefabricated accessories for roofing — Installations for roof access — Walkways, tread steps and footsteps
• EN 517 Prefabricated accessories for roofing — Roof safety hooks
• EN 520 Gypsum plasterboards — Definitions, requirements and test methods
• EN 523 Steel strip sheaths for prestressing tendons — Terminology, requirements, quality control
• EN 534 Corrugated bitumen sheets — Product specification and test methods
• EN 544 Bitumen shingles with mineral and/or synthetic reinforcements — Product specification and test methods
• EN 572-9 Glass in building — Basic soda lime silicate glass products — Part 9: Evaluation of conformity/Product standard
• EN 588-2 Fibre-cement pipes for sewers and drains — Part 2: Manholes and inspection chambers
• EN 598 Ductile iron pipes, fittings, accessories and their joints for sewerage applications — Requirements and test methods
• EN 621 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
• EN 671-1 Fixed firefighting systems — Hose systems — Part 1: Hose reels with semi-rigid hose
• EN 671-2 Fixed firefighting systems — Hose systems — Part 2: Hydrant systems with lay-flat hose
• EN 681-1 Elastomeric seals — Materials requirements for pipe joint seals used in water and drainage applications — Part 1: Vulcanized rubber
• EN 681-2 Elastomeric seals — Part 2: Thermoplastic elastomers
• EN 681-3 Elastomeric seals — Part 3: Cellular materials of vulcanized rubber
• EN 681-4 Elastomeric seals — Part 4: Cast polyurethane sealing elements
• EN 682 Elastomeric seals — Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
• EN 771-1 Specification for masonry units — Part 1: Clay masonry units
• EN 771-2 Specification for masonry units — Part 2: Calcium silicate masonry units
• EN 771-3 Specification for masonry units — Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
• EN 771-4 Specification for masonry units — Part 4: Autoclaved aerated concrete masonry units
• EN 771-5 Specification for masonry units — Part 5: Manufactured stone masonry units
• EN 771-6 Specification for masonry units — Part 6: Natural stone masonry units
• EN 777-1 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 1: System D, safety
• EN 777-2 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 2: System E, safety
• EN 777-3 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 3: System F, safety
• EN 777-4 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use — Part 4: System H, safety
• EN 778 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
• EN 845-1 Specification for ancillary components for masonry — Part 1: Wall ties, tension straps, hangers and brackets
• EN 845-2 Specification for ancillary components for masonry — Part 2: Lintels
• EN 845-3 Specification for ancillary components for masonry — Part 3: Bed joint reinforcement of steel mesh
• EN 858-1 Separator systems for light liquids — Part 1: Principles of product design, performance and testing, marking and quality control
• EN 877 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings
• EN 934-2 Admixtures for concrete, mortar and grout — Part 2: Concrete admixtures
• EN 934-3 Admixtures for concrete, mortar and grout — Part 3: Admixtures for masonry mortar
• EN 934-4 Admixtures for concrete, mortar and grout — Part 4: Admixtures for grout for prestressing tendons
• EN 934-5 Admixtures for concrete, mortar and grout — Part 5: Admixtures for sprayed concrete
• EN 969 Ductile iron pipes, fittings, accessories and their joints for gas pipelines
• EN 997 Sanitary appliances — WC pans and WC suites with integral trap
• EN 998-1 Specification for mortar for masonry — Part 1: Rendering and plastering mortar
• EN 998-2 Specification for mortar for masonry — Part 2: Masonry mortar
• EN 1013 Light transmitting profiled plastic sheeting for single skin roofing, walls and ceilings
• EN 1020 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a fan to assist transportation of combustion air or combustion products
• EN 1036-2 Glass in building — Mirrors from silver-coated float glass for internal use — Part 2: Evaluation of conformity/Product standard
• EN 1051-2 Glass in building — Glass blocks and glass pavers — Part 2: Evaluation of conformity/Product standard
• EN 1057 Copper and copper alloys — Seamless, round copper tubes for water and gas in sanitary and heating applications
• EN 1090-1 Execution of steel structures and aluminium structures — Part 1: Requirements for conformity assessment of structural components
• EN 1096-4 Glass in building — Coated glass — Part 4: Evaluation of conformity/Product standard
• EN 1123-1 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems
• EN 1124-1 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems
• EN 1125 Building hardware — Panic exit devices operated by a horizontal bar, for use on escape routes
• EN 1154 Building hardware — Controlled door closing devices
• EN 1155 Building hardware — Electrically powered hold-open devices for swing doors
• EN 1158 Building hardware — Door coordinator devices
• EN 1168 Precast concrete products — Hollow core slabs
• EN 1279-5 Glass in building — Insulating glass units — Part 5: Evaluation of conformity
• EN 1304 Clay roofing tiles and fittings — Product definitions and specifications
• EN 1317-5 Road restraint systems — Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
• EN 1319 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
• EN 1337-3 Structural bearings — Part 3: Elastomeric bearings
• EN 1337-4 Structural bearings — Part 4: Roller bearings
• EN 1337-5 Structural bearings — Part 5: Pot bearings
• EN 1337-6 Structural bearings — Part 6: Rocker bearings
• EN 1337-7 Structural bearings — Part 7: Spherical and cylindrical PTFE bearings
• EN 1337-8 Structural bearings — Part 8: Guide bearings and Restraint bearings
• EN 1338 Concrete paving blocks — Requirements and test methods
• EN 1339 Concrete paving flags — Requirements and test methods
• EN 1340 Concrete kerb units — Requirements and test methods
• EN 1341 Natural stone slabs for external paving — Requirements and test methods
• EN 1342 Natural stone setts for external paving — Requirements and test methods
• EN 1343 Natural stone kerbs for external paving — Requirements and test methods
• EN 1344 Clay pavers — Requirements and test methods
• EN 1423 Road marking materials — Drop on materials — Glass beads, antiskid aggregates and mixtures of the two
• EN 1433 Drainage channels for vehicular and pedestrian areas — Classification, design and testing requirements, marking and evaluation of conformity
• EN 1457-1 Chimneys — Clay/ceramic flue liners — Part 1: Flue liners operating under dry conditions
• EN 1457-2 Chimneys — Clay/ceramic flue liners — Part 2: Flue liners operating under wet conditions
• EN 1463-1 Road marking materials — Retroreflective road studs — Part 1: Initial performance requirements
• EN 1469 Natural stone products — Slab for cladding — Requirements
• EN 1504-2 Products and systems for the protection and repair of concrete structures — Part 2: Surface protection systems for concrete
• EN 1504-3 Products and systems for the protection and repair of concrete structures — Part 3: Structural and non-structural repair
• EN 1504-4 Products and systems for the protection and repair of concrete structures — Part 4: Structural bonding
• EN 1504-5 Products and systems for the protection and repair of concrete structures — Part 5: Concrete injection
• EN 1504-6 Products and systems for the protection and repair of concrete structures — Part 6: Anchoring of reinforcing steel bar
• EN 1504-7 Products and systems for the protection and repair of concrete structures — Part 7: Reinforcement corrosion protection
• EN 1520 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
• EN 1748-1-2 Glass in building — Special basic products — Borosilicate glasses — Part 1-2: Evaluation of conformity/Product standard
• EN 1748-2-2 Glass in building — Special basic products — Glass ceramics — Part 2-2: Evaluation of conformity/Product standard
• EN 1806 Chimneys — Clay/ceramic flue blocks for single wall chimneys — Requirements and test methods
• EN 1825-1 Grease separators — Part 1: Principles of design, performance and testing, marking and quality control
• EN 1856-1 Chimneys — Requirements for metal chimneys — Part 1: System chimney products
• EN 1856-2 Chimneys — Requirements for metal chimneys — Part 2: Metal flue liners and connecting flue pipes
• EN 1857 Chimneys — Components — Concrete flue liners
• EN 1858 Chimneys — Components — Concrete flue blocks
• EN 1863-2 Glass in building — Heat strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard
• EN 1873 Prefabricated accessories for roofing — Individual rooflights of plastics — Product specification and test methods
• EN 1916 Concrete pipes and fittings, unreinforced, steel fibre and reinforced
• EN 1917 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
• EN 1935 Building hardware — Single-axis hinges — Requirements and test methods
• EN 10025-1 Hot rolled products of structural steels — Part 1: General technical delivery conditions
• EN 10088-4 Stainless steels — Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
• EN 10088-5 Stainless steels — Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
• EN 10210-1 Hot finished structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions
• EN 10219-1 Cold formed welded structural hollow sections of non-alloy and fine grain steels — Part 1: Technical delivery conditions
• EN 10224 Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption
• EN 10255 Non-alloy steel tubes suitable for welding and threading — Technical delivery conditions
• EN 10311 Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids
• EN 10312 Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption
• EN 10340 Steel castings for structural uses
• EN 10343 Steels for quenching and tempering for construction purposes — Technical delivery conditions
• EN 12004 Adhesives for tiles — Requirements, evaluation of conformity, classification and designation
• EN 12050-1 Wastewater lifting plants for buildings and sites — Part 1: Lifting plants for wastewater containing faecal matter
• EN 12050-2 Wastewater lifting plants for buildings and sites — Part 2: Lifting plants for faecal-free wastewater
• EN 12050-3 Wastewater lifting plants for buildings and sites — Part 3: Lifting plants for limited applications
• EN 12050-4 Wastewater lifting plants for buildings and sites — Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter
• EN 12057 Natural stone products — Modular tiles — Requirements
• EN 12058 Natural stone products — Slabs for floors and stairs — Requirements
• EN 12094-1 Fixed firefighting systems — Components for gas extinguishing systems — Part 1: Requirements and test methods for electrical automatic control and delay devices
• EN 12094-2 Fixed firefighting systems — Components for gas extinguishing systems — Part 2: Requirements and test methods for non-electrical automatic control and delay devices
• EN 12094-3 Fixed firefighting systems — Components for gas extinguishing systems — Part 3: Requirements and test methods for manual triggering and stop devices
• EN 12094-4 Fixed firefighting systems — Components for gas extinguishing systems — Part 4: Requirements and test methods for container valve assemblies and their actuators
• EN 12094-5 Fixed firefighting systems — Components for gas extinguishing systems — Part 5: Requirements and test methods for high and low pressure selector valves and their actuators
• EN 12094-6 Fixed firefighting systems — Components for gas extinguishing systems — Part 6: Requirements and test methods for non-electrical disable devices
• EN 12094-7 Fixed firefighting systems — Components for gas extinguishing systems — Part 7: Requirements and test methods for nozzles for CO2 systems
• EN 12094-8 Fixed firefighting systems — Components for gas extinguishing systems — Part 8: Requirements and test methods for flexible connectors for CO2 systems
• EN 12094-9 Fixed firefighting systems — Components for gas extinguishing systems — Part 9: Requirements and test methods for special fire detectors
• EN 12094-10 Fixed firefighting systems — Components for gas extinguishing systems — Part 10: Requirements and test methods for pressure gauges and pressure switches
• EN 12094-11 Fixed firefighting systems — Components for gas extinguishing systems — Part 11: Requirements and test methods for mechanical weighing devices
• EN 12094-12 Fixed firefighting systems — Components for gas extinguishing systems — Part 12: Requirements and test methods for pneumatic alarm devices
• EN 12094-13 Fixed firefighting systems — Components for gas extinguishing systems — Part 13: Requirements and test methods for check valves and non-return valves
• EN 12101-1 Smoke and heat control systems — Part 1: Specification for smoke barriers
• EN 12101-2 Smoke and heat control systems — Part 2: Specification for natural smoke and heat exhaust ventilators
• EN 12101-3 Smoke and heat control systems — Part 3: Specification for powered smoke and heat exhaust ventilators
• EN 12101-6 Smoke and heat control systems — Part 6: Specification for pressure differential systems
• EN 12101-7 Smoke and heat control systems — Part 7: Smoke duct sections
• EN 12101-8 Smoke and heat control systems — Part 8: Smoke control dampers
• EN 12101-10 Smoke and heat control systems — Part 10: Power supplies
• EN 12150-2 Glass in building — Thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard
• EN 12209 Building hardware — Locks and latches — Mechanically operated locks, latches and locking plates — Requirements and test methods
• EN 12259-1 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 1: Sprinklers
• EN 12259-2 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 2: Wet alarm valve assemblies
• EN 12259-3 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 3: Dry alarm valve assemblies
• EN 12259-4 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 4: Water motor alarms
• EN 12259-5 Fixed firefighting systems — Components for sprinkler and water spray systems — Part 5: Water flow detectors
• EN 12271 Surface dressing — Requirements
• EN 12273 Slurry surfacing — Requirements
• EN 12285-2 Workshop fabricated steel tanks — Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
• EN 12326-1 Slate and stone for discontinuous roofing and external cladding — Part 1: Specifications for slate and carbonate slate
• EN 12337-2 Glass in building — Chemically strengthened soda lime silicate glass — Part 2: Evaluation of conformity/Product standard
• EN 12352 Traffic control equipment — Warning and safety light devices
• EN 12368 Traffic control equipment — Signal heads
• EN 12380 Air admittance valves for drainage systems — Requirements, test methods and evaluation of conformity
• EN 12446 Chimneys — Components — Concrete outer wall elements
• EN 12467 Fibre-cement flat sheets — Product specification and test methods
• EN 12566-1 Small wastewater treatment systems for up to 50 PT — Part 1: Prefabricated septic tanks
• EN 12566-3 Small wastewater treatment systems for up to 50 PT — Part 3: Packaged and/or site assembled domestic wastewater treatment plants
• EN 12566-4 Small wastewater treatment systems for up to 50 PT — Part 4: Septic tanks assembled in situ from prefabricated kits
• EN 12566-6 Small wastewater treatment systems for up to 50 PT — Part 6: Prefabricated treatment units for septic tank effluent
• EN 12566-7 Small wastewater treatment systems for up to 50 PT — Part 7: Prefabricated tertiary treatment units
• EN 12591 Bitumen and bituminous binders — Specifications for paving grade bitumens
• EN 12602 Prefabricated reinforced components of autoclaved aerated concrete
• EN 12676-1 Anti-glare systems for roads — Part 1: Performance and characteristics
• EN 12737 Precast concrete products — Floor slats for livestock housing
• EN 12764 Sanitary appliances — Specification for whirlpool baths
• EN 12794 Precast concrete products — Foundation piles
• EN 12809 Residential independent boilers fired by solid fuel — Nominal heat output up to 50 kW — Requirements and test methods
• EN 12815 Residential cookers fired by solid fuel — Requirements and test methods
• EN 12839 Precast concrete products — Elements for fences
• EN 12843 Precast concrete products — Masts and poles
• EN 12859 Gypsum blocks — Definitions, requirements and test methods
• EN 12860 Gypsum based adhesives for gypsum blocks — Definitions, requirements and test methods
• EN 12878 Pigments for the colouring of building materials based on cement and/or lime — Specifications and methods of test
• EN 12899-1 Fixed, vertical road traffic signs — Part 1: Fixed signs
• EN 12899-2 Fixed, vertical road traffic signs — Part 2: Transilluminated traffic bollards (TTB)
• EN 12899-3 Fixed, vertical road traffic signs — Part 3: Delineator posts and retroreflectors
• EN 12951 Prefabricated accessories for roofing — Permanently fixed roof ladders — Product specification and test methods
• EN 12966-1 Vertical road signs — Variable message signs — Part 1: Product standard
• EN 13024-2 Glass in building — Thermally toughened borosilicate safety glass — Part 2: Evaluation of conformity/Product standard
• EN 13043 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
• EN 13055-1 Lightweight aggregates — Part 1: Lightweight aggregates for concrete, mortar and grout
• EN 13055-2 Lightweight aggregates — Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
• EN 13063-1 Chimneys — System chimneys with clay/ceramic flue liners — Part 1: Requirements and test methods for sootfire resistance
• EN 13063-2 Chimneys — System chimneys with clay/ceramic flue liners — Part 2: Requirements and test methods under wet conditions
• EN 13063-3 Chimneys — System chimneys with clay/ceramic flue liners — Part 3: Requirements and test methods for air flue system chimneys
• EN 13069 Chimneys — Clay/ceramic outer walls for system chimneys — Requirements and test methods
• EN 13084-5 Free-standing industrial chimneys — Part 5: Material for brick liners — Product specifications
• EN 13084-7 Free-standing chimneys — Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
• EN 13101 Steps for underground man entry chambers — Requirements, marking, testing and evaluation of conformity
• EN 13108-1 Bituminous mixtures — Material specifications — Part 1: Asphalt Concrete
• EN 13108-2 Bituminous mixtures — Material specifications — Part 2: Asphalt Concrete for very thin layers
• EN 13108-3 Bituminous mixtures — Material specifications — Part 3: Soft Asphalt
• EN 13108-4 Bituminous mixtures — Material specifications — Part 4: Hot Rolled Asphalt
• EN 13108-5 Bituminous mixtures — Material specifications — Part 5: Stone Mastic Asphalt
• EN 13108-6 Bituminous mixtures — Material specifications — Part 6: Mastic Asphalt
• EN 13108-7 Bituminous mixtures — Material specifications — Part 7: Porous Asphalt
• EN 13139 Aggregates for mortar
• EN 13160-1 Leak detection systems — Part 1: General principles
• EN 13162 Thermal insulation products for buildings — Factory made mineral wool (MW) products — Specification
• EN 13163 Thermal insulation products for buildings — Factory made expanded polystyrene (EPS) products — Specification
• EN 13164 Thermal insulation products for buildings — Factory made extruded polystyrene foam (XPS) products — Specification
• EN 13165 Thermal insulation products for buildings — Factory made rigid polyurethane foam (PU) products — Specification
• EN 13166 Thermal insulation products for buildings — Factory made phenolic foam (PF) products — Specification
• EN 13167 Thermal insulation products for buildings — Factory made cellular glass (CG) products — Specification
• EN 13168 Thermal insulation products for buildings — Factory made wood wool (WW) products — Specification
• EN 13169 Thermal insulation products for buildings — Factory made expanded perlite board (EPB) products — Specification
• EN 13170 Thermal insulation products for buildings — Factory made expanded cork (ICB) products — Specification
• EN 13171 Thermal insulation products for buildings — Factory made wood fibre (WF) products — Specification
• EN 13224 Precast concrete products — Ribbed floor elements
• EN 13225 Precast concrete products — Linear structural elements
• EN 13229 Residential independent-fired appliances including open fires fired by solid fuels — Requirements and test methods
• EN 13240 Roomheaters fired by solid fuel — Requirements and test methods
• EN 13241 Industrial, commercial and garage doors and gates — Product standard, performance characteristics
• EN 13242 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
• EN 13245-2 Plastics — Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications — Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
• EN 13249 Geotextiles and geotextile-related products — Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
• EN 13250 Geotextiles and geotextile-related products — Characteristics required for use in the construction of railways
• EN 13251 Geotextiles and geotextile-related products — Characteristics required for use in earthworks, foundations and retaining structures
• EN 13252 Geotextiles and geotextile-related products — Characteristics required for use in drainage systems
• EN 13253 Geotextiles and geotextile-related products — Characteristics required for use in erosion control works (coastal protection, bank-revetments)
• EN 13254 Geotextiles and geotextile-related products — Characteristics required for use in the construction of reservoirs and dams
• EN 13255 Geotextiles and geotextile-related products — Characteristics required for use in the construction of canals
• EN 13256 Geotextiles and geotextile-related products — Characteristics required for use in the construction of tunnels and underground structures
• EN 13257 Geotextiles and geotextile-related products — Characteristics required for use in solid waste disposals
• EN 13263-1 Silica fume for concrete — Part 1: Definitions, requirements and conformity criteria
• EN 13265 Geotextiles and geotextile-related products — Characteristics required for use in liquid waste containment projects
• EN 13279-1 Gypsum binders and gypsum plasters — Part 1: Definitions and requirements
• EN 13282-1 Hydraulic road binders — Part 1: Rapid hardening hydraulic road binders — Composition, specifications and conformity criteria
• EN 13310 Kitchen sinks — Functional requirements and test methods
• EN 13341 Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels — Requirements and test methods
• EN 13361 Geosynthetic barriers — Characteristics required for use in the construction of reservoirs and dams
• EN 13362 Geosynthetic barriers — Characteristics required for use in the construction of canals
• EN 13383-1 Armourstone — Part 1: Specification
• EN 13407 Wall-hung urinals — Functional requirements and test methods
• EN 13450 Aggregates for railway ballast
• EN 13454-1 Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate — Part 1: Definitions and requirements
• EN 13479 Welding consumables — General product standard for filler metals and fluxes for fusion welding
• EN 13491 Geosynthetic barriers — Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
• EN 13492 Geosynthetic barriers — Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
• EN 13493 Geosynthetic barriers — Characteristics required for use in the construction of solid waste storage and disposal sites
• EN 13502 Chimneys — Requirements and test methods for clay/ceramic flue terminals
• EN 13561 External blinds — Performance requirements including safety
• EN 13564-1 Anti-flooding devices for buildings — Part 1: Requirements
• EN 13616 Overfill prevention devices for static tanks for liquid petroleum fuels
• EN 13658-1 Metal lath and beads — Definitions, requirements and test methods — Part 1: Internal plastering
• EN 13658-2 Metal lath and beads — Definitions, requirements and test methods — Part 2: External rendering
• EN 13659 Shutters — Performance requirements including safety
• EN 13693 Precast concrete products — Special roof elements
• EN 13707 Flexible sheets for waterproofing — Reinforced bitumen sheets for roof waterproofing — Definitions and characteristics
• EN 13747 Precast concrete products — Floor plates for floor systems
• EN 13748-1 Terrazzo tiles — Part 1: Terrazzo tiles for internal use
• EN 13748-2 Terrazzo tiles — Part 2: Terrazzo tiles for external use
• EN 13808 Bitumen and bituminous binders — Framework for specifying cationic bituminous emulsions
• EN 13813 Screed material and floor screeds — Screed material — Properties and requirements
• EN 13815 Fibrous gypsum plaster casts — Definitions, requirements and test methods
• EN 13830 Curtain walling — Product standard
• EN 13859-1 Flexible sheets for waterproofing — Part 1: Underlays for discontinuous roofing
• EN 13859-2 Flexible sheets for waterproofing — Part 2: Underlays for walls
• EN 13877-3 Concrete pavements — Part 3: Specifications for dowels to be used in concrete pavements
• EN 13915 Prefabricated gypsum plasterboard panels with a cellular paperboard core — Definitions, requirements and test methods
• EN 13924 Bitumen and bituminous binders — Specifications for hard paving grade bitumens
• EN 13950 Gypsum board thermal/acoustic insulation composite panels — Definitions, requirements and test methods
• EN 13956 Flexible sheets for waterproofing — Plastic and rubber sheets for roof waterproofing — Definitions and characteristics
• EN 13963 Jointing materials for gypsum boards — Definitions, requirements and test methods
• EN 13964 Suspended ceilings — Requirements and test methods
• EN 13967 Flexible sheets for waterproofing — Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet — Definitions and characteristics
• EN 13969 Flexible sheets for waterproofing — Bitumen damp proof sheets including bitumen basement tanking sheets — Definitions and characteristics
• EN 13970 Flexible sheets for waterproofing — Bitumen water vapour control layers — Definitions and characteristics
• EN 13978-1 Precast concrete products — Precast concrete garages — Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions
• EN 13984 Flexible sheets for waterproofing — Plastic and rubber water vapour control layers — Definitions and characteristics
• EN 13986 Wood-based panels for use in construction — Characteristics, evaluation of conformity and marking
• EN 14016-1 Binders for magnesite screeds — Caustic magnesia and magnesium chloride — Part 1: Definitions, requirements
• EN 14023 Bitumen and bituminous binders — Specification framework for polymer modified bitumens
• EN 14037-1 Free-hanging heating and cooling surfaces for water with a temperature below 120°C — Part 1: Pre-fabricated ceiling mounted radiant panels for heating — Specifications and requirements
• EN 14041 Resilient, textile and laminate floor coverings — Essential characteristics
• EN 14055 WC and urinal flushing cisterns
• EN 14063-1 Thermal insulation products for buildings — In-situ formed expanded clay lightweight aggregate products — Part 1: Specification for the loose-fill products before installation
• EN 14064-1 Thermal insulation products for buildings — In-situ formed loose-fill mineral wool (MW) products — Part 1: Specification for the loose-fill products before installation
• EN 14080 Timber structures — Glued laminated timber and glued solid timber — Requirements
• EN 14081-1 Timber structures — Strength graded structural timber with rectangular cross section — Part 1: General requirements
• EN 14178-2 Glass in building — Basic alkaline earth silicate glass products — Part 2: Evaluation of conformity/Product standard
• EN 14179-2 Glass in building — Heat soaked thermally toughened soda lime silicate safety glass — Part 2: Evaluation of conformity/Product standard
• EN 14188-1 Joint fillers and sealants — Part 1: Specifications for hot applied sealants
• EN 14188-2 Joint fillers and sealants — Part 2: Specifications for cold applied sealants
• EN 14188-3 Joint fillers and sealants — Part 3: Specifications for preformed joint seals
• EN 14190 Gypsum board products from reprocessing — Definitions, requirements and test methods
• EN 14195 Metal framing components for gypsum board systems — Definitions, requirements and test methods
• EN 14209 Preformed plasterboard cornices — Definitions, requirements and test methods
• EN 14216 Cement — Composition, specifications and conformity criteria for very low heat special cements
• EN 14229 Structural timber — Wood poles for overhead lines
• EN 14246 Gypsum elements for suspended ceilings — Definitions, requirements and test methods
• EN 14250 Timber structures — Product requirements for prefabricated structural members assembled with punched metal plate fasteners
• EN 14296 Sanitary appliances — Communal washing troughs
• EN 14303 Thermal insulation products for building equipment and industrial installations — Factory made mineral wool (MW) products — Specification
• EN 14304 Thermal insulation products for building equipment and industrial installations — Factory made flexible elastomeric foam (FEF) products — Specification
• EN 14305 Thermal insulation products for building equipment and industrial installations — Factory made cellular glass (CG) products — Specification
• EN 14306 Thermal insulation products for building equipment and industrial installations — Factory made calcium silicate (CS) products — Specification
• EN 14307 Thermal insulation products for building equipment and industrial installations — Factory made extruded polystyrene foam (XPS) products — Specification
• EN 14308 Thermal insulation products for building equipment and industrial installations — Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products — Specification
• EN 14309 Thermal insulation products for building equipment and industrial installations — Factory made expanded polystyrene (EPS) products — Specification
• EN 14313 Thermal insulation products for building equipment and industrial installations — Factory made polyethylene foam (PEF) products — Specification
• EN 14314 Thermal insulation products for building equipment and industrial installations — Factory made phenolic foam (PF) products — Specification
• EN 14315-1 Thermal insulation products for buildings — In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specification for the rigid foam spray system before installation
• EN 14316-1 Thermal insulation products for buildings — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation
• EN 14317-1 Thermal insulation products for buildings — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation
• EN 14318-1 Thermal insulation products for buildings — In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specification for the rigid foam dispensing system before installation
• EN 14319-1 Thermal insulation products for building equipment and industrial installations — In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specification for the rigid foam dispensing system before installation
• EN 14320-1 Thermal insulation products for building equipment and industrial installations — In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products — Part 1: Specification for the rigid foam spray system before installation
• EN 14321-2 Glass in building — Thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard
• EN 14339 Underground fire hydrants
• EN 14342 Wood flooring — Characteristics, evaluation of conformity and marking
• EN 14351-1 Windows and doors — Product standard, performance characteristics — Part 1: Windows and external pedestrian doorsets
• EN 14353 Metal beads and feature profiles for use with gypsum plasterboards — Definitions, requirements and test methods
• EN 14374 Timber structures — Structural laminated veneer lumber — Requirements
• EN 14384 Pillar fire hydrants
• EN 14388 Road traffic noise reducing devices — Specifications
• EN 14396 Fixed ladders for manholes
• EN 14399-1 High-strength structural bolting assemblies for preloading — Part 1: General requirements
• EN 14411 Ceramic tiles — Definition, classification, characteristics, assessment and verification of constancy of performance and marking
• EN 14428 Shower enclosures — Functional requirements and test methods
• EN 14449 Glass in building — Laminated glass and laminated safety glass — Evaluation of conformity/Product standard
• EN 14471 Chimneys — System chimneys with plastic system liners — Requirements and test methods
• EN 14496 Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards — Definitions, requirements and test methods
• EN 14509 Self-supporting double skin metal faced insulating panels — Factory made products — Specifications
• EN 14516 Baths for domestic purposes
• EN 14527 Shower trays for domestic purposes
• EN 14528 Bidets — Functional requirements and test methods
• EN 14545 Timber structures — Connectors — Requirements
• EN 14566 Mechanical fasteners for gypsum board systems — Definitions, requirements and test methods
• EN 14592 Timber structures — Dowel-type fasteners — Requirements
• EN 14604 Smoke alarm devices
• EN 14647 Calcium aluminate cement — Composition, specifications and conformity criteria
• EN 14680 Adhesives for non-pressure thermoplastics piping systems — Specifications
• EN 14688 Sanitary appliances — Wash basins — Functional requirements and test methods
• EN 14695 Flexible sheets for waterproofing — Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete — Definitions and characteristics
• EN 14716 Stretched ceilings — Requirements and test methods
• EN 14782 Self-supporting metal sheet for roofing, external cladding and internal lining — Product specification and requirements
• EN 14783 Fully supported metal sheet and strip for roofing, external cladding and internal lining — Product specification and requirements
• EN 14785 Residential space heating appliances fired by wood pellets — Requirements and test methods
• EN 14800 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
• EN 14814 Adhesives for thermoplastic piping systems for fluids under pressure — Specifications
• EN 14843 Precast concrete products — Stairs
• EN 14844 Precast concrete products — Box culverts
• EN 14846 Building hardware — Locks and latches — Electromechanically operated locks and striking plates — Requirements and test methods
• EN 14889-1 Fibres for concrete — Part 1: Steel fibres — Definitions, specifications and conformity
• EN 14889-2 Fibres for concrete — Part 2: Polymer fibres — Definitions, specifications and conformity
• EN 14891 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives — Requirements, test methods, assessment and verification of constancy of performance, classification and marking
• EN 14904 Surfaces for sports areas — Indoor surfaces for multi-sports use — Specification
• EN 14909 Flexible sheets for waterproofing — Plastic and rubber damp proof courses — Definitions and characteristics
• EN 14915 Solid wood panelling and cladding — Characteristics, evaluation of conformity and marking
• EN 14933 Thermal insulation and light weight fill products for civil engineering applications — Factory made products of expanded polystyrene (EPS) — Specification
• EN 14934 Thermal insulation and light weight fill products for civil engineering applications — Factory made products of extruded polystyrene (XPS) — Specification
• EN 14963 Roof coverings — Continuous skylights of plastics with or without upstands — Classification, requirements and test methods
• EN 14964 Rigid underlays for discontinuous roofing — Definitions and characteristics
• EN 14967 Flexible sheets for waterproofing — Bitumen damp proof courses — Definitions and characteristics
• EN 14989-1 Chimneys — Requirements and test methods for multi-wall chimneys — Part 1: Vertical air/flue terminals for C6-type appliances
• EN 14989-2 Chimneys — Requirements and test methods for multi-wall chimneys — Part 2: Flue and air supply ducts for sealed appliances
• EN 14991 Precast concrete products — Foundation elements
• EN 14992 Precast concrete products — Wall elements
• EN 15037-1 Precast concrete products — Beam-and-block floor systems — Part 1: Beams
• EN 15037-2 Precast concrete products — Beam-and-block floor systems — Part 2: Concrete blocks
• EN 15037-3 Precast concrete products — Beam-and-block floor systems — Part 3: Clay blocks
• EN 15037-4 Precast concrete products — Beam-and-block floor systems — Part 4: Expanded polystyrene blocks
• EN 15037-5 Precast concrete products — Beam-and-block floor systems — Part 5: Lightweight blocks for simple formwork
• EN 15048-1 Non-preloaded structural bolting assemblies — Part 1: General requirements
• EN 15050 Precast concrete products — Bridge elements
• EN 15069 Safety gas connection valves for metal hose assemblies for the connection of domestic appliances using gaseous fuel
• EN 15088 Aluminium and aluminium alloys — Structural products for construction works — Technical conditions for inspection and delivery
• EN 15102 Decorative wallcoverings — Roll and panel form
• EN 15129 Anti-seismic devices
• EN 15167-1 Ground granulated blast furnace slag for use in concrete, mortar and grout — Part 1: Definitions, specifications and conformity criteria
• EN 15250 Slow release appliances fired by solid fuel — Requirements and test methods
• EN 15258 Precast concrete products — Retaining wall elements
• EN 15274 Adhesives for general purpose structural assembly — Requirements and test methods
• EN 15275 Structural adhesives — Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
• EN 15283-1 Gypsum boards with fibrous reinforcement — Definitions, requirements and test methods — Part 1: Gypsum boards with mat reinforcement
• EN 15283-2 Gypsum boards with fibrous reinforcement — Definitions, requirements and test methods — Part 2: Gypsum fibre boards
• EN 15285 Agglomerated stone — Modular tiles for flooring (internal and external)
• EN 15286 Agglomerated stone — Slabs and tiles for wall finishes (internal and external)
• EN 15322 Bitumen and bituminous binders — Framework for specifying cut-back and fluxed bituminous binders
• EN 15368 Hydraulic binder for non-structural applications — Definition, specifications and conformity criteria
• EN 15381 Geotextiles and geotextile-related products — Characteristics required for use in pavements and asphalt overlays
• EN 15382 Geosynthetic barriers — Characteristics required for use in transportation infrastructure
• EN 15435 Precast concrete products — Normalweight and lightweight concrete shuttering blocks — Product properties and performance
• EN 15497 Structural finger jointed solid timber — Performance requirements and minimum production requirements
• EN 15498 Precast concrete products — Wood-chip concrete shuttering blocks — Product properties and performance
• EN 15501 Thermal insulation products for building equipment and industrial installations — Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products — Specification
• EN 15599-1 Thermal insulation products for building equipment and industrial installations — In-situ thermal insulation formed from expanded perlite (EP) products — Part 1: Specification for bonded and loose-fill products before installation
• EN 15600-1 Thermal insulation products for building equipment and industrial installations — In-situ thermal insulation formed from exfoliated vermiculite (EV) products — Part 1: Specification for bonded and loose-fill products before installation
• EN 15650 Ventilation for buildings — Fire dampers
• EN 15651-1 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 1: Sealants for facade elements
• EN 15651-2 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 2: Sealants for glazing
• EN 15651-3 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 3: Sealants for sanitary joints
• EN 15651-4 Sealants for non-structural use in joints in buildings and pedestrian walkways — Part 4: Sealants for pedestrian walkways
• EN 15681-2 Glass in building — Basic alumino silicate glass products — Part 2: Evaluation of conformity/Product standard
• EN 15682-2 Glass in building — Heat soaked thermally toughened alkaline earth silicate safety glass — Part 2: Evaluation of conformity/Product standard
• EN 15683-2 Glass in building — Thermally toughened soda lime silicate channel shaped safety glass — Part 2: Evaluation of conformity/Product standard
• EN 15732 Thermal insulation and light weight fill products for civil engineering applications — Factory made products of expanded clay lightweight aggregate (LWA)
• EN 15743 Supersulfated cement — Composition, specifications and conformity criteria
• EN 15814 Polymer modified bituminous thick coatings for waterproofing — Definitions, requirements and test methods
• EN 15821 Multi-firing sauna stoves fired by natural wood logs — Requirements and test methods
• EN 15824 Specifications for external renders and internal plasters based on organic binders
• EN 16034 Pedestrian doorsets, industrial, commercial, garage doors and openable windows — Product standard, performance characteristics — Fire resisting and/or smoke control characteristics
• EN 16069 Thermal insulation products for buildings — Factory made products of polyethylene foam (PEF) — Specification
• EN 16153 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings — Requirements and test methods
• EN 16240 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings — Requirements and test methods
• EN 50575 Power, control and communication cables — Cables for general applications in construction works subject to reaction to fire requirements